FCC ID B94VCVRA1712
IEEE 802.11a/b/g/n + Bluetooth radio module
by HP Inc.
Grantee Code: B94 Product Code: VCVRA1712
Latest application date: 2020-09-21
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-09-21 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-09-21 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2020-09-21 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2019-09-24 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-09-24 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-09-24 |
| 2402-2480 MHz | Original Equipment | 2018-01-25 |
| 2402-2480 MHz | Original Equipment | 2018-01-25 |
| 5180-5240 MHz | Original Equipment | 2018-01-25 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Internal Photos | Internal Photos | 2020-03-22 | PDF 872.2 KB |
| Internal Photos | Internal Photos | 2018-07-10 | PDF 597.9 KB |
| External Photos | External Photos | 2020-03-22 | PDF 676 KB |
| External Photos | External Photos | 2018-07-10 | PDF 1.3 MB |
| Label | ID Label/Location Info | 2019-09-24 | PDF 166.7 KB |
| Label & Location | ID Label/Location Info | 2018-01-25 | PDF 620.1 KB |
| Test Setup Photos | Test Setup Photos | 2021-03-20 | PDF 1.1 MB |
| Test Setup Photos | Test Setup Photos | 2020-03-22 | PDF 741 KB |
| Test Setup Photos | Test Setup Photos | 2018-07-10 | PDF 2.4 MB |
| Test Report | Test Report | 2020-09-21 | PDF 1.1 MB |
| Test Report | Test Report | 2020-09-21 | PDF 1.7 MB |
| Test Report | Test Report | 2019-09-24 | PDF 1.7 MB |
| Test Report | Test Report | 2018-01-25 | PDF 3.3 MB |
| Test Report | Test Report | 2018-01-25 | PDF 3.4 MB |
| Test Report | Test Report | 2018-01-25 | PDF 5.7 MB |
| Module Approval Letter | Attestation Statements | 2019-09-24 | PDF 42.7 KB |
| Software Configuration Declaration | Attestation Statements | 2018-01-25 | PDF 86.8 KB |
| Agent | Cover Letter(s) | 2020-09-21 | PDF 31 KB |
| C2PC Letter | Cover Letter(s) | 2020-09-21 | PDF 29.8 KB |
| Confidentiality | Cover Letter(s) | 2020-09-21 | PDF 33.7 KB |
| Agent Authorization Letter | Cover Letter(s) | 2019-09-24 | PDF 50.6 KB |
| C2PC Request Letter | Cover Letter(s) | 2019-09-24 | PDF 30.7 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2019-09-24 | PDF 51.1 KB |
| Authorization | Cover Letter(s) | 2018-01-25 | PDF 50.6 KB |
| Confidentality | Cover Letter(s) | 2018-01-25 | PDF 64.7 KB |
| Confidentality NDA | Cover Letter(s) | 2018-01-25 | PDF 2.2 MB |
| Confidentiality | Cover Letter(s) | 2018-01-25 | PDF 64.7 KB |
| Confidentiality NDA | Cover Letter(s) | 2018-01-25 | PDF 2.2 MB |
| Modular Approval Request | Cover Letter(s) | 2018-01-25 | PDF 42.7 KB |
| Software Configuration Declaration | Cover Letter(s) | 2018-01-25 | PDF 86.8 KB |
| RF Exposure | RF Exposure Info | 2020-09-21 | PDF 137.7 KB |
| RF Exposure | RF Exposure Info | 2018-01-25 | PDF 95.9 KB |
| User Manual Metadata only | Users Manual | PDF 1 MB | |
| Block Diagram Metadata only | Block Diagram | PDF 111.5 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 52.5 KB | |
| Schematics Metadata only | Schematics | PDF 159.1 KB | |
| Schematics Metadata only | Schematics | PDF 529.5 KB | |
| Operational Description Metadata only | Operational Description | PDF 1.1 MB | |
| Operational Description 1 Metadata only | Operational Description | PDF 1.1 MB | |
| Operational Description 2 Metadata only | Operational Description | PDF 236.4 KB | |
| Operational Description 3 Metadata only | Operational Description | PDF 116.7 KB | |
| Operational Description 4 Metadata only | Operational Description | PDF 554.6 KB | |
| Operational Description 5 Metadata only | Operational Description | PDF 148.5 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 357.7 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 489.7 KB |
Application Information
| Application ID | YllEjiEjOWrUe3f/3FAB4g== |
|---|---|
| Final Action Date | 2020-09-21 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008035131 |
| Model | VCVRA1712 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | IEEE 802.11a/b/g/n + Bluetooth radio module |
| Responsible Party | Richard P Tarsio, US Canada Technical Regulations, richard.tarsio@hp.com  , 970-898-8713 |
| Test Firm | Gordon Hurst, MiCOM Labs, gordon_hurst@micomlabs.com  , 925-462-0304 |
| TCB Email | certification@micomlabs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 03/20/2021 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC to add new vendor diplexer. Single Modular Approval Output power listed is conducted power. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna[s] used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| YllEjiEjOWrUe3f/3FAB4g== | 2020-09-21 | Class II permissive change or modification of presently authorized equipment |
| TXLTx3n2H8srlnP2/wMaag== | 2020-09-21 | Class II permissive change or modification of presently authorized equipment |
| QZu9bKJyVmIvZJbJ43RBTw== | 2020-09-21 | Class II permissive change or modification of presently authorized equipment |
| gqy7Z6C3hiwdefn7vDbnsw== | 2019-09-24 | Class II permissive change or modification of presently authorized equipment |
| gRMHaFGSx2PfDEQjChiC7A== | 2019-09-24 | Class II permissive change or modification of presently authorized equipment |
| XQqWGbZKeeset/kHKv73+w== | 2019-09-24 | Class II permissive change or modification of presently authorized equipment |
| w2DaRlBa3WegF3RDS7zsjQ== | 2018-01-25 | Original Equipment |
| DUo59DfVGCxyVeXPBLC96g== | 2018-01-25 | Original Equipment |
| 0KmBAfDVXr76Oyyc/5xVGQ== | 2018-01-25 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application YllEjiEjOWrUe3f/3FAB4g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 09/21/2020 Application Dated: 09/21/2020 |
| HP Inc. |
| 3390 East Harmony Road |
| Fort Collins, CO 80528 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94VCVRA1712 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | IEEE 802.11a/b/g/n + Bluetooth radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 2402.0 - 2480.0 | 0.0053 |
| C2PC to add new vendor diplexer. Single Modular Approval Output power listed is conducted power. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna[s] used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application YllEjiEjOWrUe3f/3FAB4g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States |
Date of Grant: 09/21/2020 Application Dated: 09/21/2020 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94VCVRA1712 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | IEEE 802.11a/b/g/n + Bluetooth radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 2402.0 - 2480.0 | 0.0053 |
| C2PC to add new vendor diplexer. Single Modular Approval Output power listed is conducted power. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna[s] used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 09/24/2019 Application Dated: 09/24/2019 |
| HP Inc. |
| 3390 East Harmony Road |
| Fort Collins, CO 80528 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94VCVRA1712 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | IEEE 802.11a/b/g/n + Bluetooth radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 2402.0 - 2480.0 | 0.0053 |
| C2PC to add FFC connector Single Modular Approval Output power listed is conducted power. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna[s] used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application XQqWGbZKeeset/kHKv73+w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States |
Date of Grant: 09/24/2019 Application Dated: 09/24/2019 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94VCVRA1712 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | IEEE 802.11a/b/g/n + Bluetooth radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 2402.0 - 2480.0 | 0.0053 |
| C2PC to add FFC connector Single Modular Approval Output power listed is conducted power. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna[s] used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 01/25/2018 Application Dated: 01/12/2018 |
| HP Inc. |
| 3390 East Harmony Road |
| Fort Collins, CO 80528 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94VCVRA1712 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 2402.0 - 2480.0 | 0.0057 | ||
| 20 CC | 15C | 2412.0 - 2462.0 | 0.071 |
| Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna[s] used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application w2DaRlBa3WegF3RDS7zsjQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States |
Date of Grant: 01/25/2018 Application Dated: 01/12/2018 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94VCVRA1712 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 2402.0 - 2480.0 | 0.0057 | ||
| 20 CC | 15C | 2412.0 - 2462.0 | 0.071 |
| Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna[s] used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 09/21/2020 Application Dated: 09/21/2020 |
| HP Inc. |
| 3390 East Harmony Road |
| Fort Collins, CO 80528 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94VCVRA1712 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.11a/b/g/n + Bluetooth radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 2402.0 - 2480.0 | 0.0057 | ||
| 20 CC | 15C | 2412.0 - 2462.0 | 0.071 |
| C2PC to add new vendor diplexer. Single Modular Approval Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna[s] used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application TXLTx3n2H8srlnP2/wMaag==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States |
Date of Grant: 09/21/2020 Application Dated: 09/21/2020 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94VCVRA1712 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.11a/b/g/n + Bluetooth radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 2402.0 - 2480.0 | 0.0057 | ||
| 20 CC | 15C | 2412.0 - 2462.0 | 0.071 |
| C2PC to add new vendor diplexer. Single Modular Approval Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna[s] used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 09/21/2020 Application Dated: 09/21/2020 |
| HP Inc. |
| 3390 East Harmony Road |
| Fort Collins, CO 80528 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94VCVRA1712 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | IEEE 802.11a/b/g/n + Bluetooth radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15E | 5180.0 - 5240.0 | 0.046 | ||
| 20 CC | 15E | 5260.0 - 5320.0 | 0.042 | ||
| 20 CC | 15E | 5500.0 - 5720.0 | 0.059 | ||
| 20 CC | 15E | 5745.0 - 5825.0 | 0.057 |
| C2PC to add new vendor diplexer. Single Modular Approval Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna[s] used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Approval is for operation as a client only device without radar detection or ad-hoc capability. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application QZu9bKJyVmIvZJbJ43RBTw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States |
Date of Grant: 09/21/2020 Application Dated: 09/21/2020 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94VCVRA1712 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | IEEE 802.11a/b/g/n + Bluetooth radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15E | 5180.0 - 5240.0 | 0.046 | ||
| 20 CC | 15E | 5260.0 - 5320.0 | 0.042 | ||
| 20 CC | 15E | 5500.0 - 5720.0 | 0.059 | ||
| 20 CC | 15E | 5745.0 - 5825.0 | 0.057 |
| C2PC to add new vendor diplexer. Single Modular Approval Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna[s] used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Approval is for operation as a client only device without radar detection or ad-hoc capability. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 09/24/2019 Application Dated: 09/24/2019 |
| HP Inc. |
| 3390 East Harmony Road |
| Fort Collins, CO 80528 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94VCVRA1712 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.11a/b/g/n + Bluetooth radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 2402.0 - 2480.0 | 0.0057 | ||
| 20 CC | 15C | 2412.0 - 2462.0 | 0.071 |
| C2PC to add FFC connector Single Modular Approval Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna[s] used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application gRMHaFGSx2PfDEQjChiC7A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States |
Date of Grant: 09/24/2019 Application Dated: 09/24/2019 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94VCVRA1712 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.11a/b/g/n + Bluetooth radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 2402.0 - 2480.0 | 0.0057 | ||
| 20 CC | 15C | 2412.0 - 2462.0 | 0.071 |
| C2PC to add FFC connector Single Modular Approval Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna[s] used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 09/24/2019 Application Dated: 09/24/2019 |
| HP Inc. |
| 3390 East Harmony Road |
| Fort Collins, CO 80528 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94VCVRA1712 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | IEEE 802.11a/b/g/n + Bluetooth radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15E | 5180.0 - 5240.0 | 0.046 | ||
| 20 CC | 15E | 5260.0 - 5320.0 | 0.042 | ||
| 20 CC | 15E | 5500.0 - 5720.0 | 0.059 | ||
| 20 CC | 15E | 5745.0 - 5825.0 | 0.057 |
| C2PC to add FFC connector Single Modular Approval Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna[s] used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Approval is for operation as a client only device without radar detection or ad-hoc capability. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application gqy7Z6C3hiwdefn7vDbnsw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States |
Date of Grant: 09/24/2019 Application Dated: 09/24/2019 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94VCVRA1712 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | IEEE 802.11a/b/g/n + Bluetooth radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15E | 5180.0 - 5240.0 | 0.046 | ||
| 20 CC | 15E | 5260.0 - 5320.0 | 0.042 | ||
| 20 CC | 15E | 5500.0 - 5720.0 | 0.059 | ||
| 20 CC | 15E | 5745.0 - 5825.0 | 0.057 |
| C2PC to add FFC connector Single Modular Approval Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna[s] used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Approval is for operation as a client only device without radar detection or ad-hoc capability. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 01/25/2018 Application Dated: 01/12/2018 |
| HP Inc. |
| 3390 East Harmony Road |
| Fort Collins, CO 80528 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94VCVRA1712 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 2402.0 - 2480.0 | 0.0053 |
| Output power listed is conducted power. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna[s] used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application DUo59DfVGCxyVeXPBLC96g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States |
Date of Grant: 01/25/2018 Application Dated: 01/12/2018 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94VCVRA1712 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 2402.0 - 2480.0 | 0.0053 |
| Output power listed is conducted power. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna[s] used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 01/25/2018 Application Dated: 01/12/2018 |
| HP Inc. |
| 3390 East Harmony Road |
| Fort Collins, CO 80528 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94VCVRA1712 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15E | 5180.0 - 5240.0 | 0.046 | ||
| 20 CC | 15E | 5260.0 - 5320.0 | 0.042 | ||
| 20 CC | 15E | 5500.0 - 5720.0 | 0.059 | ||
| 20 CC | 15E | 5745.0 - 5825.0 | 0.057 |
| Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna[s] used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 0KmBAfDVXr76Oyyc/5xVGQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States |
Date of Grant: 01/25/2018 Application Dated: 01/12/2018 |
| Attention: Richard Tarsio , US Canada Technical Regulations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | B94VCVRA1712 |
| Name of Grantee: | HP Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15E | 5180.0 - 5240.0 | 0.046 | ||
| 20 CC | 15E | 5260.0 - 5320.0 | 0.042 | ||
| 20 CC | 15E | 5500.0 - 5720.0 | 0.059 | ||
| 20 CC | 15E | 5745.0 - 5825.0 | 0.057 |
| Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna[s] used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |