FCC ID B94HNAR01
802.11 a/b/g/n WI-FI + BT COMBO ADAPTER
by HP Inc.
Grantee Code: B94 Product Code: HNAR01
Latest application date: 2013-05-29
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2013-05-29 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2013-05-29 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2013-05-29 |
| 2402-2480 MHz | Original Equipment | 2013-05-21 |
| 2402-2480 MHz | Original Equipment | 2013-05-21 |
| 5180-5240 MHz | Original Equipment | 2013-05-21 |
| 2402-2480 MHz | Original Equipment | 2013-05-16 |
| 5180-5240 MHz | Original Equipment | 2013-05-16 |
| 2402-2480 MHz | Original Equipment | 2013-05-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2013-11-20 | PDF 648.1 KB |
| User Manual Quick Start Guide | Users Manual | 2013-11-20 | PDF 942 KB |
| Users Manual Regulatory Guide | Users Manual | 2013-11-20 | PDF 1,023.1 KB |
| User Manual | Users Manual | 2013-11-12 | PDF 2.7 MB |
| Internal Photos | Internal Photos | 2013-11-20 | PDF 422.5 KB |
| Internal Photos | Internal Photos | 2013-11-12 | PDF 675 KB |
| External Photos | External Photos | 2013-11-20 | PDF 1.5 MB |
| External Photos | External Photos | 2013-11-12 | PDF 192.9 KB |
| Label Location | ID Label/Location Info | 2013-05-29 | PDF 96.5 KB |
| Label Sample | ID Label/Location Info | 2013-05-29 | PDF 1.4 MB |
| Label Location | ID Label/Location Info | 2013-05-21 | PDF 87.8 KB |
| Label Sample | ID Label/Location Info | 2013-05-21 | PDF 390.9 KB |
| Test Setup Photos | Test Setup Photos | 2013-11-20 | PDF 136.5 KB |
| Test Setup Photos | Test Setup Photos | 2013-11-12 | PDF 203.5 KB |
| Test Setup Photos DFS | Test Setup Photos | 2013-11-12 | PDF 168.2 KB |
| Test Setup Photos DTS | Test Setup Photos | 2013-11-12 | PDF 203.9 KB |
| Test Setup Photos DTS BT | Test Setup Photos | 2013-11-12 | PDF 246.2 KB |
| Test Setup Photos NII | Test Setup Photos | 2013-11-12 | PDF 220.8 KB |
| Test Report | Test Report | 2013-05-21 | PDF 2 MB |
| Test Report DFS | Test Report | 2013-05-21 | PDF 702.8 KB |
| Test Report DTS | Test Report | 2013-05-21 | PDF 3.9 MB |
| Test Report DTS BT | Test Report | 2013-05-21 | PDF 1.3 MB |
| Test Report NII | Test Report | 2013-05-21 | PDF 3.6 MB |
| DOC Attestation Letter | Cover Letter(s) | 2013-05-21 | PDF 37.9 KB |
| DoC Attestation Letter | Cover Letter(s) | 2013-05-21 | PDF 37.9 KB |
| Class II Change Letter | Cover Letter(s) | 2013-05-29 | PDF 38.9 KB |
| Confidential Letter | Cover Letter(s) | 2013-05-29 | PDF 42.2 KB |
| LOA | Cover Letter(s) | 2013-05-29 | PDF 54.6 KB |
| POA | Cover Letter(s) | 2013-05-29 | PDF 39.9 KB |
| Short Term Confidential Letter | Cover Letter(s) | 2013-05-29 | PDF 43 KB |
| AdHoc Mode Declaration Letter | Cover Letter(s) | 2013-05-21 | PDF 38.6 KB |
| LT Request for Confidentiality | Cover Letter(s) | 2013-05-21 | PDF 42.4 KB |
| Modular Approval Cover Letter | Cover Letter(s) | 2013-05-21 | PDF 47 KB |
| Modular Approval Letter | Cover Letter(s) | 2013-05-21 | PDF 47 KB |
| ST Request for Confidentiality | Cover Letter(s) | 2013-05-21 | PDF 43 KB |
| Confidential Letter | Cover Letter(s) | PDF 42.4 KB | |
| DOC Letter | Cover Letter(s) | PDF 37.9 KB | |
| Dismissal Letter | Cover Letter(s) | PDF 42.1 KB | |
| DoC Letter | Cover Letter(s) | PDF 37.9 KB | |
| Modular Approval Cover Letter | Cover Letter(s) | PDF 51.5 KB | |
| RF Exposure Appendix A | RF Exposure Info | 2013-05-29 | PDF 356.9 KB |
| RF Exposure Appendix B | RF Exposure Info | 2013-05-29 | PDF 1 MB |
| RF Exposure Appendix C | RF Exposure Info | 2013-05-29 | PDF 5.8 MB |
| RF Exposure Rev | RF Exposure Info | 2013-05-29 | PDF 1.6 MB |
| RF Exposure Info | RF Exposure Info | 2013-05-21 | PDF 442.3 KB |
Application Information
| Application ID | mXl+wf/tH+kbEthJ1xoa7A== |
|---|---|
| Final Action Date | 2013-05-29 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0020305058 |
| Model | HNAR01 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 802.11 a/b/g/n WI-FI + BT COMBO ADAPTER |
| Responsible Party | David P. Adams, Strategist, dadams@hp.com  , 650-236-8524 |
| Test Firm | Alex Chen, Sporton International Inc., alex@sporton.com.tw  , 886-3-327-3456 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 11/20/2013 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power listed is maximum conducted output power. Operations in 5.15-5.25GHz band are for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 3.08dBi in 5.2GHz band. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz and 40MHz bandwidth modes. (05/21/2013) Class II Permissive Change: This Class II Permissive Change is to integrate this module into a specific host, HP Model: TPN-Q127. The highest reported SAR value is 1.15W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| mXl+wf/tH+kbEthJ1xoa7A== | 2013-05-29 | Class II permissive change or modification of presently authorized equipment |
| SV/do4T4M8kqtZn50qvOrg== | 2013-05-29 | Class II permissive change or modification of presently authorized equipment |
| GH+W6bzp7t5meGuneykJZQ== | 2013-05-29 | Class II permissive change or modification of presently authorized equipment |
| b8kYs6NhIDM7s/G9d6mwJQ== | 2013-05-21 | Original Equipment |
| DMBXCgw5JTu2V6eZnrJmPQ== | 2013-05-21 | Original Equipment |
| ADhQv2BLAnSoEnRYkS1rQQ== | 2013-05-21 | Original Equipment |
| rsmV6Bnj1QHo21gxuufT6Q== | 2013-05-16 | Original Equipment |
| kmx6ikAAqbh4AMmCvH3NMA== | 2013-05-16 | Original Equipment |
| akhBnkgX1BBmAFPt88Fs2A== | 2013-05-16 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.0023000 | 15C | CC |
| 2402-2480 MHz | 0.007 | 15C | CC |
| 2412-2462 MHz | 0.1702 | 15C | CC |
| 2422-2452 MHz | 0.1069 | 15C | CC |
| 5180-5240 MHz | 0.0245 | 15E | CC, ND |
| 5190-5230 MHz | 0.0126 | 15E | CC, ND |
| 5260-5320 MHz | 0.0246 | 15E | CC, ND |
| 5270-5310 MHz | 0.0113 | 15E | CC, ND |
| 5500-5600 MHz | 0.025 | 15E | CC, ND |
| 5510-5600 MHz | 0.0119 | 15E | CC, ND |
| 5650-5700 MHz | 0.022 | 15E | CC, ND |
| 5650-5670 MHz | 0.01 | 15E | CC, ND |
| 5745-5825 MHz | 0.1524 | 15C | CC |
| 5755-5795 MHz | 0.1135 | 15C | CC |
Grants
TCB Grant - Application SV/do4T4M8kqtZn50qvOrg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 05/29/2013 Application Dated: 05/24/2013 |
| HP Inc. |
| 1501 Page Mill Road |
| Palo Alto, CA 94304 |
| Attention: David Adams , Strategist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94HNAR01 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g/n WI-FI + BT COMBO ADAPTER |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1702 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.1069 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.1524 | ||
| CC | 15C | 5755.0 - 5795.0 | 0.1135 |
| Single Modular Transmitter. Power listed is maximum conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz and 40MHz bandwidth modes. (05/21/2013) Class II Permissive Change: This Class II Permissive Change is to integrate this module into a specific host, HP Model: TPN-Q127 The highest reported SAR value is 1.38W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application SV/do4T4M8kqtZn50qvOrg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 1501 Page Mill Road Palo Alto, CA 94304 United States |
Date of Grant: 05/29/2013 Application Dated: 05/24/2013 |
| Attention: David Adams , Strategist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94HNAR01 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g/n WI-FI + BT COMBO ADAPTER |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1702 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.1069 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.1524 | ||
| CC | 15C | 5755.0 - 5795.0 | 0.1135 |
| Single Modular Transmitter. Power listed is maximum conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz and 40MHz bandwidth modes. (05/21/2013) Class II Permissive Change: This Class II Permissive Change is to integrate this module into a specific host, HP Model: TPN-Q127 The highest reported SAR value is 1.38W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 05/29/2013 Application Dated: 05/24/2013 |
| HP Inc. |
| 1501 Page Mill Road |
| Palo Alto, CA 94304 |
| Attention: David Adams , Strategist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94HNAR01 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n WI-FI + BT COMBO ADAPTER |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC ND | 15E | 5180.0 - 5240.0 | 0.0245 | ||
| CC ND | 15E | 5190.0 - 5230.0 | 0.0126 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0246 | ||
| CC ND | 15E | 5270.0 - 5310.0 | 0.0113 | ||
| CC ND | 15E | 5500.0 - 5600.0 | 0.025 | ||
| CC ND | 15E | 5510.0 - 5600.0 | 0.0119 | ||
| CC ND | 15E | 5650.0 - 5700.0 | 0.022 | ||
| CC ND | 15E | 5650.0 - 5670.0 | 0.01 |
| Single Modular Approval. Power listed is maximum conducted output power. Operations in 5.15-5.25GHz band are for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 3.08dBi in 5.2GHz band. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz and 40MHz bandwidth modes. (05/21/2013) Class II Permissive Change: This Class II Permissive Change is to integrate this module into a specific host, HP Model: TPN-Q127. The highest reported SAR value is 1.15W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application mXl+wf/tH+kbEthJ1xoa7A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 1501 Page Mill Road Palo Alto, CA 94304 United States |
Date of Grant: 05/29/2013 Application Dated: 05/24/2013 |
| Attention: David Adams , Strategist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94HNAR01 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n WI-FI + BT COMBO ADAPTER |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC ND | 15E | 5180.0 - 5240.0 | 0.0245 | ||
| CC ND | 15E | 5190.0 - 5230.0 | 0.0126 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0246 | ||
| CC ND | 15E | 5270.0 - 5310.0 | 0.0113 | ||
| CC ND | 15E | 5500.0 - 5600.0 | 0.025 | ||
| CC ND | 15E | 5510.0 - 5600.0 | 0.0119 | ||
| CC ND | 15E | 5650.0 - 5700.0 | 0.022 | ||
| CC ND | 15E | 5650.0 - 5670.0 | 0.01 |
| Single Modular Approval. Power listed is maximum conducted output power. Operations in 5.15-5.25GHz band are for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 3.08dBi in 5.2GHz band. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz and 40MHz bandwidth modes. (05/21/2013) Class II Permissive Change: This Class II Permissive Change is to integrate this module into a specific host, HP Model: TPN-Q127. The highest reported SAR value is 1.15W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 05/29/2013 Application Dated: 05/24/2013 |
| HP Inc. |
| 1501 Page Mill Road |
| Palo Alto, CA 94304 |
| Attention: David Adams , Strategist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94HNAR01 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11 a/b/g/n WI-FI + BT COMBO ADAPTER |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0023 |
| Single Modular Approval. Power listed is maximum conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. (05/21/2013) Class II Permissive Change: This Class II Permissive Change is to integrate this module into a specific host, HP Model: TPN-Q127. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application GH+W6bzp7t5meGuneykJZQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 1501 Page Mill Road Palo Alto, CA 94304 United States |
Date of Grant: 05/29/2013 Application Dated: 05/24/2013 |
| Attention: David Adams , Strategist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94HNAR01 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11 a/b/g/n WI-FI + BT COMBO ADAPTER |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0023 |
| Single Modular Approval. Power listed is maximum conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. (05/21/2013) Class II Permissive Change: This Class II Permissive Change is to integrate this module into a specific host, HP Model: TPN-Q127. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 05/21/2013 Application Dated: 05/17/2013 |
| HP Inc. |
| 1501 Page Mill Road |
| Palo Alto, CA 94304 |
| Attention: David Adams , Strategist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94HNAR01 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g/n WI-FI+BT combo adapter |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1702 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.1069 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.1524 | ||
| CC | 15C | 5755.0 - 5795.0 | 0.1135 |
| Single Modular Transmitter. Power listed is maximum conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application DMBXCgw5JTu2V6eZnrJmPQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 1501 Page Mill Road Palo Alto, CA 94304 United States |
Date of Grant: 05/21/2013 Application Dated: 05/17/2013 |
| Attention: David Adams , Strategist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94HNAR01 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g/n WI-FI+BT combo adapter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1702 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.1069 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.1524 | ||
| CC | 15C | 5755.0 - 5795.0 | 0.1135 |
| Single Modular Transmitter. Power listed is maximum conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 05/21/2013 Application Dated: 05/17/2013 |
| HP Inc. |
| 1501 Page Mill Road |
| Palo Alto, CA 94304 |
| Attention: David Adams , Strategist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94HNAR01 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11 a/b/g/n WI-FI+BT combo adapter |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0023 |
| Single Modular Approval. Power listed is maximum conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application b8kYs6NhIDM7s/G9d6mwJQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 1501 Page Mill Road Palo Alto, CA 94304 United States |
Date of Grant: 05/21/2013 Application Dated: 05/17/2013 |
| Attention: David Adams , Strategist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94HNAR01 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11 a/b/g/n WI-FI+BT combo adapter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0023 |
| Single Modular Approval. Power listed is maximum conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 05/21/2013 Application Dated: 05/17/2013 |
| HP Inc. |
| 1501 Page Mill Road |
| Palo Alto, CA 94304 |
| Attention: David Adams , Strategist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94HNAR01 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n WI-FI+BT combo adapter |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC ND | 15E | 5180.0 - 5240.0 | 0.0245 | ||
| CC ND | 15E | 5190.0 - 5230.0 | 0.0126 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0246 | ||
| CC ND | 15E | 5270.0 - 5310.0 | 0.0113 | ||
| CC ND | 15E | 5500.0 - 5600.0 | 0.025 | ||
| CC ND | 15E | 5510.0 - 5600.0 | 0.0119 | ||
| CC ND | 15E | 5650.0 - 5700.0 | 0.022 | ||
| CC ND | 15E | 5650.0 - 5670.0 | 0.01 |
| Single Modular Approval. Power listed is maximum conducted output power. Operations in 5.15-5.25GHz band are for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 3.08dBi in 5.2GHz band. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application ADhQv2BLAnSoEnRYkS1rQQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 1501 Page Mill Road Palo Alto, CA 94304 United States |
Date of Grant: 05/21/2013 Application Dated: 05/17/2013 |
| Attention: David Adams , Strategist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94HNAR01 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n WI-FI+BT combo adapter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC ND | 15E | 5180.0 - 5240.0 | 0.0245 | ||
| CC ND | 15E | 5190.0 - 5230.0 | 0.0126 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0246 | ||
| CC ND | 15E | 5270.0 - 5310.0 | 0.0113 | ||
| CC ND | 15E | 5500.0 - 5600.0 | 0.025 | ||
| CC ND | 15E | 5510.0 - 5600.0 | 0.0119 | ||
| CC ND | 15E | 5650.0 - 5700.0 | 0.022 | ||
| CC ND | 15E | 5650.0 - 5670.0 | 0.01 |
| Single Modular Approval. Power listed is maximum conducted output power. Operations in 5.15-5.25GHz band are for indoor use only. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 3.08dBi in 5.2GHz band. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |