FCC ID B95-NL900S

900 MHz Spread Spectrum Wireless Transceiver

by Raveon Technologies

Grantee Code: B95   Product Code: NL900S
Latest application date: 2011-04-19

FCC ID Device Details

FCC IDB95-NL900S
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeB95
Product CodeNL900S
Applicant BusinessRaveon Technologies 🇺🇸
Related Domains raveon.com
Equipment Class900 MHz Spread Spectrum Wireless Transceiver
Test FirmBay Area Compliance Laboratory

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.75-927.25 MHzChange in identification of presently authorized equipment. Original FCC ID: HSW-DNT900 Grant Date: 12/31/20082011-04-19
903.25-926.25 MHzChange in identification of presently authorized equipment. Original FCC ID: HSW-DNT900 Grant Date: 12/31/20082011-04-19

Exhibits

DocumentTypeAvailableFile
External PhotosExternal Photos2011-04-19PDF 186.7 KB
FCC ID Label InfoID Label/Location Info2011-04-19PDF 74.7 KB
Authorization Letter from Original GranteeCover Letter(s)2011-04-19PDF 44.7 KB
Change in ID Request LetterCover Letter(s)2011-04-19PDF 19.5 KB
Modular Approval LetterCover Letter(s)2011-04-19PDF 43.8 KB
Module Approval LetterCover Letter(s)2011-04-19PDF 43.8 KB

Application Information

Application IDhEZ8hFbbMeSlfs9O16nIjQ==
Final Action Date2011-04-19
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: HSW-DNT900 Grant Date: 12/31/2008
Applicant FRN0003765062
Model-NL900S
Frequency Range902.75-927.25 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device Description900 MHz Spread Spectrum Wireless Transceiver
Responsible PartyJohn Sonnenberg, President, js@raveon.com , 7604445995
Test FirmJohn Chan, Bay Area Compliance Laboratory, bacl.regulatory@baclcorp.com , 408-732-9162
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. The module must transmit with a duty factor not exceeding 28.75%, controlled by firmware and software. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

Applications

Application IDDatePurpose
hEZ8hFbbMeSlfs9O16nIjQ==2011-04-19Change in identification of presently authorized equipment. Original FCC ID: HSW-DNT900 Grant Date: 12/31/2008
YcVzTN46ISFvbw5OUnk42g==2011-04-19Change in identification of presently authorized equipment. Original FCC ID: HSW-DNT900 Grant Date: 12/31/2008

Equipment Authorization

FrequencyOutputRules
902.75-927.25 MHz0.938000015C
903.25-926.25 MHz0.057000015C

Grants

TCB Grant - Application YcVzTN46ISFvbw5OUnk42g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 04/19/2011

Application Dated: 04/19/2011
Raveon Technologies
2461 Impala Drive
Carlsbad, CA 92010
 
Attention: John Sonnenberg , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B95-NL900S
Name of Grantee:  Raveon Technologies
Equipment Class: Digital Transmission System
Notes: 900 MHz Spread Spectrum Wireless Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 903.25  -  926.25 0.057  

Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

EAS Grant - Application YcVzTN46ISFvbw5OUnk42g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Raveon Technologies
2461 Impala Drive
Carlsbad, CA 92010
United States
  Date of Grant: 04/19/2011

Application Dated: 04/19/2011
 
Attention: John Sonnenberg , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B95-NL900S
Name of Grantee:  Raveon Technologies
Equipment Class: Digital Transmission System
Notes: 900 MHz Spread Spectrum Wireless Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 903.25  -  926.25 0.057  

Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.



TCB Grant - Application hEZ8hFbbMeSlfs9O16nIjQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 04/19/2011

Application Dated: 04/19/2011
Raveon Technologies
2461 Impala Drive
Carlsbad, CA 92010
 
Attention: John Sonnenberg , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B95-NL900S
Name of Grantee:  Raveon Technologies
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 900 MHz Spread Spectrum Wireless Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.75  -  927.25 0.938  

Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. The module must transmit with a duty factor not exceeding 28.75%, controlled by firmware and software. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

EAS Grant - Application hEZ8hFbbMeSlfs9O16nIjQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Raveon Technologies
2461 Impala Drive
Carlsbad, CA 92010
United States
  Date of Grant: 04/19/2011

Application Dated: 04/19/2011
 
Attention: John Sonnenberg , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  B95-NL900S
Name of Grantee:  Raveon Technologies
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 900 MHz Spread Spectrum Wireless Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.75  -  927.25 0.938  

Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. The module must transmit with a duty factor not exceeding 28.75%, controlled by firmware and software. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.



Mail To: