FCC ID B94SNPRC235X
802.11 a/b/g/n/ac/ax WLAN + BT/BLE Radio Module
by HP Inc.
Grantee Code: B94 Product Code: SNPRC235X
Latest application date: 2024-11-11
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2024-11-11 |
| 5180-5240 MHz | Original Equipment | 2024-11-11 |
| 2402-2480 MHz | Original Equipment | 2024-11-11 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual_ rev | Users Manual | 2025-05-10 | PDF 914.3 KB |
| Internal Photos_ rev | Internal Photos | 2025-05-10 | PDF 2.6 MB |
| External Photos_ rev | External Photos | 2025-05-10 | PDF 4 MB |
| Label Sample & Label Location | ID Label/Location Info | 2024-11-11 | PDF 382 KB |
| Test Set Up Photos | Test Setup Photos | 2025-05-10 | PDF 5.3 MB |
| Test Set Up Photos (Antenna spec._ SNPRC-2350) | Test Setup Photos | 2025-05-10 | PDF 468.3 KB |
| Test Set Up Photos (Antenna spec._ SNPRC-2351) | Test Setup Photos | 2025-05-10 | PDF 444 KB |
| Test Set Up Photos (DFS) | Test Setup Photos | 2025-05-10 | PDF 558.2 KB |
| Antenna Datasheet (81EAB815.G23 , 81EAB815.G24) | Test Report | 2024-11-11 | PDF 1.3 MB |
| Antenna Datasheet (ANTX200P002B24553) | Test Report | 2024-11-11 | PDF 2.2 MB |
| Antenna Datasheet (ANTX300P002B24553) | Test Report | 2024-11-11 | PDF 628.2 KB |
| Antenna Datasheet (SNPRC-2350) | Test Report | 2024-11-11 | PDF 5.1 MB |
| Antenna Datasheet (SNPRC-2351) | Test Report | 2024-11-11 | PDF 5.2 MB |
| Test Report (DFS)_ rev | Test Report | 2024-11-11 | PDF 1 MB |
| Test Report (DSS)_ rev | Test Report | 2024-11-11 | PDF 2.2 MB |
| Test Report (DTS-BT LE)_ rev | Test Report | 2024-11-11 | PDF 1.9 MB |
| Test Report (DTS-WLAN)_ rev | Test Report | 2024-11-11 | PDF 4.5 MB |
| Test Report (NII)-1_ rev | Test Report | 2024-11-11 | PDF 5 MB |
| Test Report (NII)-2 | Test Report | 2024-11-11 | PDF 2 MB |
| Attestation (Channel and Mode Declaration) | Attestation Statements | 2024-11-11 | PDF 72.5 KB |
| Attestation (DFS Client Declaration) | Attestation Statements | 2024-11-11 | PDF 94.8 KB |
| Attestation (Designated itself as U.S. local Agent Letter) | Attestation Statements | 2024-11-11 | PDF 60.8 KB |
| Attestation (Statements of part 2.911(d)(5)) | Attestation Statements | 2024-11-11 | PDF 86 KB |
| Confidentiality Request (Long term) | Cover Letter(s) | 2024-11-11 | PDF 71 KB |
| Confidentiality Request (Short term) | Cover Letter(s) | 2024-11-11 | PDF 70.3 KB |
| Cover Letter (Agent Authorization) | Cover Letter(s) | 2024-11-11 | PDF 91.4 KB |
| Cover Letter (Contact Authorization) | Cover Letter(s) | 2024-11-11 | PDF 28.5 KB |
| Cover Letter (Modular Approval Request) | Cover Letter(s) | 2024-11-11 | PDF 80.2 KB |
| RF Exposure Info (MPE)_ rev | RF Exposure Info | 2024-11-11 | PDF 296.1 KB |
| Block Diagram Metadata only | Block Diagram | PDF 335.6 KB | |
| Schematics (SNPRC-2350) Metadata only | Schematics | PDF 660.3 KB | |
| Schematics (SNPRC-2351) Metadata only | Schematics | PDF 735.7 KB | |
| Operational Description_ rev Metadata only | Operational Description | PDF 204.4 KB | |
| Software Operational Description Metadata only | Operational Description | PDF 145.3 KB |
Application Information
| Application ID | Qf975nmPHHeucAQWiYj/ZA== |
|---|---|
| Final Action Date | 2024-11-11 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0025126541 |
| Model | SNPRC235X |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11 a/b/g/n/ac/ax WLAN + BT/BLE Radio Module |
| Responsible Party | Richard P Tarsio, US Canada Technical Regulations, richard.tarsio@hp.com  , 970-898-8713 |
| Agent | Jenny Jenny Jenny, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, jenny.nien@bureauveritas.com  , 88633183232 |
| Test Firm | Ken Liu, Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch Hsin, ken.liu@bureauveritas.com , +886-3-2600609 |
| TCB Email | certification@nacsemc.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 05/10/2025 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. This device supports 20/40 MHz bandwidth modes for WLAN. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Qf975nmPHHeucAQWiYj/ZA== | 2024-11-11 | Original Equipment |
| D8TW/WKz5Zb4TGt7q9B5kw== | 2024-11-11 | Original Equipment |
| 2NzxTWf8t2UmxVnrakGGAA== | 2024-11-11 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application Qf975nmPHHeucAQWiYj/ZA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 11/11/2024 Application Dated: 11/10/2024 |
| HP Inc. |
| 3390 East Harmony Road |
| Fort Collins, CO 80528 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94SNPRC235X |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g/n/ac/ax WLAN + BT/BLE Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 | ||
| CC | 15C | 2404.0 - 2478.0 | 0.005 | ||
| CC | 15C | 2412.0 - 2472.0 | 0.897 |
| Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. This device supports 20/40 MHz bandwidth modes for WLAN. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Qf975nmPHHeucAQWiYj/ZA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States |
Date of Grant: 11/11/2024 Application Dated: 11/10/2024 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94SNPRC235X |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g/n/ac/ax WLAN + BT/BLE Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 | ||
| CC | 15C | 2404.0 - 2478.0 | 0.005 | ||
| CC | 15C | 2412.0 - 2472.0 | 0.897 |
| Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. This device supports 20/40 MHz bandwidth modes for WLAN. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 11/11/2024 Application Dated: 11/10/2024 |
| HP Inc. |
| 3390 East Harmony Road |
| Fort Collins, CO 80528 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94SNPRC235X |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n/ac/ax WLAN + BT/BLE Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.064 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.067 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.14 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.141 |
| Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. This device supports 20/40/80 MHz bandwidth modes. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application D8TW/WKz5Zb4TGt7q9B5kw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States |
Date of Grant: 11/11/2024 Application Dated: 11/10/2024 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94SNPRC235X |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n/ac/ax WLAN + BT/BLE Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.064 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.067 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.14 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.141 |
| Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. This device supports 20/40/80 MHz bandwidth modes. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 11/11/2024 Application Dated: 11/10/2024 |
| HP Inc. |
| 3390 East Harmony Road |
| Fort Collins, CO 80528 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94SNPRC235X |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11 a/b/g/n/ac/ax WLAN + BT/BLE Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 2NzxTWf8t2UmxVnrakGGAA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States |
Date of Grant: 11/11/2024 Application Dated: 11/10/2024 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94SNPRC235X |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11 a/b/g/n/ac/ax WLAN + BT/BLE Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Power listed is maximum conducted output power. Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |