FCC ID B94SNPRC2150
802.11b/g/n (2.4GHz) Wi-Fi + BT / BLE Radio Module
by HP Inc.
Grantee Code: B94 Product Code: SNPRC2150
Latest application date: 2021-03-03
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2021-03-03 |
| 2402-2480 MHz | Original Equipment | 2021-03-03 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2021-08-30 | PDF 505.9 KB |
| Label Location | ID Label/Location Info | 2021-03-03 | PDF 27.4 KB |
| Label Sample | ID Label/Location Info | 2021-03-03 | PDF 333.9 KB |
| DTS BT LE Tsup Photos | Test Setup Photos | 2021-08-30 | PDF 990.9 KB |
| DTS Tsup Photos | Test Setup Photos | 2021-08-30 | PDF 847.5 KB |
| DTS WiFi 2.4G Tsup Photos | Test Setup Photos | 2021-08-30 | PDF 847.4 KB |
| DSS Test Report 1of2 | Test Report | 2021-03-03 | PDF 5.4 MB |
| DSS Test Report 2of2 | Test Report | 2021-03-03 | PDF 5.4 MB |
| DTS BT LE Test Report | Test Report | 2021-03-03 | PDF 4.4 MB |
| DTS WiFi 2.4G Test Report | Test Report | 2021-03-03 | PDF 5.8 MB |
| Confidential Request | Cover Letter(s) | 2021-03-03 | PDF 78.8 KB |
| Confidentiality Request | Cover Letter(s) | 2021-03-03 | PDF 78.8 KB |
| Delegation Letter | Cover Letter(s) | 2021-03-03 | PDF 29.1 KB |
| Modular Approval Letter | Cover Letter(s) | 2021-03-03 | PDF 77.8 KB |
| NDA | Cover Letter(s) | 2021-03-03 | PDF 96.7 KB |
| POA | Cover Letter(s) | 2021-03-03 | PDF 102.1 KB |
| RF Exposure | RF Exposure Info | 2021-03-03 | PDF 437.9 KB |
| Users Manual Metadata only | Users Manual | PDF 285 KB | |
| Internal Photos Metadata only | Internal Photos | PDF 1.2 MB | |
| Block Diagram Metadata only | Block Diagram | PDF 173.6 KB | |
| Schematics Metadata only | Schematics | PDF 913.3 KB | |
| NDA Fully Executed Metadata only | Operational Description | PDF 314.1 KB | |
| OpDes Antenna 1of2 Metadata only | Operational Description | PDF 511.2 KB | |
| OpDes Antenna 2of2 Metadata only | Operational Description | PDF 2.2 MB | |
| Operational Description Metadata only | Operational Description | PDF 188.8 KB | |
| Parts List 1of3 Metadata only | Parts List/Tune Up Info | PDF 67.6 KB | |
| Parts List 2of3 Metadata only | Parts List/Tune Up Info | PDF 65.3 KB | |
| Parts List 3of3 Metadata only | Parts List/Tune Up Info | PDF 63.8 KB | |
| Tuning Procedure Metadata only | Parts List/Tune Up Info | PDF 136 KB |
Application Information
| Application ID | MTL97JkIlLLvlDqadRsh2g== |
|---|---|
| Final Action Date | 2021-03-03 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0008035131 |
| Model | SNPRC2150 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | 802.11b/g/n (2.4GHz) Wi-Fi + BT / BLE Radio Module |
| Responsible Party | Richard P Tarsio, US Canada Technical Regulations, richard.tarsio@hp.com  , 970-898-8713 |
| Test Firm | Kevin Lu, Sporton International (USA) Inc, Kevinlu@sporton-usa.com  , 16692729004 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 08/30/2021 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | This module is HP Inc. proprietary. Power listed is conducted. Single modular approval for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the instructions provided. Separate approval is required for all other configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. End-users must be provided with the transmitting operating conditions for satisfying RF exposure compliance. Also module grantee must ensure that the end user has no manual instructions to remove and install the device. The module grantee is responsible for providing the documentation on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| MTL97JkIlLLvlDqadRsh2g== | 2021-03-03 | Original Equipment |
| 4+pTXgO1cWyaSj10lNPfuQ== | 2021-03-03 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application MTL97JkIlLLvlDqadRsh2g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 03/03/2021 Application Dated: 02/24/2021 |
| HP Inc. |
| 3390 East Harmony Road |
| Fort Collins, CO 80528 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94SNPRC2150 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11b/g/n (2.4GHz) Wi-Fi + BT / BLE Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0085 |
| This module is HP Inc. proprietary. Power listed is conducted. Single modular approval for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the instructions provided. Separate approval is required for all other configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. End-users must be provided with the transmitting operating conditions for satisfying RF exposure compliance. Also module grantee must ensure that the end user has no manual instructions to remove and install the device. The module grantee is responsible for providing the documentation on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
EAS Grant - Application MTL97JkIlLLvlDqadRsh2g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States |
Date of Grant: 03/03/2021 Application Dated: 02/24/2021 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94SNPRC2150 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11b/g/n (2.4GHz) Wi-Fi + BT / BLE Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0085 |
| This module is HP Inc. proprietary. Power listed is conducted. Single modular approval for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the instructions provided. Separate approval is required for all other configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. End-users must be provided with the transmitting operating conditions for satisfying RF exposure compliance. Also module grantee must ensure that the end user has no manual instructions to remove and install the device. The module grantee is responsible for providing the documentation on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 03/03/2021 Application Dated: 02/24/2021 |
| HP Inc. |
| 3390 East Harmony Road |
| Fort Collins, CO 80528 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94SNPRC2150 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g/n (2.4GHz) Wi-Fi + BT / BLE Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0038 | |||
| 15C | 2412.0 - 2462.0 | 0.1119 |
| This module is HP Inc. proprietary. Power listed is conducted. Single modular approval for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the instructions provided. Separate approval is required for all other configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. End-users must be provided with the transmitting operating conditions for satisfying RF exposure compliance. Also module grantee must ensure that the end user has no manual instructions to remove and install the device. The module grantee is responsible for providing the documentation on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
EAS Grant - Application 4+pTXgO1cWyaSj10lNPfuQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States |
Date of Grant: 03/03/2021 Application Dated: 02/24/2021 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94SNPRC2150 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g/n (2.4GHz) Wi-Fi + BT / BLE Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0038 | |||
| 15C | 2412.0 - 2462.0 | 0.1119 |
| This module is HP Inc. proprietary. Power listed is conducted. Single modular approval for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the instructions provided. Separate approval is required for all other configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. End-users must be provided with the transmitting operating conditions for satisfying RF exposure compliance. Also module grantee must ensure that the end user has no manual instructions to remove and install the device. The module grantee is responsible for providing the documentation on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
| Mail To: |