FCC ID B94BCM94311MCAG

802.11ag Wireless LAN PCI-E Mini Card

by HP Inc.

Grantee Code: B94   Product Code: BCM94311MCAG
Latest application date: 2006-09-29

FCC ID Device Details

FCC IDB94BCM94311MCAG
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeB94
Product CodeBCM94311MCAG
Applicant BusinessHP Inc. 🇺🇸
Related Domains hp.com
Equipment Class802.11ag Wireless LAN PCI-E Mini Card
Test FirmCompliance Certification Services

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5320 MHzClass II permissive change or modification of presently authorized equipment2006-09-29
2412-2472 MHzClass II permissive change or modification of presently authorized equipment2006-09-29
5180-5320 MHzClass II permissive change or modification of presently authorized equipment2006-04-25
2412-2472 MHzClass II permissive change or modification of presently authorized equipment2006-04-25
5180-5320 MHzChange in identification of presently authorized equipment. Original FCC ID: QDS-BRCM1019 Grant Date: 08/03/20052006-04-06
2412-2472 MHzChange in identification of presently authorized equipment. Original FCC ID: QDS-BRCM1019 Grant Date: 08/03/20052006-04-06

Exhibits

DocumentTypeAvailableFile
Notebook User ManualUsers Manual2006-09-29PDF 3.4 MB
Regulatory Info SectionUsers Manual2006-09-29PDF 758.2 KB
Regulatory Info sectionUsers Manual2006-09-29PDF 758.2 KB
HP Compaq Notebook ManualUsers Manual2006-04-25PDF 3.4 MB
HP ManualUsers Manual2006-04-25PDF 544.1 KB
Notebook TourUsers Manual2006-04-25PDF 793.5 KB
Regulatory noticesUsers Manual2006-04-25PDF 758.2 KB
External PhotosExternal Photos2006-04-06PDF 767.9 KB
ID LabelID Label/Location Info2006-04-06PDF 423.5 KB
MPE EstimateTest Report2006-09-29PDF 110.7 KB
Agency Authorization LetterCover Letter(s)2006-09-29PDF 48.2 KB
Class II permissive change letterCover Letter(s)2006-09-29PDF 40.9 KB
Authorization LetterCover Letter(s)2006-04-25PDF 48.2 KB
Class II Permissive Change LetterCover Letter(s)2006-04-25PDF 43.8 KB
Broadcom Authorization LetterCover Letter(s)2006-04-06PDF 68.4 KB
HP Application LetterCover Letter(s)2006-04-06PDF 45.7 KB
WLAN Antenna SpecificationParts List/Tune Up Info2006-09-29PDF 290 KB
WWAN Antenna SpecificationParts List/Tune Up Info2006-09-29PDF 404.8 KB
WWAN antenna specificationParts List/Tune Up Info2006-09-29PDF 404.8 KB
Antennan WLANParts List/Tune Up Info2006-04-25PDF 290 KB
Antennan WWANParts List/Tune Up Info2006-04-25PDF 404.8 KB
MPERF Exposure Info2006-04-25PDF 123.7 KB

Application Information

Application IDwY2kabP7y/MoP+Px/YqDQQ==
Final Action Date2006-09-29
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0008035131
ModelBCM94311MCAG
Frequency Range5180-5320 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Description802.11ag Wireless LAN PCI-E Mini Card
Responsible PartyRichard P Tarsio, US Canada Technical Regulations, richard.tarsio@hp.com , 970-898-8713
AgentMichael Michael Michael, Compliance Certification Services, michael.heckrotte@ccsemc.com , 408-463-0885
Test FirmBarbara Judge, Compliance Certification Services, bjudge@ccsemc.com , 510-771-1104
TCB Emailmike.kuo@ccsemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change to be co-located with WWAN Module/N7NMC8775-H as mobile device per section 2.1091 of FCC rules. Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as documented in this filing. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
wY2kabP7y/MoP+Px/YqDQQ==2006-09-29Class II permissive change or modification of presently authorized equipment
OGkBhTpvK20nxKgKGobb7A==2006-09-29Class II permissive change or modification of presently authorized equipment
W24pKhp1sqQ1aSboaFbVjw==2006-04-25Class II permissive change or modification of presently authorized equipment
1SaV8kRK26JE1W6OHjPq0g==2006-04-25Class II permissive change or modification of presently authorized equipment
l3rU6o1GENaTOPLhN9N/6w==2006-04-06Change in identification of presently authorized equipment. Original FCC ID: QDS-BRCM1019 Grant Date: 08/03/2005
IT8K8aveJvAW6prwdqsMsw==2006-04-06Change in identification of presently authorized equipment. Original FCC ID: QDS-BRCM1019 Grant Date: 08/03/2005

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2472 MHz0.432515CCC
5180-5320 MHz0.044800015ECC
5745-5825 MHz0.232815CCC

Grants

TCB Grant - Application wY2kabP7y/MoP+Px/YqDQQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 09/29/2006

Application Dated: 09/29/2006
HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94BCM94311MCAG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11ag Wireless LAN PCI-E Mini Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5320.0 0.0448  

Class II Permissive Change to be co-located with WWAN Module/N7NMC8775-H as mobile device per section 2.1091 of FCC rules. Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as documented in this filing. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application wY2kabP7y/MoP+Px/YqDQQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 09/29/2006

Application Dated: 09/29/2006
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94BCM94311MCAG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11ag Wireless LAN PCI-E Mini Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5320.0 0.0448  

Class II Permissive Change to be co-located with WWAN Module/N7NMC8775-H as mobile device per section 2.1091 of FCC rules. Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as documented in this filing. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application W24pKhp1sqQ1aSboaFbVjw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 04/25/2006

Application Dated: 04/25/2006
HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94BCM94311MCAG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11ag Wireless LAN PCI-E Mini Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5320.0 0.0448  

Class II Permissive Change. Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. This device must be marketed for indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as documented in this filing. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application W24pKhp1sqQ1aSboaFbVjw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 04/25/2006

Application Dated: 04/25/2006
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94BCM94311MCAG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11ag Wireless LAN PCI-E Mini Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5320.0 0.0448  

Class II Permissive Change. Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. This device must be marketed for indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as documented in this filing. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application OGkBhTpvK20nxKgKGobb7A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 09/29/2006

Application Dated: 09/29/2006
HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94BCM94311MCAG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: 802.11ag Wireless LAN PCI-E Mini Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2472.0 0.4325  
CC 15C 5745.0  -  5825.0 0.2328  

Class II Permissive Change to be co-located with WWAN Module/N7NMC8775-H as mobile device per section 2.1091 of FCC rules. Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as documented in this filing. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application OGkBhTpvK20nxKgKGobb7A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 09/29/2006

Application Dated: 09/29/2006
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94BCM94311MCAG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: 802.11ag Wireless LAN PCI-E Mini Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2472.0 0.4325  
CC 15C 5745.0  -  5825.0 0.2328  

Class II Permissive Change to be co-located with WWAN Module/N7NMC8775-H as mobile device per section 2.1091 of FCC rules. Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as documented in this filing. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application l3rU6o1GENaTOPLhN9N/6w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 04/06/2006

Application Dated: 04/06/2006
HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94BCM94311MCAG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11ag Wireless LAN PCI-E Mini Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5320.0 0.0448  

Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. This device must be marketed for indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application l3rU6o1GENaTOPLhN9N/6w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 04/06/2006

Application Dated: 04/06/2006
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94BCM94311MCAG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11ag Wireless LAN PCI-E Mini Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5320.0 0.0448  

Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. This device must be marketed for indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application IT8K8aveJvAW6prwdqsMsw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 04/06/2006

Application Dated: 04/06/2006
HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94BCM94311MCAG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: 802.11ag Wireless LAN PCI-E Mini Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2472.0 0.4325  
CC 15C 5745.0  -  5825.0 0.2328  

Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application IT8K8aveJvAW6prwdqsMsw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 04/06/2006

Application Dated: 04/06/2006
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94BCM94311MCAG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: 802.11ag Wireless LAN PCI-E Mini Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2472.0 0.4325  
CC 15C 5745.0  -  5825.0 0.2328  

Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 1SaV8kRK26JE1W6OHjPq0g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 04/25/2006

Application Dated: 04/25/2006
HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94BCM94311MCAG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: 802.11ag Wireless LAN PCI-E Mini Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2472.0 0.4325  
CC 15C 5745.0  -  5825.0 0.2328  

Class II Permissive Change. Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as documented in this filing. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 1SaV8kRK26JE1W6OHjPq0g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 04/25/2006

Application Dated: 04/25/2006
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94BCM94311MCAG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: 802.11ag Wireless LAN PCI-E Mini Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2472.0 0.4325  
CC 15C 5745.0  -  5825.0 0.2328  

Class II Permissive Change. Modular approval. Power output listed is conducted. The maximum output power on certain channel(s) adjacent to the band edge must be reduced as specified within this application. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as documented in this filing. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: