FCC ID B944965AG

Intel Wireless WiFi Link 4965AG

by HP Inc.

Grantee Code: B94   Product Code: 4965AG
Latest application date: 2007-07-03

FCC ID Device Details

FCC IDB944965AG
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeB94
Product Code4965AG
Applicant BusinessHP Inc. 🇺🇸
Related Domains hp.com
Equipment ClassIntel Wireless WiFi Link 4965AG
Test FirmCETECOM Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2007-07-03
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2007-07-03
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2007-05-31
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2007-05-31
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2007-04-12
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2007-04-12
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2007-03-15
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2007-03-15
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2007-03-15
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2007-03-15
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2007-02-14
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2007-02-14
5180-5240 MHzOriginal Equipment2006-12-15
2412-2462 MHzOriginal Equipment2006-12-15

Exhibits

DocumentTypeAvailableFile
Notebook Regulatory GuideUsers Manual2007-07-03PDF 1.9 MB
User ManualUsers Manual2007-07-03PDF 3.5 MB
Users Manual 1Users Manual2007-05-31PDF 3.2 MB
Users Manual 2Users Manual2007-05-31PDF 488.3 KB
Manual 434155Users Manual2007-04-12PDF 281 KB
Manual 435748Users Manual2007-04-12PDF 2.5 MB
Manual 435751Users Manual2007-04-12PDF 526.9 KB
Manual 435813Users Manual2007-04-12PDF 526.1 KB
Manual 435816Users Manual2007-04-12PDF 2.6 MB
Regulatory ManualUsers Manual2007-04-12PDF 1.8 MB
Manual 435748Users Manual2007-03-15PDF 2.5 MB
Manual 435816Users Manual2007-03-15PDF 2.6 MB
User ManualUsers Manual2006-12-15PDF 3 MB
Users ManualUsers Manual2006-12-15PDF 3 MB
Internal PhotosInternal Photos2007-07-03PDF 3.4 MB
Internal PhotosInternal Photos2007-02-14PDF 250.1 KB
Internal PhotosInternal Photos2006-12-15PDF 479.5 KB
External PhotosExternal Photos2007-07-03PDF 1.1 MB
External PhotosExternal Photos2007-02-14PDF 189.9 KB
External PhotosExternal Photos2006-12-15PDF 423.9 KB
LabelID Label/Location Info2007-07-03PDF 76.4 KB
Label LocationID Label/Location Info2007-02-14PDF 596.5 KB
Label and LocationID Label/Location Info2007-02-14PDF 596.5 KB
Label and LocationID Label/Location Info2006-12-15PDF 842.7 KB
Antenna InformationOperational Description2007-07-03PDF 182.3 KB
Test Setup PhotosTest Setup Photos2007-07-03PDF 1 MB
Test Setup PhotosTest Setup Photos2007-02-14PDF 439.5 KB
Test Setup PhotosTest Setup Photos2006-12-15PDF 787.8 KB
Test Report 80211aTest Report2007-07-03PDF 431.9 KB
Test Report 80211aTest Report2007-07-03PDF 591.2 KB
Test Report 80211bgTest Report2007-07-03PDF 580.6 KB
Test ReportTest Report2007-02-14PDF 348.9 KB
Test ReportTest Report2007-02-14PDF 602.2 KB
Test ReportTest Report2006-12-15PDF 1.5 MB
Test ReportTest Report2006-12-15PDF 1.2 MB
Test ReportTest Report2006-12-15PDF 1 MB
Test Report DFSTest Report2006-12-15PDF 517.8 KB
Attestation StatementAttestation Statements2007-05-31PDF 44.7 KB
Attestation StatementAttestation Statements2007-02-14PDF 83.5 KB
Channel AttestationAttestation Statements2007-02-14PDF 166.3 KB
Channel AttestationCover Letter(s)2006-12-15PDF 166.3 KB
Channel Attestation Metadata onlyAttestation Statements2006-12-15PDF 937.6 KB
Request for Class II Permissive ChangeCover Letter(s)2007-07-03PDF 44.4 KB
Authorization LetterCover Letter(s)2007-05-31PDF 46.2 KB
Bios Lock LetterCover Letter(s)2007-05-31PDF 96 KB
ConfidentialityCover Letter(s)2007-05-31PDF 44.5 KB
Cover LetterCover Letter(s)2007-05-31PDF 67.8 KB
Authorization LetterCover Letter(s)2007-04-12PDF 48.2 KB
Class II Permissive Change LetterCover Letter(s)2007-04-12PDF 44 KB
Class II Permissive Change LetterCover Letter(s)2007-03-15PDF 44.2 KB
Class II Permissive Change LetterCover Letter(s)2007-03-15PDF 43.7 KB
MPECover Letter(s)2007-03-15PDF 110.7 KB
MPECover Letter(s)2007-03-15PDF 110.4 KB
Cover LetterCover Letter(s)2007-02-14PDF 92.8 KB
ConfidentialityCover Letter(s)2006-12-15PDF 145.6 KB
Cover LetterCover Letter(s)2006-12-15PDF 360.6 KB
Modular Approval LetterCover Letter(s)2006-12-15PDF 243.9 KB
SAR Appendix PhotosRF Exposure Info2007-07-03PDF 279.8 KB
SAR Appendix PlotsRF Exposure Info2007-07-03PDF 151.5 KB
SAR Calibration Data Part 1RF Exposure Info2007-07-03PDF 237.2 KB
SAR Calibration Data Part 2RF Exposure Info2007-07-03PDF 1.3 MB
SAR Calibration Data Part 3RF Exposure Info2007-07-03PDF 379.6 KB
SAR ReportRF Exposure Info2007-07-03PDF 360.9 KB
SAR Validation Check ResultsRF Exposure Info2007-07-03PDF 70.8 KB
Antennan 226Parts List/Tune Up Info2007-04-12PDF 336.7 KB
Antennan 229Parts List/Tune Up Info2007-04-12PDF 2.6 MB
MPERF Exposure Info2007-04-12PDF 116.5 KB
Antennan DParts List/Tune Up Info2007-03-15PDF 2.6 MB
Antennan TParts List/Tune Up Info2007-03-15PDF 399.4 KB
Antennan TParts List/Tune Up Info2007-03-15PDF 399.4 KB
RF Exposure Antenna InfoRF Exposure Info2007-02-14PDF 231.6 KB
RF Exposure MPERF Exposure Info2007-02-14PDF 188.3 KB
RF Exposure Antenna InfoRF Exposure Info2006-12-15PDF 200.9 KB
RF Exposure MPERF Exposure Info2006-12-15PDF 424.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 11.7 KB
Schematics Metadata onlySchematicsPDF 554.3 KB
Description Metadata onlyOperational DescriptionPDF 200.1 KB

Application Information

Application IDxEVksbqQs+mmpHbH1ICnsA==
Final Action Date2007-07-03
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0020305058
Model4965AG
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionIntel Wireless WiFi Link 4965AG
Responsible PartyDavid P. Adams, Strategist, dadams@hp.com , 650-236-8524
Test FirmFranz Engert, CETECOM Inc., franz.engert@cetecom.com , 408-586-6249
TCB Emailjoachim.seewald@ict.cetecom.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change to allow portable configuration in specific host as described in this filling. Power Output listed is Conducted. Modular approval. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150 – 5250 MHz frequency range. For operation in mobile RF exposure conditions, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as shown in applications under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lap held and other positions as shown in this filing. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.253 W/kg; 5.2 GHz-band 0.407 W/kg; 5.8 GHz-band 0.856 W/kg. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.

Applications

Application IDDatePurpose
xEVksbqQs+mmpHbH1ICnsA==2007-07-03Class II permissive change or modification of presently authorized equipment
9BjHVAvGiRdXUd5HAZBjmA==2007-07-03Class II permissive change or modification of presently authorized equipment
q3Vq1+QugRUPVZ6bo8/KbA==2007-05-31Class II permissive change or modification of presently authorized equipment
F39fs/l918iqxZSDPWjsOw==2007-05-31Class II permissive change or modification of presently authorized equipment
m+LU8rY5B+S9IVGKSchj5Q==2007-04-12Class II permissive change or modification of presently authorized equipment
cbXFonsu/gG7jEJJJarqnQ==2007-04-12Class II permissive change or modification of presently authorized equipment
uxjN8KuvktG+4dbg4DsjnQ==2007-03-15Class II permissive change or modification of presently authorized equipment
kOWNx/HWxHc5w/5Q5pT00g==2007-03-15Class II permissive change or modification of presently authorized equipment
aIM4Zd2horRFfbwkqwkY0A==2007-03-15Class II permissive change or modification of presently authorized equipment
ZQUdtKm154xCud/E6VLblw==2007-03-15Class II permissive change or modification of presently authorized equipment
l4ixGzr4CqFd83cY1BPMdA==2007-02-14Class II permissive change or modification of presently authorized equipment
hhXXxerFT9SiR/2iS1Q+dg==2007-02-14Class II permissive change or modification of presently authorized equipment
ttF2iTu48RQ1O2vQi98zQA==2006-12-15Original Equipment
cDPDYnonj2TacIiaNeMQpg==2006-12-15Original Equipment
3QwB4fnQCv1fwyGdtQCF5w==2006-12-15Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.24215CCC
5180-5240 MHz0.04915ECC
5260-5320 MHz0.08715ECC
5745-5825 MHz0.10715CCC

Grants

TCB Grant - Application ZQUdtKm154xCud/E6VLblw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 03/15/2007

Application Dated: 03/15/2007
Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless WiFi Link 4965AG
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.049  
CC 15E 5260.0  -  5320.0 0.087  

Class II permissve change to be co-located with specific WWAN module as documented in the filing. Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ZQUdtKm154xCud/E6VLblw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
United States
  Date of Grant: 03/15/2007

Application Dated: 03/15/2007
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless WiFi Link 4965AG
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.049  
CC 15E 5260.0  -  5320.0 0.087  

Class II permissve change to be co-located with specific WWAN module as documented in the filing. Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA880818

TCB Grant - Application xEVksbqQs+mmpHbH1ICnsA==

TYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dtd">
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany
Date of Grant: 07/03/2007

Application Dated: 07/03/2007
HP Inc.
1501 Page Mill Road
Palo Alto, CA 94304
 
Attention: David Adams , Strategist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless WiFi Link 4965AG
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.049  
CC 15E 5260.0  -  5320.0 0.087  

Class II Permissive Change to allow portable configuration in specific host as described in this filling.

Power Output listed is Conducted. Modular approval. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150 5250 MHz frequency range.

For operation in mobile RF exposure conditions, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as shown in applications under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lap held and other positions as shown in this filing. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.253 W/kg; 5.2 GHz-band 0.407 W/kg; 5.8 GHz-band 0.856 W/kg.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application xEVksbqQs+mmpHbH1ICnsA==

TYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dtd">
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
1501 Page Mill Road
Palo Alto, CA 94304
United States
  Date of Grant: 07/03/2007

Application Dated: 07/03/2007
 
Attention: David Adams , Strategist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless WiFi Link 4965AG
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.049  
CC 15E 5260.0  -  5320.0 0.087  

Class II Permissive Change to allow portable configuration in specific host as described in this filling.

Power Output listed is Conducted. Modular approval. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150 5250 MHz frequency range.

For operation in mobile RF exposure conditions, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as shown in applications under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lap held and other positions as shown in this filing. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.253 W/kg; 5.2 GHz-band 0.407 W/kg; 5.8 GHz-band 0.856 W/kg.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA140341

TCB Grant - Application uxjN8KuvktG+4dbg4DsjnQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 03/15/2007

Application Dated: 03/15/2007
Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Digital Transmission System
Notes: Intel Wireless WiFi Link 4965AG
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.242  
CC 15C 5745.0  -  5825.0 0.107  

Class II permissve change to be co-located with specific WWAN module as documented in the filing. Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application uxjN8KuvktG+4dbg4DsjnQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
United States
  Date of Grant: 03/15/2007

Application Dated: 03/15/2007
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Digital Transmission System
Notes: Intel Wireless WiFi Link 4965AG
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.242  
CC 15C 5745.0  -  5825.0 0.107  

Class II permissve change to be co-located with specific WWAN module as documented in the filing. Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA526856

TCB Grant - Application ttF2iTu48RQ1O2vQi98zQA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 12/15/2006

Application Dated: 12/15/2006
HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  HP Inc.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Class B Computing Device Peripheral
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 


EAS Grant - Application ttF2iTu48RQ1O2vQi98zQA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 12/15/2006

Application Dated: 12/15/2006
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  HP Inc.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Class B Computing Device Peripheral
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 



TCB Grant - Application q3Vq1+QugRUPVZ6bo8/KbA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/31/2007

Application Dated: 05/10/2007
Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Digital Transmission System
Notes: Intel Wireless WiFi Link 4965AGN
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.242  
CC 15C 5745.0  -  5825.0 0.107  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile only configurations. The final host device must utilize the BIOS Locking feature as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as shown in applications under this FCC ID. Class II Permissive Changes have evaluated co-location with specific WWAN modules as documented in applications under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application q3Vq1+QugRUPVZ6bo8/KbA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
United States
  Date of Grant: 05/31/2007

Application Dated: 05/10/2007
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Digital Transmission System
Notes: Intel Wireless WiFi Link 4965AGN
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.242  
CC 15C 5745.0  -  5825.0 0.107  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile only configurations. The final host device must utilize the BIOS Locking feature as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as shown in applications under this FCC ID. Class II Permissive Changes have evaluated co-location with specific WWAN modules as documented in applications under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA390098

TCB Grant - Application m+LU8rY5B+S9IVGKSchj5Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 04/12/2007

Application Dated: 04/12/2007
Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Digital Transmission System
Notes: Intel Wireless WiFi Link 4965AG
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.242  
CC 15C 5745.0  -  5825.0 0.107  

Class II permissive change to be co-located with specific WWAN module as documented in the filing. Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application m+LU8rY5B+S9IVGKSchj5Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
United States
  Date of Grant: 04/12/2007

Application Dated: 04/12/2007
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Digital Transmission System
Notes: Intel Wireless WiFi Link 4965AG
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.242  
CC 15C 5745.0  -  5825.0 0.107  

Class II permissive change to be co-located with specific WWAN module as documented in the filing. Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA378073

TCB Grant - Application l4ixGzr4CqFd83cY1BPMdA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 02/14/2007

Application Dated: 02/13/2007
Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Digital Transmission System
Notes: Intel Wireless WiFi Link 4965AGN
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.242  
CC 15C 5745.0  -  5825.0 0.107  

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application l4ixGzr4CqFd83cY1BPMdA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
United States
  Date of Grant: 02/14/2007

Application Dated: 02/13/2007
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Digital Transmission System
Notes: Intel Wireless WiFi Link 4965AGN
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.242  
CC 15C 5745.0  -  5825.0 0.107  

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA763749

TCB Grant - Application kOWNx/HWxHc5w/5Q5pT00g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 03/15/2007

Application Dated: 03/15/2007
Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Digital Transmission System
Notes: Intel Wireless WiFi Link 4965AG
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.242  
CC 15C 5745.0  -  5825.0 0.107  

Class II permissve change to be co-located with specific WWAN module as documented in the filing. Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application kOWNx/HWxHc5w/5Q5pT00g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
United States
  Date of Grant: 03/15/2007

Application Dated: 03/15/2007
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Digital Transmission System
Notes: Intel Wireless WiFi Link 4965AG
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.242  
CC 15C 5745.0  -  5825.0 0.107  

Class II permissve change to be co-located with specific WWAN module as documented in the filing. Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA592201

TCB Grant - Application hhXXxerFT9SiR/2iS1Q+dg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 02/14/2007

Application Dated: 02/13/2007
Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless WiFi Link 4965AGN
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.049  
CC 15E 5260.0  -  5320.0 0.087  

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application hhXXxerFT9SiR/2iS1Q+dg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
United States
  Date of Grant: 02/14/2007

Application Dated: 02/13/2007
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless WiFi Link 4965AGN
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.049  
CC 15E 5260.0  -  5320.0 0.087  

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA164201

TCB Grant - Application F39fs/l918iqxZSDPWjsOw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/31/2007

Application Dated: 05/10/2007
Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless WiFi Link 4965AGN
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.049  
CC 15E 5260.0  -  5320.0 0.087  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile only configurations. The final host device must utilize the BIOS Locking feature as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150 MHz to 5250 MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as shown in applications under this FCC ID. Class II Permissive Changes have evaluated co-location with specific WWAN modules as documented in applications under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application F39fs/l918iqxZSDPWjsOw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
United States
  Date of Grant: 05/31/2007

Application Dated: 05/10/2007
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless WiFi Link 4965AGN
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.049  
CC 15E 5260.0  -  5320.0 0.087  

Power Output listed is Aggregate Conducted. Modular approval. This module is approved for use in mobile only configurations. The final host device must utilize the BIOS Locking feature as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150 MHz to 5250 MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as shown in applications under this FCC ID. Class II Permissive Changes have evaluated co-location with specific WWAN modules as documented in applications under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is a client only device containing a 2x3 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA628076

TCB Grant - Application cDPDYnonj2TacIiaNeMQpg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 12/15/2006

Application Dated: 12/14/2006
HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless WiFi Link 4965AG
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.049  
CC 15E 5260.0  -  5320.0 0.087  

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application cDPDYnonj2TacIiaNeMQpg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 12/15/2006

Application Dated: 12/14/2006
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless WiFi Link 4965AG
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.049  
CC 15E 5260.0  -  5320.0 0.087  

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application cbXFonsu/gG7jEJJJarqnQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 04/12/2007

Application Dated: 04/12/2007
Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless WiFi Link 4965AG
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.049  
CC 15E 5260.0  -  5320.0 0.087  

Class II permissive change to be co-located with specific WWAN module as documented in the filing. Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application cbXFonsu/gG7jEJJJarqnQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
United States
  Date of Grant: 04/12/2007

Application Dated: 04/12/2007
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless WiFi Link 4965AG
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.049  
CC 15E 5260.0  -  5320.0 0.087  

Class II permissive change to be co-located with specific WWAN module as documented in the filing. Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA539557

TCB Grant - Application aIM4Zd2horRFfbwkqwkY0A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 03/15/2007

Application Dated: 03/15/2007
Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless WiFi Link 4965AG
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.049  
CC 15E 5260.0  -  5320.0 0.087  

Class II permissve change to be co-located with specific WWAN module as documented in the filing. Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application aIM4Zd2horRFfbwkqwkY0A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
United States
  Date of Grant: 03/15/2007

Application Dated: 03/15/2007
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel Wireless WiFi Link 4965AG
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.049  
CC 15E 5260.0  -  5320.0 0.087  

Class II permissve change to be co-located with specific WWAN module as documented in the filing. Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA663857

TCB Grant - Application 9BjHVAvGiRdXUd5HAZBjmA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany
Date of Grant: 07/03/2007

Application Dated: 07/03/2007
HP Inc.
1501 Page Mill Road
Palo Alto, CA 94304
 
Attention: David Adams , Strategist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: Intel Wireless WiFi Link 4965AG
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.242  
CC 15C 5745.0  -  5825.0 0.107  

Class II Permissive Change to allow portable configuration in specific host as described in this filling.

Power Output listed is Conducted. Modular approval. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

For operation in mobile RF exposure conditions, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as shown in applications under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lap held and other positions as shown in this filing. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.253 W/kg; 5.2 GHz-band 0.407 W/kg; 5.8 GHz-band 0.856 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 9BjHVAvGiRdXUd5HAZBjmA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
1501 Page Mill Road
Palo Alto, CA 94304
United States
  Date of Grant: 07/03/2007

Application Dated: 07/03/2007
 
Attention: David Adams , Strategist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: Intel Wireless WiFi Link 4965AG
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.242  
CC 15C 5745.0  -  5825.0 0.107  

Class II Permissive Change to allow portable configuration in specific host as described in this filling.

Power Output listed is Conducted. Modular approval. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

For operation in mobile RF exposure conditions, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as shown in applications under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

For operation in portable RF exposure conditions, SAR compliance was evaluated in specific notebook computer(s) with specific multi-transmitter configuration for lap held and other positions as shown in this filing. The highest reported body SAR values for filings under this FCC ID are: 2.4 GHz-band 0.253 W/kg; 5.2 GHz-band 0.407 W/kg; 5.8 GHz-band 0.856 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA822971

TCB Grant - Application 3QwB4fnQCv1fwyGdtQCF5w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 12/15/2006

Application Dated: 12/14/2006
HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: Intel Wireless WiFi Link 4965AG
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.242  
CC 15C 5745.0  -  5825.0 0.107  

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 3QwB4fnQCv1fwyGdtQCF5w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 12/15/2006

Application Dated: 12/14/2006
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B944965AG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: Intel Wireless WiFi Link 4965AG
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.242  
CC 15C 5745.0  -  5825.0 0.107  

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: