FCC ID B949260NGWM

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

Antenna 1: Brand : AWAN, Type : PIFA, Model : 6036B0261901(APU6Y-10048) (Tx1), Gain values : -1.87 dBi@2.4 GHz, 0.66 dBi@5GHz for NB mode, -2.93 dBi@2.4 GHz, 1.30 dBi@5GHz for Tablet mode, Model : 6036B0262201(APU6Y-10047) (Tx2), Gain values : 0.36 dBi@2.4 GHz, 1.18 dBi@5GHz for NB mode, -2.96 dBi@2.4 GHz, -0.11 dBi@5GHz for Tablet mode.

Antenna 2: Brand : HONG-BO, Type : PIFA, Model : 6036B0262001(260-27404) (Tx1), Gain values : 1.56 dBi@2.4 GHz, 0.07 dBi@5GHz for NB mode, -0.98 dBi@2.4 GHz, -1.09 dBi@5GHz for Tablet mode, Model : 6036B0262301(260-27403) (Tx2), Gain values : 0.79 dBi@2.4 GHz, 2.60 dBi@5GHz for NB mode, -0.59 dBi@2.4 GHz, 2.37 dBi@5GHz for Tablet mode.

Antenna 3: Brand : INPAQ, Type : PIFA, Model : 6036B0262101(WA-P-LB-02-730) (Tx1), Gain values : 1.72 dBi@2.4 GHz, 2.61 dBi@5GHz for NB mode, -1.18 dBi@2.4 GHz, -1.23 dBi@5GHz for Tablet mode, Model : 6036B0261801(WA-P-LB-02-729) (Tx2), Gain values : 2.21 dBi@2.4 GHz, 1.24 dBi@5GHz for NB mode, -0.82 dBi@2.4 GHz, 2.38 dBi@5GHz for Tablet mode.

The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance.

The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are <0.1 W/kg, and 0.75 W/kg, respectively.

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

Antenna 1: Brand : AWAN, Type : PIFA, Model : 6036B0261901(APU6Y-10048) (Tx1), Gain values : -1.87 dBi@2.4 GHz, 0.66 dBi@5GHz for NB mode, -2.93 dBi@2.4 GHz, 1.30 dBi@5GHz for Tablet mode, Model : 6036B0262201(APU6Y-10047) (Tx2), Gain values : 0.36 dBi@2.4 GHz, 1.18 dBi@5GHz for NB mode, -2.96 dBi@2.4 GHz, -0.11 dBi@5GHz for Tablet mode.

Antenna 2: Brand : HONG-BO, Type : PIFA, Model : 6036B0262001(260-27404) (Tx1), Gain values : 1.56 dBi@2.4 GHz, 0.07 dBi@5GHz for NB mode, -0.98 dBi@2.4 GHz, -1.09 dBi@5GHz for Tablet mode, Model : 6036B0262301(260-27403) (Tx2), Gain values : 0.79 dBi@2.4 GHz, 2.60 dBi@5GHz for NB mode, -0.59 dBi@2.4 GHz, 2.37 dBi@5GHz for Tablet mode.

Antenna 3: Brand : INPAQ, Type : PIFA, Model : 6036B0262101(WA-P-LB-02-730) (Tx1), Gain values : 1.72 dBi@2.4 GHz, 2.61 dBi@5GHz for NB mode, -1.18 dBi@2.4 GHz, -1.23 dBi@5GHz for Tablet mode, Model : 6036B0261801(WA-P-LB-02-729) (Tx2), Gain values : 2.21 dBi@2.4 GHz, 1.24 dBi@5GHz for NB mode, -0.82 dBi@2.4 GHz, 2.38 dBi@5GHz for Tablet mode.

The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance.

The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are <0.1 W/kg, and 0.75 W/kg, respectively.

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

Antenna 1: Brand : AWAN, Type : PIFA, Model : 6036B0261901(APU6Y-10048) (Tx1), Gain values : -1.87 dBi@2.4 GHz, 0.66 dBi@5GHz for NB mode, -2.93 dBi@2.4 GHz, 1.30 dBi@5GHz for Tablet mode, Model : 6036B0262201(APU6Y-10047) (Tx2), Gain values : 0.36 dBi@2.4 GHz, 1.18 dBi@5GHz for NB mode, -2.96 dBi@2.4 GHz, -0.11 dBi@5GHz for Tablet mode.

Antenna 2: Brand : HONG-BO, Type : PIFA, Model : 6036B0262001(260-27404) (Tx1), Gain values : 1.56 dBi@2.4 GHz, 0.07 dBi@5GHz for NB mode, -0.98 dBi@2.4 GHz, -1.09 dBi@5GHz for Tablet mode, Model : 6036B0262301(260-27403) (Tx2), Gain values : 0.79 dBi@2.4 GHz, 2.60 dBi@5GHz for NB mode, -0.59 dBi@2.4 GHz, 2.37 dBi@5GHz for Tablet mode.

Antenna 3: Brand : INPAQ, Type : PIFA, Model : 6036B0262101(WA-P-LB-02-730) (Tx1), Gain values : 1.72 dBi@2.4 GHz, 2.61 dBi@5GHz for NB mode, -1.18 dBi@2.4 GHz, -1.23 dBi@5GHz for Tablet mode, Model : 6036B0261801(WA-P-LB-02-729) (Tx2), Gain values : 2.21 dBi@2.4 GHz, 1.24 dBi@5GHz for NB mode, -0.82 dBi@2.4 GHz, 2.38 dBi@5GHz for Tablet mode.

The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance.

The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are 0.56 W/kg, and 0.97 W/kg, respectively.

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

Antenna 1: Brand : AWAN, Type : PIFA, Model : 6036B0261901(APU6Y-10048) (Tx1), Gain values : -1.87 dBi@2.4 GHz, 0.66 dBi@5GHz for NB mode, -2.93 dBi@2.4 GHz, 1.30 dBi@5GHz for Tablet mode, Model : 6036B0262201(APU6Y-10047) (Tx2), Gain values : 0.36 dBi@2.4 GHz, 1.18 dBi@5GHz for NB mode, -2.96 dBi@2.4 GHz, -0.11 dBi@5GHz for Tablet mode.

Antenna 2: Brand : HONG-BO, Type : PIFA, Model : 6036B0262001(260-27404) (Tx1), Gain values : 1.56 dBi@2.4 GHz, 0.07 dBi@5GHz for NB mode, -0.98 dBi@2.4 GHz, -1.09 dBi@5GHz for Tablet mode, Model : 6036B0262301(260-27403) (Tx2), Gain values : 0.79 dBi@2.4 GHz, 2.60 dBi@5GHz for NB mode, -0.59 dBi@2.4 GHz, 2.37 dBi@5GHz for Tablet mode.

Antenna 3: Brand : INPAQ, Type : PIFA, Model : 6036B0262101(WA-P-LB-02-730) (Tx1), Gain values : 1.72 dBi@2.4 GHz, 2.61 dBi@5GHz for NB mode, -1.18 dBi@2.4 GHz, -1.23 dBi@5GHz for Tablet mode, Model : 6036B0261801(WA-P-LB-02-729) (Tx2), Gain values : 2.21 dBi@2.4 GHz, 1.24 dBi@5GHz for NB mode, -0.82 dBi@2.4 GHz, 2.38 dBi@5GHz for Tablet mode.

The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance.

The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are 0.56 W/kg, and 0.97 W/kg, respectively.

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

Antenna 1: Brand : AWAN, Type : PIFA, Model : 6036B0261901(APU6Y-10048) (Tx1), Gain values : -1.87 dBi@2.4 GHz, 0.66 dBi@5GHz for NB mode, -2.93 dBi@2.4 GHz, 1.30 dBi@5GHz for Tablet mode, Model : 6036B0262201(APU6Y-10047) (Tx2), Gain values : 0.36 dBi@2.4 GHz, 1.18 dBi@5GHz for NB mode, -2.96 dBi@2.4 GHz, -0.11 dBi@5GHz for Tablet mode.

Antenna 2: Brand : HONG-BO, Type : PIFA, Model : 6036B0262001(260-27404) (Tx1), Gain values : 1.56 dBi@2.4 GHz, 0.07 dBi@5GHz for NB mode, -0.98 dBi@2.4 GHz, -1.09 dBi@5GHz for Tablet mode, Model : 6036B0262301(260-27403) (Tx2), Gain values : 0.79 dBi@2.4 GHz, 2.60 dBi@5GHz for NB mode, -0.59 dBi@2.4 GHz, 2.37 dBi@5GHz for Tablet mode.

Antenna 3: Brand : INPAQ, Type : PIFA, Model : 6036B0262101(WA-P-LB-02-730) (Tx1), Gain values : 1.72 dBi@2.4 GHz, 2.61 dBi@5GHz for NB mode, -1.18 dBi@2.4 GHz, -1.23 dBi@5GHz for Tablet mode, Model : 6036B0261801(WA-P-LB-02-729) (Tx2), Gain values : 2.21 dBi@2.4 GHz, 1.24 dBi@5GHz for NB mode, -0.82 dBi@2.4 GHz, 2.38 dBi@5GHz for Tablet mode.

The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance.

The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are 0.86 W/kg, and 1.52 W/kg, respectively.

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

Antenna 1: Brand : AWAN, Type : PIFA, Model : 6036B0261901(APU6Y-10048) (Tx1), Gain values : -1.87 dBi@2.4 GHz, 0.66 dBi@5GHz for NB mode, -2.93 dBi@2.4 GHz, 1.30 dBi@5GHz for Tablet mode, Model : 6036B0262201(APU6Y-10047) (Tx2), Gain values : 0.36 dBi@2.4 GHz, 1.18 dBi@5GHz for NB mode, -2.96 dBi@2.4 GHz, -0.11 dBi@5GHz for Tablet mode.

Antenna 2: Brand : HONG-BO, Type : PIFA, Model : 6036B0262001(260-27404) (Tx1), Gain values : 1.56 dBi@2.4 GHz, 0.07 dBi@5GHz for NB mode, -0.98 dBi@2.4 GHz, -1.09 dBi@5GHz for Tablet mode, Model : 6036B0262301(260-27403) (Tx2), Gain values : 0.79 dBi@2.4 GHz, 2.60 dBi@5GHz for NB mode, -0.59 dBi@2.4 GHz, 2.37 dBi@5GHz for Tablet mode.

Antenna 3: Brand : INPAQ, Type : PIFA, Model : 6036B0262101(WA-P-LB-02-730) (Tx1), Gain values : 1.72 dBi@2.4 GHz, 2.61 dBi@5GHz for NB mode, -1.18 dBi@2.4 GHz, -1.23 dBi@5GHz for Tablet mode, Model : 6036B0261801(WA-P-LB-02-729) (Tx2), Gain values : 2.21 dBi@2.4 GHz, 1.24 dBi@5GHz for NB mode, -0.82 dBi@2.4 GHz, 2.38 dBi@5GHz for Tablet mode.

The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance.

The highest reported SAR values for body-worn accessory, and simultaneous transmission use conditions are 0.86 W/kg, and 1.52 W/kg, respectively.

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.