FCC ID B94RSVLD0608
802.11b/g Radio Module
by HP Inc.
Grantee Code: B94 Product Code: RSVLD0608
Latest application date: 2007-08-22
FCC ID Device Details
| FCC ID | B94RSVLD0608 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | B94 |
| Product Code | RSVLD0608 |
| Applicant Business | HP Inc. 🇺🇸 |
| Related Domains |  hp.com  ccsemc.com |
| Equipment Class | 802.11b/g Radio Module |
| Test Firm | Compliance Certification Services |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2007-08-22 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2007-08-03 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2007-02-01 |
| 2412-2462 MHz | Original Equipment | 2006-11-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2006-11-13 | PDF 487.5 KB |
| Internal Photos | Internal Photos | 2007-08-03 | PDF 270 KB |
| Internal Photos | Internal Photos | 2006-11-13 | PDF 468.1 KB |
| External Photos | External Photos | 2006-11-13 | PDF 450 KB |
| Label | ID Label/Location Info | 2007-08-03 | PDF 154.2 KB |
| FCC ID Label | ID Label/Location Info | 2006-11-13 | PDF 14 KB |
| Setup Photos | Test Setup Photos | 2007-08-03 | PDF 131.1 KB |
| Setup Photos | Test Setup Photos | 2007-02-01 | PDF 374.8 KB |
| Setup Photos | Test Setup Photos | 2006-11-13 | PDF 374.7 KB |
| Report | Test Report | 2007-08-22 | PDF 165.5 KB |
| Report | Test Report | 2007-08-03 | PDF 423.3 KB |
| Test Report | Test Report | 2007-02-01 | PDF 1.8 MB |
| Test Report | Test Report | 2006-11-13 | PDF 1.5 MB |
| Authorization Letter | Cover Letter(s) | 2007-08-22 | PDF 69.9 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2007-08-22 | PDF 73.4 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2007-08-03 | PDF 76.2 KB |
| Request for Confidentiality | Cover Letter(s) | 2007-08-03 | PDF 63.4 KB |
| Authorization Letter | Cover Letter(s) | 2007-02-01 | PDF 48.2 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2007-02-01 | PDF 158.9 KB |
| Authorization Letter | Cover Letter(s) | 2006-11-13 | PDF 404.9 KB |
| Modular Approval Letter | Cover Letter(s) | 2006-11-13 | PDF 69 KB |
| Request for Confidentiality | Cover Letter(s) | 2006-11-13 | PDF 161.2 KB |
| Antennan Specification | Parts List/Tune Up Info | 2007-02-01 | PDF 84.5 KB |
| Antennan Specification | Parts List/Tune Up Info | 2006-11-13 | PDF 55.3 KB |
| Block Diagram Metadata only | Block Diagram | PDF 10.1 KB | |
| Schematics Metadata only | Schematics | PDF 353 KB | |
| Operational Description Metadata only | Operational Description | PDF 39 KB |
Application Information
| Application ID | DxG8fUbpuP0vmP9R9Xqveg== |
|---|---|
| Final Action Date | 2007-08-22 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0020305058 |
| Model | RSVLD0608 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11b/g Radio Module |
| Responsible Party | David P. Adams, Strategist, dadams@hp.com , 650-236-8524 |
| Technical Contact | Thu Chan, COMPLIANCE CERTIFICATION SERVICES, Thu.Chan@CCSEMC.COM , 510-771-1000 |
| Non-Technical Contact | Thu Chan, COMPLIANCE CERTIFICATION SERVICES, Thu.Chan@CCSEMC.COM , 510-771-1000 |
| Test Firm | Barbara Judge, Compliance Certification Services, bjudge@ccsemc.com , 510-771-1104 |
| TCB Email | mike.kuo@ccsemc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change to allow co-located operation with FCCID: B94RSVLD0602. Modular approval. Power output listed is conducted. This module may be installed only by the OEM or an OEM integrator. Co-located Bluetooth operating conditions for mobile RF exposure category operation have been evaluated as described in this filing. Separate equipment certification is needed for other co-location configurations and RF exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. OEM integrators and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. End users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| DxG8fUbpuP0vmP9R9Xqveg== | 2007-08-22 | Class II permissive change or modification of presently authorized equipment |
| f8YtvynnltBI1VIvnn4ErQ== | 2007-08-03 | Class II permissive change or modification of presently authorized equipment |
| XRkwyxMMSyYS2/ClPGMHZA== | 2007-02-01 | Class II permissive change or modification of presently authorized equipment |
| 1MOJr6iZHoN8jCAWHpd9hg== | 2006-11-13 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.2190000 | 15C |
Grants
TCB Grant - Application XRkwyxMMSyYS2/ClPGMHZA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 | Date of Grant: 02/01/2007 Application Dated: 02/01/2007 |
| Hewlett-Packard Company |
| 1501 Page Mill Road |
| Palo Alto, CA 94304 |
| Attention: David Adams , US/Canada Technical Regulations Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94RSVLD0608 |
| Name of Grantee: | Hewlett-Packard Company |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.219 |
| Class II permissive change filing. Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application XRkwyxMMSyYS2/ClPGMHZA==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Hewlett-Packard Company 1501 Page Mill Road Palo Alto, CA 94304 United States | Date of Grant: 02/01/2007 Application Dated: 02/01/2007 |
| Attention: David Adams , US/Canada Technical Regulations Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94RSVLD0608 |
| Name of Grantee: | Hewlett-Packard Company |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.219 |
| Class II permissive change filing. Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
|
| Mail To: |
| EA355106 |
TCB Grant - Application f8YtvynnltBI1VIvnn4ErQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 | Date of Grant: 08/03/2007 Application Dated: 08/03/2007 |
| HP Inc. |
| 1501 Page Mill Road |
| Palo Alto, CA 94304 |
| Attention: David Adams , Strategist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94RSVLD0608 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.219 |
| Class II permissive filing by modifying antenna connector section. Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application f8YtvynnltBI1VIvnn4ErQ==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| HP Inc. 1501 Page Mill Road Palo Alto, CA 94304 United States | Date of Grant: 08/03/2007 Application Dated: 08/03/2007 |
| Attention: David Adams , Strategist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94RSVLD0608 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.219 |
| Class II permissive filing by modifying antenna connector section. Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
|
| Mail To: |
| EA287714 |
TCB Grant - Application DxG8fUbpuP0vmP9R9Xqveg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 | Date of Grant: 08/22/2007 Application Dated: 08/21/2007 |
| HP Inc. |
| 1501 Page Mill Road |
| Palo Alto, CA 94304 |
| Attention: David Adams , Strategist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94RSVLD0608 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.219 |
| Class II permissive change to allow co-located operation with FCCID: B94RSVLD0602. Modular approval. Power output listed is conducted. This module may be installed only by the OEM or an OEM integrator. Co-located Bluetooth operating conditions for mobile RF exposure category operation have been evaluated as described in this filing. Separate equipment certification is needed for other co-location configurations and RF exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. OEM integrators and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. End users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application DxG8fUbpuP0vmP9R9Xqveg==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| HP Inc. 1501 Page Mill Road Palo Alto, CA 94304 United States | Date of Grant: 08/22/2007 Application Dated: 08/21/2007 |
| Attention: David Adams , Strategist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94RSVLD0608 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.219 |
| Class II permissive change to allow co-located operation with FCCID: B94RSVLD0602. Modular approval. Power output listed is conducted. This module may be installed only by the OEM or an OEM integrator. Co-located Bluetooth operating conditions for mobile RF exposure category operation have been evaluated as described in this filing. Separate equipment certification is needed for other co-location configurations and RF exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. OEM integrators and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. End users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
|
| Mail To: |
| EA549932 |
TCB Grant - Application 1MOJr6iZHoN8jCAWHpd9hg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 11/13/2006 Application Dated: 11/13/2006 |
| HP Inc. |
| 3390 East Harmony Road |
| Fort Collins, CO 80528 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94RSVLD0608 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.219 |
| Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application 1MOJr6iZHoN8jCAWHpd9hg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States |
Date of Grant: 11/13/2006 Application Dated: 11/13/2006 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94RSVLD0608 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.219 |
| Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |