FCC ID B94-QCNFA324B
2x2 802.11A/B/G/N/AC WiFi + Bluetooth Module
by HP Inc.
Grantee Code: B94 Product Code: QCNFA324B
Latest application date: 2021-08-24
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-08-24 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-08-24 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-08-24 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA324 Grant Date: 05/29/2015 | 2021-08-02 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA324 Grant Date: 05/29/2015 | 2021-08-02 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA324 Grant Date: 11/06/2019 | 2021-08-02 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User guide 2018_NB | Users Manual | 2022-02-16 | PDF 1.8 MB |
| User guide-L25269-001 | Users Manual | 2022-02-16 | PDF 2 MB |
| User guide-L25269-051 | Users Manual | 2022-02-16 | PDF 2 MB |
| Internal Photos | Internal Photos | 2022-02-16 | PDF 1.5 MB |
| External Photos | External Photos | 2022-02-16 | PDF 689.2 KB |
| External Photos | External Photos | 2022-01-27 | PDF 189.8 KB |
| ID Label/Location Info | ID Label/Location Info | 2021-08-24 | PDF 61.6 KB |
| ID Label/Location Info | ID Label/Location Info | 2021-08-02 | PDF 79 KB |
| Test Setup Photos_SAR | Test Setup Photos | 2022-02-16 | PDF 968.3 KB |
| Test Report_SAR | RF Exposure Info | 2021-08-24 | PDF 1 MB |
| Test Report_SAR_Appendix B | RF Exposure Info | 2021-08-24 | PDF 2.1 MB |
| Test Report_SAR_Appendix C | RF Exposure Info | 2021-08-24 | PDF 1.4 MB |
| FCC Class II permissive change letter | Cover Letter(s) | 2021-08-24 | PDF 83.1 KB |
| FCC delegation - RPT to Frances Liang | Cover Letter(s) | 2021-08-24 | PDF 28.1 KB |
| Request for LT or STC confidentiality | Cover Letter(s) | 2021-08-24 | PDF 137 KB |
| SGS_FCC_agent_auth_letter | Cover Letter(s) | 2021-08-24 | PDF 40.7 KB |
| FCC Auth Ltr for Change of ID_ | Cover Letter(s) | 2021-08-02 | PDF 20 KB |
| QCNFA324 FCC ID Change B94-QCNFA324B | Cover Letter(s) | 2021-08-02 | PDF 148.1 KB |
| Signature Authorization QC Atheros Stanley Lin | Cover Letter(s) | 2021-08-02 | PDF 18.5 KB |
| confidentiality | Cover Letter(s) | 2021-08-02 | PDF 71.6 KB |
| Antenna report-AWAN Metadata only | Operational Description | PDF 1.9 MB | |
| Antenna report-WNC Metadata only | Operational Description | PDF 756 KB |
Application Information
| Application ID | xIC2hN24zbn8d5UCkdRx1A== |
|---|---|
| Final Action Date | 2021-08-24 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008035131 |
| Model | QCNFA324B |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 2x2 802.11A/B/G/N/AC WiFi + Bluetooth Module |
| Responsible Party | Richard P Tarsio, US Canada Technical Regulations, richard.tarsio@hp.com  , 970-898-8713 |
| Agent | Jim Jim Jim, SGS Taiwan Ltd, jim.chang@sgs.com  , 886-2-2299-3279 |
| Technical Contact | Jim Chang, SGS Taiwan Ltd, jim.chang@sgs.com , 886 2 2299 3279 |
| Non-Technical Contact | Jim Chang, SGS Taiwan Ltd, jim.chang@sgs.com , 886 2 2299 3279 |
| Test Firm | Ryan WANG, SGS Taiwan Ltd. Central RF Lab, ryan-ec.wang@sgs.com , +886-2-2299-3279 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 02/16/2022 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change : This change is to add new Host(Brand/Model Number: HP/TPN-Q272) with 2 sets of new antennas as the filing. (For NB mode, Brand : AWAN, Type : PIFA, Part Number: DQ60AYP6Y04 (AYP6Y-200010) (Ant 1), Gain values : 2.47 dBi@2.4 GHz, -1.05 dBi@5GHz, Part Number: DQ60AYP6Y04 (AYP6Y-200010) (Ant 2), Gain values : 2.35 dBi@2.4 GHz, -1.23 dBi@5GHz, Brand : WNC, Type : PIFA, Part Number: DQ6B15GA100 (81EABB15.GA1) (Ant 1), Gain values : 2.29 dBi@2.4 GHz, 0.88 dBi@5GHz, Part Number: DQ6B15GA100 (81EABB15.GA1) (Ant 2), Gain values : 1.40 dBi@2.4 GHz, 1.58 dBi@5GHz) The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are <0.1 W/kg, and <0.1 W/kg, respectively. Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| xIC2hN24zbn8d5UCkdRx1A== | 2021-08-24 | Class II permissive change or modification of presently authorized equipment |
| xFNOEe7/5mjtB288w2A2yg== | 2021-08-24 | Class II permissive change or modification of presently authorized equipment |
| nm5gCQkUntjbtDwRdwF1RQ== | 2021-08-24 | Class II permissive change or modification of presently authorized equipment |
| zkIGS2i5U9XkT7zVPwQjeQ== | 2021-08-02 | Change in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA324 Grant Date: 05/29/2015 |
| fcsnxNhzAKRRsNhZDuKuHg== | 2021-08-02 | Change in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA324 Grant Date: 05/29/2015 |
| PTxbkC5qQjuI2djx1caKbg== | 2021-08-02 | Change in identification of presently authorized equipment. Original FCC ID: PPD-QCNFA324 Grant Date: 11/06/2019 |
Equipment Authorization
Grants
TCB Grant - Application zkIGS2i5U9XkT7zVPwQjeQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 08/02/2021 Application Dated: 07/30/2021 |
| HP Inc. |
| 3390 East Harmony Road |
| Fort Collins, CO 80528 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94-QCNFA324B |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2x2 802.11A/B/G/N/AC WiFi + Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application zkIGS2i5U9XkT7zVPwQjeQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States |
Date of Grant: 08/02/2021 Application Dated: 07/30/2021 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94-QCNFA324B |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2x2 802.11A/B/G/N/AC WiFi + Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 08/24/2021 Application Dated: 08/19/2021 |
| HP Inc. |
| 3390 East Harmony Road |
| Fort Collins, CO 80528 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94-QCNFA324B |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2x2 802.11A/B/G/N/AC WiFi + Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.485 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.205 |
| Class II Permissive Change : This change is to add new Host(Brand/Model Number: HP/TPN-Q272) with 2 sets of new antennas as the filing. (For NB mode, Brand : AWAN, Type : PIFA, Part Number: DQ60AYP6Y04 (AYP6Y-200010) (Ant 1), Gain values : 2.47 dBi@2.4 GHz, -1.05 dBi@5GHz, Part Number: DQ60AYP6Y04 (AYP6Y-200010) (Ant 2), Gain values : 2.35 dBi@2.4 GHz, -1.23 dBi@5GHz, Brand : WNC, Type : PIFA, Part Number: DQ6B15GA100 (81EABB15.GA1) (Ant 1), Gain values : 2.29 dBi@2.4 GHz, 0.88 dBi@5GHz, Part Number: DQ6B15GA100 (81EABB15.GA1) (Ant 2), Gain values : 1.40 dBi@2.4 GHz, 1.58 dBi@5GHz) The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are <0.1 W/kg, and <0.1 W/kg, respectively. Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application xIC2hN24zbn8d5UCkdRx1A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States |
Date of Grant: 08/24/2021 Application Dated: 08/19/2021 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94-QCNFA324B |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2x2 802.11A/B/G/N/AC WiFi + Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.485 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.205 |
| Class II Permissive Change : This change is to add new Host(Brand/Model Number: HP/TPN-Q272) with 2 sets of new antennas as the filing. (For NB mode, Brand : AWAN, Type : PIFA, Part Number: DQ60AYP6Y04 (AYP6Y-200010) (Ant 1), Gain values : 2.47 dBi@2.4 GHz, -1.05 dBi@5GHz, Part Number: DQ60AYP6Y04 (AYP6Y-200010) (Ant 2), Gain values : 2.35 dBi@2.4 GHz, -1.23 dBi@5GHz, Brand : WNC, Type : PIFA, Part Number: DQ6B15GA100 (81EABB15.GA1) (Ant 1), Gain values : 2.29 dBi@2.4 GHz, 0.88 dBi@5GHz, Part Number: DQ6B15GA100 (81EABB15.GA1) (Ant 2), Gain values : 1.40 dBi@2.4 GHz, 1.58 dBi@5GHz) The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are <0.1 W/kg, and <0.1 W/kg, respectively. Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 08/24/2021 Application Dated: 08/19/2021 |
| HP Inc. |
| 3390 East Harmony Road |
| Fort Collins, CO 80528 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94-QCNFA324B |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2x2 802.11A/B/G/N/AC WiFi + Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Class II Permissive Change : This change is to add new Host(Brand/Model Number: HP/TPN-Q272) with 2 sets of new antennas as the filing. (For NB mode, Brand : AWAN, Type : PIFA, Part Number: DQ60AYP6Y04 (AYP6Y-200010) (Ant 1), Gain values : 2.47 dBi@2.4 GHz, -1.05 dBi@5GHz, Part Number: DQ60AYP6Y04 (AYP6Y-200010) (Ant 2), Gain values : 2.35 dBi@2.4 GHz, -1.23 dBi@5GHz, For NB mode, Brand : WNC, Type : PIFA, Part Number: DQ6B15GA100 (81EABB15.GA1) (Ant 1), Gain values : 2.29 dBi@2.4 GHz, 0.88 dBi@5GHz, Part Number: DQ6B15GA100 (81EABB15.GA1) (Ant 2), Gain values : 1.40 dBi@2.4 GHz, 1.58 dBi@5GHz) The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are <0.1 W/kg, and <0.1 W/kg, respectively. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application xFNOEe7/5mjtB288w2A2yg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States |
Date of Grant: 08/24/2021 Application Dated: 08/19/2021 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94-QCNFA324B |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2x2 802.11A/B/G/N/AC WiFi + Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Class II Permissive Change : This change is to add new Host(Brand/Model Number: HP/TPN-Q272) with 2 sets of new antennas as the filing. (For NB mode, Brand : AWAN, Type : PIFA, Part Number: DQ60AYP6Y04 (AYP6Y-200010) (Ant 1), Gain values : 2.47 dBi@2.4 GHz, -1.05 dBi@5GHz, Part Number: DQ60AYP6Y04 (AYP6Y-200010) (Ant 2), Gain values : 2.35 dBi@2.4 GHz, -1.23 dBi@5GHz, For NB mode, Brand : WNC, Type : PIFA, Part Number: DQ6B15GA100 (81EABB15.GA1) (Ant 1), Gain values : 2.29 dBi@2.4 GHz, 0.88 dBi@5GHz, Part Number: DQ6B15GA100 (81EABB15.GA1) (Ant 2), Gain values : 1.40 dBi@2.4 GHz, 1.58 dBi@5GHz) The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are <0.1 W/kg, and <0.1 W/kg, respectively. Modular Approval. Output power is conducted. This module may be installed only by the OEM or an OEM integrator. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 08/02/2021 Application Dated: 07/30/2021 |
| HP Inc. |
| 3390 East Harmony Road |
| Fort Collins, CO 80528 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94-QCNFA324B |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2x2 802.11A/B/G/N/AC WiFi + Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.08 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.0749 | ||
| 38 CC MO | 15E | 5500.0 - 5720.0 | 0.0501 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0674 |
| Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application PTxbkC5qQjuI2djx1caKbg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States |
Date of Grant: 08/02/2021 Application Dated: 07/30/2021 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94-QCNFA324B |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2x2 802.11A/B/G/N/AC WiFi + Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.08 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.0749 | ||
| 38 CC MO | 15E | 5500.0 - 5720.0 | 0.0501 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0674 |
| Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 08/24/2021 Application Dated: 08/19/2021 |
| HP Inc. |
| 3390 East Harmony Road |
| Fort Collins, CO 80528 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94-QCNFA324B |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2x2 802.11A/B/G/N/AC WiFi + Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.08 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.0749 | ||
| 38 CC MO | 15E | 5500.0 - 5720.0 | 0.0501 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0674 |
| Class II Permissive Change : This change is to add new Host(Brand/Model Number: HP/TPN-Q272) with 2 sets of new antennas as the filing. (For NB mode, Brand : AWAN, Type : PIFA, Part Number: DQ60AYP6Y04 (AYP6Y-200010) (Ant 1), Gain values : 2.47 dBi@2.4 GHz, -1.05 dBi@5GHz, Part Number: DQ60AYP6Y04 (AYP6Y-200010) (Ant 2), Gain values : 2.35 dBi@2.4 GHz, -1.23 dBi@5GHz, Brand : WNC, Type : PIFA, Part Number: DQ6B15GA100 (81EABB15.GA1) (Ant 1), Gain values : 2.29 dBi@2.4 GHz, 0.88 dBi@5GHz, Part Number: DQ6B15GA100 (81EABB15.GA1) (Ant 2), Gain values : 1.40 dBi@2.4 GHz, 1.58 dBi@5GHz) The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are <0.1 W/kg, and <0.1 W/kg, respectively. Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application nm5gCQkUntjbtDwRdwF1RQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States |
Date of Grant: 08/24/2021 Application Dated: 08/19/2021 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94-QCNFA324B |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2x2 802.11A/B/G/N/AC WiFi + Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.08 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.0749 | ||
| 38 CC MO | 15E | 5500.0 - 5720.0 | 0.0501 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0674 |
| Class II Permissive Change : This change is to add new Host(Brand/Model Number: HP/TPN-Q272) with 2 sets of new antennas as the filing. (For NB mode, Brand : AWAN, Type : PIFA, Part Number: DQ60AYP6Y04 (AYP6Y-200010) (Ant 1), Gain values : 2.47 dBi@2.4 GHz, -1.05 dBi@5GHz, Part Number: DQ60AYP6Y04 (AYP6Y-200010) (Ant 2), Gain values : 2.35 dBi@2.4 GHz, -1.23 dBi@5GHz, Brand : WNC, Type : PIFA, Part Number: DQ6B15GA100 (81EABB15.GA1) (Ant 1), Gain values : 2.29 dBi@2.4 GHz, 0.88 dBi@5GHz, Part Number: DQ6B15GA100 (81EABB15.GA1) (Ant 2), Gain values : 1.40 dBi@2.4 GHz, 1.58 dBi@5GHz) The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are <0.1 W/kg, and <0.1 W/kg, respectively. Modular Approval. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz, 5470-5725, and 5825-5850 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 08/02/2021 Application Dated: 07/30/2021 |
| HP Inc. |
| 3390 East Harmony Road |
| Fort Collins, CO 80528 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94-QCNFA324B |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2x2 802.11A/B/G/N/AC WiFi + Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.485 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.205 |
| Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application fcsnxNhzAKRRsNhZDuKuHg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States |
Date of Grant: 08/02/2021 Application Dated: 07/30/2021 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94-QCNFA324B |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2x2 802.11A/B/G/N/AC WiFi + Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.485 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.205 |
| Modular Approval. Output power listed is maximum combined conducted. This device supports 20, and 40 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |