FCC ID B94WM3945ABG

Intel PRO/Wireless 3945ABG Network Connection

by HP Inc.

Grantee Code: B94   Product Code: WM3945ABG
Latest application date: 2007-07-11

FCC ID Device Details

FCC IDB94WM3945ABG
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeB94
Product CodeWM3945ABG
Applicant BusinessHP Inc. 🇺🇸
Related Domains hp.com
Equipment ClassIntel PRO/Wireless 3945ABG Network Connection
Test FirmCompliance Certification Services

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2007-07-11
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2007-07-11
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2007-05-31
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2007-05-31
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2007-03-06
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2007-03-06
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2006-12-18
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2006-09-27
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2006-09-27
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2006-05-11
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2006-05-11
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2006-04-10
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2006-04-10
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2006-02-15
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2006-02-15
2412-2462 MHzOriginal Equipment2006-02-03
5180-5240 MHzOriginal Equipment2006-02-03

Exhibits

DocumentTypeAvailableFile
Manual 434155Users Manual2007-07-11PDF 281 KB
Manual 435748Users Manual2007-07-11PDF 2.5 MB
Manual 435751Users Manual2007-07-11PDF 526.9 KB
Manual 435813Users Manual2007-07-11PDF 526.1 KB
Manual 435816Users Manual2007-07-11PDF 2.6 MB
Regulatory ManualUsers Manual2007-07-11PDF 1.8 MB
Users Manual 1Users Manual2007-05-31PDF 488.3 KB
Users Manual 1Users Manual2007-05-31PDF 3.2 MB
Users Manual 2Users Manual2007-05-31PDF 488.3 KB
Users Manual 2Users Manual2007-05-31PDF 3.2 MB
Notebook User ManualUsers Manual2006-09-27PDF 3.4 MB
Regulaory informationUsers Manual2006-09-27PDF 758.2 KB
Regulatory InformationUsers Manual2006-09-27PDF 758.2 KB
Regulatory InfoUsers Manual2006-05-11PDF 1.7 MB
Tablet PC TourUsers Manual2006-05-11PDF 487 KB
Users ManualUsers Manual2006-05-11PDF 3 MB
Notebook User manualUsers Manual2006-02-15PDF 1.2 MB
Notebook user manualUsers Manual2006-02-15PDF 1.7 MB
Regulatory informationUsers Manual2006-02-15PDF 800.9 KB
User ManualUsers Manual2006-02-15PDF 1.7 MB
Users ManualUsers Manual2006-02-03PDF 3.1 MB
Internal PhotosInternal Photos2007-03-06PDF 478.2 KB
Internal PhotosInternal Photos2006-05-11PDF 154.2 KB
Internal PhotosInternal Photos2006-04-10PDF 160.1 KB
Internal PhotosInternal Photos2006-02-03PDF 152.4 KB
External PhotosExternal Photos2007-03-06PDF 444.7 KB
External PhotosExternal Photos2006-05-11PDF 113.3 KB
External PhotosExternal Photos2006-04-10PDF 94.6 KB
External PhotosExternal Photos2006-02-03PDF 98.9 KB
Label ArtworkID Label/Location Info2007-03-06PDF 69.3 KB
Label and LocationID Label/Location Info2007-03-06PDF 69.3 KB
Board labelID Label/Location Info2006-05-11PDF 69.3 KB
LabelID Label/Location Info2006-05-11PDF 180 KB
Label locationID Label/Location Info2006-05-11PDF 2 MB
Notebook labelID Label/Location Info2006-05-11PDF 596.9 KB
ID label formatID Label/Location Info2006-02-15PDF 710.4 KB
Notebook ID label formatID Label/Location Info2006-02-15PDF 710.4 KB
Label InformationID Label/Location Info2006-02-03PDF 69.3 KB
Test Setup PhotosTest Setup Photos2007-03-06PDF 555.7 KB
Test Setup PhotosTest Setup Photos2006-12-18PDF 174.3 KB
Test Setup PhotosTest Setup Photos2006-05-11PDF 336.5 KB
Test setup photosTest Setup Photos2006-05-11PDF 336.5 KB
Test Setup PhotosTest Setup Photos2006-04-10PDF 198.2 KB
Test PhotosTest Setup Photos2006-02-03PDF 307.6 KB
Test ReportTest Report2007-03-06PDF 645.1 KB
Test ReportTest Report2007-03-06PDF 759.3 KB
Test Report DFSTest Report2007-03-06PDF 510.4 KB
Test ReportTest Report2006-12-18PDF 780.9 KB
MPE EstimateTest Report2006-09-27PDF 110.6 KB
Test report 15 247Test Report2006-05-11PDF 939 KB
Test report 15 407Test Report2006-05-11PDF 645 KB
Test ReportTest Report2006-04-10PDF 624.5 KB
Test ReportTest Report2006-04-10PDF 378.5 KB
Test Report DTS Rev ATest Report2006-02-03PDF 1.3 MB
Test Report PC PeripTest Report2006-02-03PDF 1.4 MB
Test Report UNII Rev CTest Report2006-02-03PDF 736.3 KB
Attestation StatementAttestation Statements2007-05-31PDF 44.7 KB
AttestationAttestation Statements2007-03-06PDF 44.7 KB
Channel AttestationAttestation Statements2007-03-06PDF 253.1 KB
Attestation DFSAttestation Statements2006-12-18PDF 231.6 KB
Attestation StatementAttestation Statements2006-12-18PDF 41.3 KB
Agent AuthorizationAttestation Statements2006-05-11PDF 46.7 KB
Agent authorizationAttestation Statements2006-05-11PDF 46.7 KB
Anti drug letterAttestation Statements2006-05-11PDF 44.7 KB
Channel attestationAttestation Statements2006-05-11PDF 253.1 KB
Letter Anti DrugAttestation Statements2006-05-11PDF 44.7 KB
Attestation StatementsAttestation Statements2006-04-10PDF 253.1 KB
AttestationStatementAttestation Statements2006-04-10PDF 253.1 KB
Channel Operation AttestationAttestation Statements2006-02-03PDF 253.1 KB
Authorization LetterCover Letter(s)2007-07-11PDF 48.2 KB
Class II Permissive Change LetterCover Letter(s)2007-07-11PDF 44.6 KB
Bios Lock LetterCover Letter(s)2007-05-31PDF 96 KB
ConfidentialityCover Letter(s)2007-05-31PDF 44.5 KB
Cover LetterCover Letter(s)2007-05-31PDF 67.9 KB
Authorization LetterCover Letter(s)2007-03-06PDF 47 KB
Cover LetterCover Letter(s)2007-03-06PDF 360.8 KB
Authorization LetterCover Letter(s)2006-12-18PDF 43.1 KB
Permissive Change LetterCover Letter(s)2006-12-18PDF 92 KB
Agency Authorization LetterCover Letter(s)2006-09-27PDF 48.2 KB
Class II permissive change letterCover Letter(s)2006-09-27PDF 40.9 KB
Class II permissive change letterCover Letter(s)2006-09-27PDF 110.6 KB
Application responseCover Letter(s)2006-05-11PDF 40.7 KB
Cover LetterCover Letter(s)2006-05-11PDF 75.1 KB
Cover letterCover Letter(s)2006-05-11PDF 75.1 KB
Authorization LetterCover Letter(s)2006-04-10PDF 46.7 KB
Cover LetterCover Letter(s)2006-04-10PDF 74.8 KB
Agent authorization letterCover Letter(s)2006-02-15PDF 48.2 KB
Authorization letterCover Letter(s)2006-02-15PDF 48.2 KB
Class II permissive change cover letterCover Letter(s)2006-02-15PDF 43.9 KB
Class II permissive cover letterCover Letter(s)2006-02-15PDF 43.9 KB
Agent LetterCover Letter(s)2006-02-03PDF 46.7 KB
Comments and ResponseCover Letter(s)2006-02-03PDF 78.8 KB
Cover LetterCover Letter(s)2006-02-03PDF 74.6 KB
Modular Approval LetterCover Letter(s)2006-02-03PDF 85.3 KB
Antenna WLANParts List/Tune Up Info2007-07-11PDF 2.6 MB
Antenna WWANParts List/Tune Up Info2007-07-11PDF 336.7 KB
Antennan WLANParts List/Tune Up Info2007-07-11PDF 2.6 MB
Antennan WWANParts List/Tune Up Info2007-07-11PDF 336.7 KB
MPERF Exposure Info2007-07-11PDF 82.9 KB
MPERF Exposure Info2007-07-11PDF 38.4 KB
RF Exposure Antenna InfoRF Exposure Info2007-03-06PDF 231.6 KB
RF Exposure MPERF Exposure Info2007-03-06PDF 423 KB
WLAN AntennaParts List/Tune Up Info2006-09-27PDF 290 KB
WWAN AntennaParts List/Tune Up Info2006-09-27PDF 404.8 KB
Antenna InfoRF Exposure Info2006-05-11PDF 340.8 KB
SAR commentsRF Exposure Info2006-05-11PDF 856.9 KB
SAR report 1 of 2RF Exposure Info2006-05-11PDF 3.2 MB
SAR report 2 of 2RF Exposure Info2006-05-11PDF 2.2 MB
Antenna InfoRF Exposure Info2006-04-10PDF 371.7 KB
RF Exposure MPERF Exposure Info2006-04-10PDF 108.7 KB
Antenna specification and locationParts List/Tune Up Info2006-02-15PDF 289.8 KB
MPE EstimateRF Exposure Info2006-02-15PDF 122.1 KB
MPE esitmate on co locationRF Exposure Info2006-02-15PDF 122.1 KB
HP Altima AntennaRF Exposure Info2006-02-03PDF 285.2 KB
Jakarata Antenna InfoRF Exposure Info2006-02-03PDF 285.2 KB
Jakarta AntennaRF Exposure Info2006-02-03PDF 458.8 KB
RF Exposure InfoRF Exposure Info2006-02-03PDF 112.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 68.8 KB
Schematics Metadata onlySchematicsPDF 562.5 KB
Operational Description Metadata onlyOperational DescriptionPDF 269.6 KB

Application Information

Application IDmAc2C+4plQcAycliqjrAeA==
Final Action Date2007-07-11
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0020305058
ModelWM3945ABG
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionIntel PRO/Wireless 3945ABG Network Connection
Responsible PartyDavid P. Adams, Strategist, dadams@hp.com , 650-236-8524
Test FirmThu Chan, Compliance Certification Services, thu.chan@ccsemc.com , 510-771-1122
TCB Emailmike.kuo@ccsemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II permissive change to be co-located with specific WWAN module as documented in the filing. Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

Applications

Application IDDatePurpose
mAc2C+4plQcAycliqjrAeA==2007-07-11Class II permissive change or modification of presently authorized equipment
ZCUJlp8ifco3zlcws2hc2Q==2007-07-11Class II permissive change or modification of presently authorized equipment
v/G1380bh36Pco+eYCG93w==2007-05-31Class II permissive change or modification of presently authorized equipment
SCLEEqOdIQW05c+fnCRsEg==2007-05-31Class II permissive change or modification of presently authorized equipment
uXxoZs6rReISXAbC+tddHg==2007-03-06Class II permissive change or modification of presently authorized equipment
6NPQ3EVV4SDIC9E4l3asdw==2007-03-06Class II permissive change or modification of presently authorized equipment
zLzl9IDkzrUqSJU+qqJ0vQ==2006-12-18Class II permissive change or modification of presently authorized equipment
K13xDWYZpqJ4W2zdp5ZGww==2006-09-27Class II permissive change or modification of presently authorized equipment
2LXoND0B/yWEaD0CdO/G5A==2006-09-27Class II permissive change or modification of presently authorized equipment
TnD/0WdjuXnKu4fqfxBFrg==2006-05-11Class II permissive change or modification of presently authorized equipment
7hcDANfdTk7xroxVxsOfPg==2006-05-11Class II permissive change or modification of presently authorized equipment
icOe9zs+AK0bOZl2P758WQ==2006-04-10Class II permissive change or modification of presently authorized equipment
+ZpQKdfZQ43juFBXpMfaJg==2006-04-10Class II permissive change or modification of presently authorized equipment
J0kiDCtWsQ4GKd927gv9tQ==2006-02-15Class II permissive change or modification of presently authorized equipment
HKX1mkuXhVLmbZbCHwTuDw==2006-02-15Class II permissive change or modification of presently authorized equipment
luminQuxwQB2vOmRwWseoA==2006-02-03Original Equipment
YiQ+LYnjBbuMAqF6Me1PyA==2006-02-03Original Equipment
GQxbdUXChSJ/q2pqHrMf4Q==2006-02-03Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.315CCC
5180-5240 MHz0.04715ECC
5180-5240 MHz0.04515ECC
5260-5320 MHz0.06815ECC
5260-5320 MHz0.06615ECC
5745-5825 MHz0.09515CCC
5745-5825 MHz0.09615CCC

Grants

TCB Grant - Application zLzl9IDkzrUqSJU+qqJ0vQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 12/18/2006

Application Dated: 12/18/2006
HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.047  
CC 15E 5260.0  -  5320.0 0.068  

Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application zLzl9IDkzrUqSJU+qqJ0vQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 12/18/2006

Application Dated: 12/18/2006
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.047  
CC 15E 5260.0  -  5320.0 0.068  

Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application ZCUJlp8ifco3zlcws2hc2Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 07/11/2007

Application Dated: 07/11/2007
HP Inc.
1501 Page Mill Road
Palo Alto, CA 94304
 
Attention: David Adams , Strategist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.047  
CC 15E 5260.0  -  5320.0 0.068  

Class II permissive change to be co-located with specific WWAN module as documented in the filing. Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except those identified under this FCC ID number. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ZCUJlp8ifco3zlcws2hc2Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
1501 Page Mill Road
Palo Alto, CA 94304
United States
  Date of Grant: 07/11/2007

Application Dated: 07/11/2007
 
Attention: David Adams , Strategist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.047  
CC 15E 5260.0  -  5320.0 0.068  

Class II permissive change to be co-located with specific WWAN module as documented in the filing. Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except those identified under this FCC ID number. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA660915

TCB Grant - Application YiQ+LYnjBbuMAqF6Me1PyA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 02/03/2006

Application Dated: 02/03/2006
HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.047  
CC 15E 5260.0  -  5320.0 0.068  

Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application YiQ+LYnjBbuMAqF6Me1PyA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 02/03/2006

Application Dated: 02/03/2006
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.047  
CC 15E 5260.0  -  5320.0 0.068  

Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application v/G1380bh36Pco+eYCG93w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/31/2007

Application Dated: 05/10/2007
Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.047  
CC 15E 5260.0  -  5320.0 0.068  

Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in filings under this FCC ID and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. The final host device must utilize the Bios Locking feature as documented in this filing. Use in portable RF exposure conditions is limited to the specific product and antenna configurations evaluated in filings under this FCC ID. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, other than as described in filings under this FCC ID. End users must be provided with operating instructions for satisfying RF exposure compliance requirements. The highest reported body SAR values per band for this FCC ID are: 2.4 GHz 1.019 W/kg; 5.3 GHz 1.168 W/kg; 5.8 GHz 1.210 W/kg.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application v/G1380bh36Pco+eYCG93w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
United States
  Date of Grant: 05/31/2007

Application Dated: 05/10/2007
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.047  
CC 15E 5260.0  -  5320.0 0.068  

Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in filings under this FCC ID and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. The final host device must utilize the Bios Locking feature as documented in this filing. Use in portable RF exposure conditions is limited to the specific product and antenna configurations evaluated in filings under this FCC ID. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, other than as described in filings under this FCC ID. End users must be provided with operating instructions for satisfying RF exposure compliance requirements. The highest reported body SAR values per band for this FCC ID are: 2.4 GHz 1.019 W/kg; 5.3 GHz 1.168 W/kg; 5.8 GHz 1.210 W/kg.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA445782

TCB Grant - Application uXxoZs6rReISXAbC+tddHg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 03/06/2007

Application Dated: 03/06/2007
Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.047  
CC 15E 5260.0  -  5320.0 0.068  

Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application uXxoZs6rReISXAbC+tddHg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
United States
  Date of Grant: 03/06/2007

Application Dated: 03/06/2007
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.047  
CC 15E 5260.0  -  5320.0 0.068  

Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA942359

TCB Grant - Application TnD/0WdjuXnKu4fqfxBFrg==

This application does not exist.

EAS Grant - Application TnD/0WdjuXnKu4fqfxBFrg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 05/11/2006

Application Dated: 03/22/2006
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.3  
CC 15C 5745.0  -  5825.0 0.096  

Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in filings under this FCC ID and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. Use in portable RF exposure conditions is limited to the specific product and antenna configurations evaluated in filings under this FCC ID. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, other than as described in filings under this FCC ID. End users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. The highest reported body SAR values per band for this FCC ID are: 2.4 GHz 1.019 W/kg; 5.3 GHz 1.168 W/kg; 5.8 GHz 1.210 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application SCLEEqOdIQW05c+fnCRsEg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/31/2007

Application Dated: 05/10/2007
Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Digital Transmission System
Notes: Intel Wireless WiFi Link 4965ABG
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.3  
CC 15C 5745.0  -  5825.0 0.095  

Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in filings under this FCC ID and installed in the manner specified may be used with this device. The final host device must utilize the Bios Locking feature as documented in this filing. Use in portable RF exposure conditions is limited to the specific product and antenna configurations evaluated in filings under this FCC ID. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, other than as described in filings under this FCC ID. End users must be provided with operating instructions for satisfying RF exposure compliance requirements. The highest reported body SAR values per band for this FCC ID are: 2.4 GHz 1.019 W/kg; 5.3 GHz 1.168 W/kg; 5.8 GHz 1.210 W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application SCLEEqOdIQW05c+fnCRsEg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
United States
  Date of Grant: 05/31/2007

Application Dated: 05/10/2007
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Digital Transmission System
Notes: Intel Wireless WiFi Link 4965ABG
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.3  
CC 15C 5745.0  -  5825.0 0.095  

Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in filings under this FCC ID and installed in the manner specified may be used with this device. The final host device must utilize the Bios Locking feature as documented in this filing. Use in portable RF exposure conditions is limited to the specific product and antenna configurations evaluated in filings under this FCC ID. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, other than as described in filings under this FCC ID. End users must be provided with operating instructions for satisfying RF exposure compliance requirements. The highest reported body SAR values per band for this FCC ID are: 2.4 GHz 1.019 W/kg; 5.3 GHz 1.168 W/kg; 5.8 GHz 1.210 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA241309

TCB Grant - Application mAc2C+4plQcAycliqjrAeA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 07/11/2007

Application Dated: 07/11/2007
HP Inc.
1501 Page Mill Road
Palo Alto, CA 94304
 
Attention: David Adams , Strategist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.3  
CC 15C 5745.0  -  5825.0 0.095  

Class II permissive change to be co-located with specific WWAN module as documented in the filing. Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application mAc2C+4plQcAycliqjrAeA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
1501 Page Mill Road
Palo Alto, CA 94304
United States
  Date of Grant: 07/11/2007

Application Dated: 07/11/2007
 
Attention: David Adams , Strategist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.3  
CC 15C 5745.0  -  5825.0 0.095  

Class II permissive change to be co-located with specific WWAN module as documented in the filing. Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA761722

TCB Grant - Application luminQuxwQB2vOmRwWseoA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 02/03/2006

Application Dated: 02/03/2006
HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.3  
CC 15C 5745.0  -  5825.0 0.095  

Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application luminQuxwQB2vOmRwWseoA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 02/03/2006

Application Dated: 02/03/2006
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.3  
CC 15C 5745.0  -  5825.0 0.095  

Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application K13xDWYZpqJ4W2zdp5ZGww==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 09/27/2006

Application Dated: 09/27/2006
HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.3  
CC 15C 5745.0  -  5825.0 0.096  

Class II permissive filing to be co-located with WWAN Module/ID:N7NMC8775-H as mobile device per section 2.1091 of FCC rules. Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in filings under this FCC ID and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. Use in portable RF exposure conditions is limited to the specific product and antenna configurations evaluated in filings under this FCC ID. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, other than as described in filings under this FCC ID. End users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values per band for this FCC ID are: 2.4 GHz 1.019 W/kg; 5.3 GHz 1.168 W/kg; 5.8 GHz 1.210 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application K13xDWYZpqJ4W2zdp5ZGww==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 09/27/2006

Application Dated: 09/27/2006
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.3  
CC 15C 5745.0  -  5825.0 0.096  

Class II permissive filing to be co-located with WWAN Module/ID:N7NMC8775-H as mobile device per section 2.1091 of FCC rules. Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in filings under this FCC ID and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. Use in portable RF exposure conditions is limited to the specific product and antenna configurations evaluated in filings under this FCC ID. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, other than as described in filings under this FCC ID. End users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values per band for this FCC ID are: 2.4 GHz 1.019 W/kg; 5.3 GHz 1.168 W/kg; 5.8 GHz 1.210 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application J0kiDCtWsQ4GKd927gv9tQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 02/15/2006

Application Dated: 02/15/2006
HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.3  
CC 15C 5745.0  -  5825.0 0.095  

Class II permissive change by co-locating WWAN module ( FCC ID:N7N-MC5720) as documented in this filing. Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except those identified under this FCC ID number. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application J0kiDCtWsQ4GKd927gv9tQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 02/15/2006

Application Dated: 02/15/2006
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.3  
CC 15C 5745.0  -  5825.0 0.095  

Class II permissive change by co-locating WWAN module ( FCC ID:N7N-MC5720) as documented in this filing. Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except those identified under this FCC ID number. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application icOe9zs+AK0bOZl2P758WQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 04/10/2006

Application Dated: 04/10/2006
HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.3  
CC 15C 5745.0  -  5825.0 0.095  

Modular Approval. Power Output is Conducted. Approval limited to devices where theantennas are located at least 20cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application icOe9zs+AK0bOZl2P758WQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 04/10/2006

Application Dated: 04/10/2006
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  HP Inc.
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.3  
CC 15C 5745.0  -  5825.0 0.095  

Modular Approval. Power Output is Conducted. Approval limited to devices where theantennas are located at least 20cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application HKX1mkuXhVLmbZbCHwTuDw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 02/15/2006

Application Dated: 02/15/2006
HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.047  
CC 15E 5260.0  -  5320.0 0.068  

Class II permissive change by co-locating WWAN module ( FCC ID:N7N-MC5720) as documented in this filing. Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except those identified under this FCC ID number. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application HKX1mkuXhVLmbZbCHwTuDw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 02/15/2006

Application Dated: 02/15/2006
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.047  
CC 15E 5260.0  -  5320.0 0.068  

Class II permissive change by co-locating WWAN module ( FCC ID:N7N-MC5720) as documented in this filing. Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except those identified under this FCC ID number. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application GQxbdUXChSJ/q2pqHrMf4Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 02/03/2006

Application Dated: 02/03/2006
HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  HP Inc.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 


EAS Grant - Application GQxbdUXChSJ/q2pqHrMf4Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 02/03/2006

Application Dated: 02/03/2006
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  HP Inc.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 



TCB Grant - Application 7hcDANfdTk7xroxVxsOfPg==

This application does not exist.

EAS Grant - Application 7hcDANfdTk7xroxVxsOfPg==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 05/11/2006

Application Dated: 03/22/2006
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.045  
CC 15E 5260.0  -  5320.0 0.066  

Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in filings under this FCC ID and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. Use in portable RF exposure conditions is limited to the specific product and antenna configurations evaluated in filings under this FCC ID. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, other than as described in filings under this FCC ID. End users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements. The highest reported body SAR values per band for this FCC ID are: 2.4 GHz 1.019 W/kg; 5.3 GHz 1.168 W/kg; 5.8 GHz 1.210 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 6NPQ3EVV4SDIC9E4l3asdw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 03/06/2007

Application Dated: 03/06/2007
Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.3  
CC 15C 5745.0  -  5825.0 0.095  

Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 6NPQ3EVV4SDIC9E4l3asdw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hewlett-Packard Company
1501 Page Mill Road
Palo Alto, CA 94304
United States
  Date of Grant: 03/06/2007

Application Dated: 03/06/2007
 
Attention: David Adams , US/Canada Technical Regulations Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  Hewlett-Packard Company
Equipment Class: Digital Transmission System
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.3  
CC 15C 5745.0  -  5825.0 0.095  

Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA780151

TCB Grant - Application 2LXoND0B/yWEaD0CdO/G5A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 09/27/2006

Application Dated: 09/27/2006
HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.045  
CC 15E 5260.0  -  5320.0 0.066  

Class II permissive filing to be co-located with WWAN Module/ID:N7NMC8775-H as mobile device per section 2.1091 of FCC rules. Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in filings under this FCC ID and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. Use in portable RF exposure conditions is limited to the specific product and antenna configurations evaluated in filings under this FCC ID. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, other than as described in filings under this FCC ID. End users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values per band for this FCC ID are: 2.4 GHz 1.019 W/kg; 5.3 GHz 1.168 W/kg; 5.8 GHz 1.210 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 2LXoND0B/yWEaD0CdO/G5A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 09/27/2006

Application Dated: 09/27/2006
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.045  
CC 15E 5260.0  -  5320.0 0.066  

Class II permissive filing to be co-located with WWAN Module/ID:N7NMC8775-H as mobile device per section 2.1091 of FCC rules. Modular Approval. Power Output is Conducted. Approval limited to devices where the antennas are located at least 20 cm from all persons. Only those antennas documented in filings under this FCC ID and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. Use in portable RF exposure conditions is limited to the specific product and antenna configurations evaluated in filings under this FCC ID. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, other than as described in filings under this FCC ID. End users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

The highest reported body SAR values per band for this FCC ID are: 2.4 GHz 1.019 W/kg; 5.3 GHz 1.168 W/kg; 5.8 GHz 1.210 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application +ZpQKdfZQ43juFBXpMfaJg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 04/10/2006

Application Dated: 04/10/2006
HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.047  
CC 15E 5260.0  -  5320.0 0.068  

Modular Approval. Power Output is Conducted. Approval limited todevices where the antennas are located at least 20 cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except those identified under this FCC ID number. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application +ZpQKdfZQ43juFBXpMfaJg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HP Inc.
3390 East Harmony Road
Fort Collins, CO 80528
United States
  Date of Grant: 04/10/2006

Application Dated: 04/10/2006
 
Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B94WM3945ABG
Name of Grantee:  HP Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel PRO/Wireless 3945ABG Network Connection
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.047  
CC 15E 5260.0  -  5320.0 0.068  

Modular Approval. Power Output is Conducted. Approval limited todevices where the antennas are located at least 20 cm from all persons. Only those antennas documented in this filing and installed in the manner specified may be used with this device. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device; all user installation is expressly prohibited. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except those identified under this FCC ID number. End-users and OEM integrators must be provided with operating instructions for satisfying RF exposure compliance requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: