FCC ID B94-RTL8822CEDL
802.11 a/b/g/n/ac RTL8822CE Combo Module
by HP Inc.
Grantee Code: B94 Product Code: RTL8822CEDL
Latest application date: 2020-03-03
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-03-03 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-03-03 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2020-03-03 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: TX2-RTL8822CE Grant Date: 11/02/2018 | 2020-01-31 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: TX2-RTL8822CE Grant Date: 11/02/2018 | 2020-01-31 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: TX2-RTL8822CE Grant Date: 11/02/2018 | 2020-01-31 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2020-08-30 | PDF 1.8 MB |
| Users Manual_Regulatory Notices | Users Manual | 2020-08-30 | PDF 2.3 MB |
| Internal Photos | Internal Photos | 2020-08-30 | PDF 855.5 KB |
| External Photos | External Photos | 2020-08-30 | PDF 420 KB |
| External photo | External Photos | 2020-08-30 | PDF 420 KB |
| External Photos | External Photos | 2020-07-21 | PDF 282.8 KB |
| ID Label/Location Info | ID Label/Location Info | 2020-03-03 | PDF 152.4 KB |
| ID Label/Location Info | ID Label/Location Info | 2020-01-31 | PDF 124.6 KB |
| Test Setup Photos_SAR | Test Setup Photos | 2020-08-30 | PDF 343.1 KB |
| Test Report_SAR | RF Exposure Info | 2020-03-03 | PDF 1,002.8 KB |
| Test Report_SAR_Appendix B | RF Exposure Info | 2020-03-03 | PDF 834 KB |
| Test Report_SAR_Appendix C | RF Exposure Info | 2020-03-03 | PDF 1.1 MB |
| FCC CIIPC Letter | Cover Letter(s) | 2020-03-03 | PDF 116 KB |
| FCC delegation - RPT to Frances Liang | Cover Letter(s) | 2020-03-03 | PDF 28.1 KB |
| FCC_agent_auth_letter | Cover Letter(s) | 2020-03-03 | PDF 13.9 KB |
| Request for LT or STC confidentiality | Cover Letter(s) | 2020-03-03 | PDF 79.8 KB |
| Confidentiality | Cover Letter(s) | 2020-01-31 | PDF 8.8 KB |
| FCC_agent_auth_letter_RTL8822CEDL_ | Cover Letter(s) | 2020-01-31 | PDF 18 KB |
| FCCdelegation - RPT to Frances Liang - June 2016 | Cover Letter(s) | 2020-01-31 | PDF 28.1 KB |
| New grantee_ FCC Auth Ltr for Change of ID | Cover Letter(s) | 2020-01-31 | PDF 13.7 KB |
| Original grantee_ FCC Auth Ltr for Change of ID | Cover Letter(s) | 2020-01-31 | PDF 189.2 KB |
| Regulatory WLAN Antenna_NB mode_AWAN Metadata only | Operational Description | PDF 1.4 MB | |
| Regulatory WLAN Antenna_NB mode_HB Metadata only | Operational Description | PDF 1.9 MB | |
| Regulatory WLAN Antenna_NB module_INPAQ Metadata only | Operational Description | PDF 1.2 MB | |
| Regulatory WLAN Antenna_TB mode_AWAN Metadata only | Operational Description | PDF 1.4 MB | |
| Regulatory WLAN Antenna_TB mode_HB Metadata only | Operational Description | PDF 1.9 MB | |
| Regulatory WLAN Antenna_TB module_INPAQ Metadata only | Operational Description | PDF 1.2 MB |
Application Information
| Application ID | SiF1RvDiCWcJXOFlgjE+5w== |
|---|---|
| Final Action Date | 2020-03-03 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0025126541 |
| Model | RTL8822CEDL |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | 802.11 a/b/g/n/ac RTL8822CE Combo Module |
| Responsible Party | Richard P Tarsio, US Canada Technical Regulations, richard.tarsio@hp.com  , 970-898-8713 |
| Agent | Jim Jim Jim, SGS Taiwan Ltd., jim.chang@sgs.com  , 886-2-2299-3279 |
| Technical Contact | Jim Chang, SGS Taiwan Ltd, jim.chang@sgs.com , 886 2 2299 3279 |
| Non-Technical Contact | Jim Chang, SGS Taiwan Ltd, jim.chang@sgs.com , 886 2 2299 3279 |
| Test Firm | Ryan WANG, SGS Taiwan Ltd. Electronics & Communication Lab, ryan-ec.wang@sgs.com , +886-2-2299-3279 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 08/30/2020 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change : This change is to incorporate this Module into Portable category Configuration (Brand : HP ; Model number : HSN-I34C) and antenna change as described in the following. PIFA Antenna, Supplier: AWAN, Part number: 6036B0261901 (AUP6Y-100048) (Tx1), 6036B0262201 (AUP6Y-100047) (Tx2). PIFA Antenna, Supplier: HONG-BO, Part number: 6036B0262001 (260-27404) (Tx1), 6036B0262301 (260-27403) (Tx2). PIFA Antenna, Supplier: INPAQ, Part number: 6036B0262101 (WA-P-LB-02-730) (Tx1), 6036B0261801 (WA-P-LB-02-729) (Tx2). Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body-worn accessory and simultaneous transmission use conditions are <0.1 W/kg, and 1.15 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| SiF1RvDiCWcJXOFlgjE+5w== | 2020-03-03 | Class II permissive change or modification of presently authorized equipment |
| 0AjLxVisS8iF4ZaB3l++kA== | 2020-03-03 | Class II permissive change or modification of presently authorized equipment |
| +/11vdlxsrWLQs5nDz+pdg== | 2020-03-03 | Class II permissive change or modification of presently authorized equipment |
| rzquQUmyJkhxwaIxLslAFQ== | 2020-01-31 | Change in identification of presently authorized equipment. Original FCC ID: TX2-RTL8822CE Grant Date: 11/02/2018 |
| kJLREbgL3HhzaLghoBVuYw== | 2020-01-31 | Change in identification of presently authorized equipment. Original FCC ID: TX2-RTL8822CE Grant Date: 11/02/2018 |
| KC3saECs2ZVY//E5iimN6g== | 2020-01-31 | Change in identification of presently authorized equipment. Original FCC ID: TX2-RTL8822CE Grant Date: 11/02/2018 |
Equipment Authorization
Grants
TCB Grant - Application SiF1RvDiCWcJXOFlgjE+5w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 03/03/2020 Application Dated: 03/02/2020 |
| HP Inc. |
| 3390 East Harmony Road |
| Fort Collins, CO 80528 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94-RTL8822CEDL |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11 a/b/g/n/ac RTL8822CE Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.02 |
| Class II Permissive Change : This change is to incorporate this Module into Portable category Configuration (Brand : HP ; Model number : HSN-I34C) and antenna change as described in the following. PIFA Antenna, Supplier: AWAN, Part number: 6036B0261901 (AUP6Y-100048) (Tx1), 6036B0262201 (AUP6Y-100047) (Tx2). PIFA Antenna, Supplier: HONG-BO, Part number: 6036B0262001 (260-27404) (Tx1), 6036B0262301 (260-27403) (Tx2). PIFA Antenna, Supplier: INPAQ, Part number: 6036B0262101 (WA-P-LB-02-730) (Tx1), 6036B0261801 (WA-P-LB-02-729) (Tx2). Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body-worn accessory and simultaneous transmission use conditions are <0.1 W/kg, and 1.15 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application SiF1RvDiCWcJXOFlgjE+5w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States |
Date of Grant: 03/03/2020 Application Dated: 03/02/2020 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94-RTL8822CEDL |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11 a/b/g/n/ac RTL8822CE Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.02 |
| Class II Permissive Change : This change is to incorporate this Module into Portable category Configuration (Brand : HP ; Model number : HSN-I34C) and antenna change as described in the following. PIFA Antenna, Supplier: AWAN, Part number: 6036B0261901 (AUP6Y-100048) (Tx1), 6036B0262201 (AUP6Y-100047) (Tx2). PIFA Antenna, Supplier: HONG-BO, Part number: 6036B0262001 (260-27404) (Tx1), 6036B0262301 (260-27403) (Tx2). PIFA Antenna, Supplier: INPAQ, Part number: 6036B0262101 (WA-P-LB-02-730) (Tx1), 6036B0261801 (WA-P-LB-02-729) (Tx2). Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR values for body-worn accessory and simultaneous transmission use conditions are <0.1 W/kg, and 1.15 W/kg, respectively. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 01/31/2020 Application Dated: 01/22/2020 |
| HP Inc. |
| 3390 East Harmony Road |
| Fort Collins, CO 80528 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94-RTL8822CEDL |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n/ac RTL8822CE Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.016 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.794 |
| Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application rzquQUmyJkhxwaIxLslAFQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States |
Date of Grant: 01/31/2020 Application Dated: 01/22/2020 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94-RTL8822CEDL |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n/ac RTL8822CE Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.016 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.794 |
| Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 01/31/2020 Application Dated: 01/22/2020 |
| HP Inc. |
| 3390 East Harmony Road |
| Fort Collins, CO 80528 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94-RTL8822CEDL |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11a/b/g/n/ac RTL8822CE Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.02 |
| Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application kJLREbgL3HhzaLghoBVuYw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States |
Date of Grant: 01/31/2020 Application Dated: 01/22/2020 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94-RTL8822CEDL |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11a/b/g/n/ac RTL8822CE Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.02 |
| Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 01/31/2020 Application Dated: 01/22/2020 |
| HP Inc. |
| 3390 East Harmony Road |
| Fort Collins, CO 80528 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94-RTL8822CEDL |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n/ac RTL8822CE Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.203 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.207 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.217 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.308 |
| Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application KC3saECs2ZVY//E5iimN6g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States |
Date of Grant: 01/31/2020 Application Dated: 01/22/2020 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94-RTL8822CEDL |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n/ac RTL8822CE Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.203 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.207 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.217 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.308 |
| Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 03/03/2020 Application Dated: 03/02/2020 |
| HP Inc. |
| 3390 East Harmony Road |
| Fort Collins, CO 80528 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94-RTL8822CEDL |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g/n/ac RTL8822CE Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.016 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.794 |
| Class II Permissive Change : This change is to incorporate this Module into Portable category Configuration (Brand : HP ; Model number : HSN-I34C) and antenna change as described in the following. PIFA Antenna, Supplier: AWAN, Part number: 6036B0261901 (AUP6Y-100048) (Tx1), 6036B0262201 (AUP6Y-100047) (Tx2). PIFA Antenna, Supplier: HONG-BO, Part number: 6036B0262001 (260-27404) (Tx1), 6036B0262301 (260-27403) (Tx2). PIFA Antenna, Supplier: INPAQ, Part number: 6036B0262101 (WA-P-LB-02-730) (Tx1), 6036B0261801 (WA-P-LB-02-729) (Tx2). Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.59 W/kg and 1.02 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 0AjLxVisS8iF4ZaB3l++kA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States |
Date of Grant: 03/03/2020 Application Dated: 03/02/2020 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94-RTL8822CEDL |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g/n/ac RTL8822CE Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.016 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.794 |
| Class II Permissive Change : This change is to incorporate this Module into Portable category Configuration (Brand : HP ; Model number : HSN-I34C) and antenna change as described in the following. PIFA Antenna, Supplier: AWAN, Part number: 6036B0261901 (AUP6Y-100048) (Tx1), 6036B0262201 (AUP6Y-100047) (Tx2). PIFA Antenna, Supplier: HONG-BO, Part number: 6036B0262001 (260-27404) (Tx1), 6036B0262301 (260-27403) (Tx2). PIFA Antenna, Supplier: INPAQ, Part number: 6036B0262101 (WA-P-LB-02-730) (Tx1), 6036B0261801 (WA-P-LB-02-729) (Tx2). Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.59 W/kg and 1.02 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 03/03/2020 Application Dated: 03/02/2020 |
| HP Inc. |
| 3390 East Harmony Road |
| Fort Collins, CO 80528 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94-RTL8822CEDL |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n/ac RTL8822CE Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.203 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.207 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.217 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.308 |
| Class II Permissive Change : This change is to incorporate this Module into Portable category Configuration (Brand : HP ; Model number : HSN-I34C) and antenna change as described in the following. PIFA Antenna, Supplier: AWAN, Part number: 6036B0261901 (AUP6Y-100048) (Tx1), 6036B0262201 (AUP6Y-100047) (Tx2). PIFA Antenna, Supplier: HONG-BO, Part number: 6036B0262001 (260-27404) (Tx1), 6036B0262301 (260-27403) (Tx2). PIFA Antenna, Supplier: INPAQ, Part number: 6036B0262101 (WA-P-LB-02-730) (Tx1), 6036B0261801 (WA-P-LB-02-729) (Tx2). Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.13 W/kg and 1.25 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application +/11vdlxsrWLQs5nDz+pdg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States |
Date of Grant: 03/03/2020 Application Dated: 03/02/2020 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94-RTL8822CEDL |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n/ac RTL8822CE Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.203 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.207 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.217 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.308 |
| Class II Permissive Change : This change is to incorporate this Module into Portable category Configuration (Brand : HP ; Model number : HSN-I34C) and antenna change as described in the following. PIFA Antenna, Supplier: AWAN, Part number: 6036B0261901 (AUP6Y-100048) (Tx1), 6036B0262201 (AUP6Y-100047) (Tx2). PIFA Antenna, Supplier: HONG-BO, Part number: 6036B0262001 (260-27404) (Tx1), 6036B0262301 (260-27403) (Tx2). PIFA Antenna, Supplier: INPAQ, Part number: 6036B0262101 (WA-P-LB-02-730) (Tx1), 6036B0261801 (WA-P-LB-02-729) (Tx2). Any configuration other than the one described will require a separate approval. End end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.13 W/kg and 1.25 W/kg, respectively. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |