FCC ID B94HNQR03
2x2 802.11a/b/g/n-BT COMBO SDIO MODULE
by HP Inc.
Grantee Code: B94 Product Code: HNQR03
Latest application date: 2012-09-21
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2012-09-21 |
| 2402-2480 MHz | Original Equipment | 2012-09-21 |
| 5180-5240 MHz | Original Equipment | 2012-09-21 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| USERS MANUAL | Users Manual | 2013-03-19 | PDF 1.9 MB |
| User Manual | Users Manual | 2013-03-19 | PDF 1.9 MB |
| INTERNAL PHOTOS | Internal Photos | 2013-03-19 | PDF 885.7 KB |
| INTERNAL PHOTOS ANTENNA LOCATION | Internal Photos | 2013-03-19 | PDF 139.5 KB |
| Internal Photos | Internal Photos | 2013-03-19 | PDF 885.7 KB |
| Internal Photos Antenna Location | Internal Photos | 2013-03-19 | PDF 139.5 KB |
| EXTERNAL PHOTOS | External Photos | 2013-03-19 | PDF 332 KB |
| External Photos | External Photos | 2013-03-19 | PDF 332 KB |
| POA | External Photos | 2012-09-21 | PDF 48.3 KB |
| LABEL SAMPLE AND LOCATION | ID Label/Location Info | 2012-09-21 | PDF 125.7 KB |
| Label Info | ID Label/Location Info | 2012-09-21 | PDF 125.7 KB |
| Label Location & Sample | ID Label/Location Info | 2012-09-21 | PDF 125.7 KB |
| TEST SETUP PHOTOS DFS | Test Setup Photos | 2013-03-19 | PDF 60.3 KB |
| TEST SETUP PHOTOS NII | Test Setup Photos | 2013-03-19 | PDF 242.9 KB |
| Test Setup Photos | Test Setup Photos | 2013-03-19 | PDF 257.9 KB |
| Test Setup Photos 1 | Test Setup Photos | 2013-03-19 | PDF 347.8 KB |
| Test Setup Photos 2 | Test Setup Photos | 2013-03-19 | PDF 257.4 KB |
| TEST REPORT DFS | Test Report | 2012-09-21 | PDF 685.3 KB |
| Test Report | Test Report | 2012-09-21 | PDF 1 MB |
| Test Report DTS | Test Report | 2012-09-21 | PDF 3.1 MB |
| Test Report DTS BT | Test Report | 2012-09-21 | PDF 1 MB |
| Test Report NII | Test Report | 2012-09-21 | PDF 5.4 MB |
| ADHOC MODE DECLARATION | Cover Letter(s) | 2012-09-21 | PDF 47.8 KB |
| AUTHORIZATION LETTER | Cover Letter(s) | 2012-09-21 | PDF 54.6 KB |
| Authorization Letter | Cover Letter(s) | 2012-09-21 | PDF 54.6 KB |
| Confidential Letter | Cover Letter(s) | 2012-09-21 | PDF 49.6 KB |
| DOC | Cover Letter(s) | 2012-09-21 | PDF 44.9 KB |
| DOC Letter | Cover Letter(s) | 2012-09-21 | PDF 44.9 KB |
| LONG TERM CONFIDENTIAL LETTER | Cover Letter(s) | 2012-09-21 | PDF 49.6 KB |
| Modular Approval Letter Rev2 | Cover Letter(s) | 2012-09-21 | PDF 52.5 KB |
| POA | Cover Letter(s) | 2012-09-21 | PDF 48.3 KB |
| SHORT TERM CONFIDENTIALITY LETTER | Cover Letter(s) | 2012-09-21 | PDF 52.4 KB |
| Short Term Confidential Letter | Cover Letter(s) | 2012-09-21 | PDF 52.4 KB |
| RF EXPOSURE | RF Exposure Info | 2012-09-21 | PDF 495.7 KB |
| RF Exposure | RF Exposure Info | 2012-09-21 | PDF 495.7 KB |
Application Information
| Application ID | yygsTcSW1DmeLtPHKn992w== |
|---|---|
| Final Action Date | 2012-09-21 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0020305058 |
| Model | HNQR03 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | 2x2 802.11a/b/g/n-BT COMBO SDIO MODULE |
| Responsible Party | David P. Adams, Strategist, dadams@hp.com  , 650-236-8524 |
| Test Firm | Alex Chen, Sporton International Inc., alex@sporton.com.tw  , 886-3-327-3456 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 03/19/2013 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Transmitter. Power listed is maximum conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 3.6dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| yygsTcSW1DmeLtPHKn992w== | 2012-09-21 | Original Equipment |
| sfpEZeD4pAFRrdbA64lsXg== | 2012-09-21 | Original Equipment |
| b/HTGKQScOPE5zVmHnJSAw== | 2012-09-21 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.0033 | 15C | CC, MO |
| 2402-2480 MHz | 0.0062000 | 15C | CC |
| 2412-2462 MHz | 0.2877 | 15C | CC, MO |
| 5180-5240 MHz | 0.0329 | 15E | CC, MO |
| 5190-5230 MHz | 0.0252 | 15E | CC, MO |
| 5260-5320 MHz | 0.0329 | 15E | CC, MO |
| 5270-5310 MHz | 0.0249 | 15E | CC, MO |
| 5500-5600 MHz | 0.0316 | 15E | CC, MO |
| 5510-5600 MHz | 0.0258 | 15E | CC, MO |
| 5650-5700 MHz | 0.0316 | 15E | CC, MO |
| 5650-5670 MHz | 0.0258 | 15E | CC, MO |
| 5745-5825 MHz | 0.0877 | 15C | CC, MO |
| 5755-5795 MHz | 0.0762 | 15C | CC, MO |
Grants
TCB Grant - Application yygsTcSW1DmeLtPHKn992w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 09/21/2012 Application Dated: 09/20/2012 |
| HP Inc. |
| 1501 Page Mill Road |
| Palo Alto, CA 94304 |
| Attention: David Adams , Strategist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94HNQR03 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2x2 802.11a/b/g/n-BT COMBO SDIO MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0062 |
| Single Modular Transmitter. Power listed is maximum conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 3.6dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application yygsTcSW1DmeLtPHKn992w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 1501 Page Mill Road Palo Alto, CA 94304 United States |
Date of Grant: 09/21/2012 Application Dated: 09/20/2012 |
| Attention: David Adams , Strategist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94HNQR03 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2x2 802.11a/b/g/n-BT COMBO SDIO MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0062 |
| Single Modular Transmitter. Power listed is maximum conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 3.6dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 09/21/2012 Application Dated: 09/20/2012 |
| HP Inc. |
| 1501 Page Mill Road |
| Palo Alto, CA 94304 |
| Attention: David Adams , Strategist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94HNQR03 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2x2 802.11a/b/g/n-BT COMBO SDIO MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.0033 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2877 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.0877 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.0762 |
| Single Modular Transmitter. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 3.6dBi and 4.76dBi in 2.4GHz and 5.8GHz bands, respectively. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application sfpEZeD4pAFRrdbA64lsXg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 1501 Page Mill Road Palo Alto, CA 94304 United States |
Date of Grant: 09/21/2012 Application Dated: 09/20/2012 |
| Attention: David Adams , Strategist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94HNQR03 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2x2 802.11a/b/g/n-BT COMBO SDIO MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.0033 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2877 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.0877 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.0762 |
| Single Modular Transmitter. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 3.6dBi and 4.76dBi in 2.4GHz and 5.8GHz bands, respectively. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 09/21/2012 Application Dated: 09/20/2012 |
| HP Inc. |
| 1501 Page Mill Road |
| Palo Alto, CA 94304 |
| Attention: David Adams , Strategist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94HNQR03 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2X2 802.11a/b/g/n - BT COMBO SDIO MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0329 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.0252 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.0329 | ||
| CC MO | 15E | 5270.0 - 5310.0 | 0.0249 | ||
| CC MO | 15E | 5500.0 - 5600.0 | 0.0316 | ||
| CC MO | 15E | 5650.0 - 5700.0 | 0.0316 | ||
| CC MO | 15E | 5510.0 - 5600.0 | 0.0258 | ||
| CC MO | 15E | 5650.0 - 5670.0 | 0.0258 |
| Single Modular Approval. Power listed is maximum combined conducted output power in 802.11n mode. Operations in 5.15-5.25GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 3.08dBi in 5.2GHz band. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application b/HTGKQScOPE5zVmHnJSAw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 1501 Page Mill Road Palo Alto, CA 94304 United States |
Date of Grant: 09/21/2012 Application Dated: 09/20/2012 |
| Attention: David Adams , Strategist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94HNQR03 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 2X2 802.11a/b/g/n - BT COMBO SDIO MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0329 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.0252 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.0329 | ||
| CC MO | 15E | 5270.0 - 5310.0 | 0.0249 | ||
| CC MO | 15E | 5500.0 - 5600.0 | 0.0316 | ||
| CC MO | 15E | 5650.0 - 5700.0 | 0.0316 | ||
| CC MO | 15E | 5510.0 - 5600.0 | 0.0258 | ||
| CC MO | 15E | 5650.0 - 5670.0 | 0.0258 |
| Single Modular Approval. Power listed is maximum combined conducted output power in 802.11n mode. Operations in 5.15-5.25GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing or in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 3.08dBi in 5.2GHz band. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20MHz and 40MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |