FCC ID BBOSC200
Cobra SC 200
by Cobra Electronics Corporation
Grantee Code: BBO Product Code: SC200
Latest application date: 2022-01-24
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-01-24 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-01-24 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2022-01-24 |
| 2402-2480 MHz | Original Equipment | 2020-08-20 |
| 5180-5240 MHz | Original Equipment | 2020-08-20 |
| 2402-2480 MHz | Original Equipment | 2020-08-20 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User_Manual | Users Manual | 2021-02-16 | PDF 1.7 MB |
| User_Munaul | Users Manual | 2021-02-16 | PDF 1.7 MB |
| User_Munaul | Users Manual | 2021-02-16 | PDF 375.1 KB |
| User_manual | Users Manual | 2021-02-16 | PDF 375.1 KB |
| Internal photos | Internal Photos | 2022-01-24 | PDF 795.8 KB |
| Internal_Photos | Internal Photos | 2021-02-16 | PDF 811.8 KB |
| Internal_photos | Internal Photos | 2021-02-16 | PDF 811.8 KB |
| External photos | External Photos | 2022-01-24 | PDF 693.2 KB |
| Ext_Photos | External Photos | 2021-02-16 | PDF 701.3 KB |
| External_Photos | External Photos | 2021-02-16 | PDF 701.3 KB |
| External_photos | External Photos | 2021-02-16 | PDF 701.3 KB |
| Label | ID Label/Location Info | 2020-08-20 | PDF 146.8 KB |
| Label and Label Location | ID Label/Location Info | 2020-08-20 | PDF 145.2 KB |
| label | ID Label/Location Info | 2020-08-20 | PDF 146.8 KB |
| Test setup | Test Setup Photos | 2022-01-24 | PDF 285.7 KB |
| Test_Setup_Photos | Test Setup Photos | 2021-02-16 | PDF 300 KB |
| Test report | Test Report | 2022-01-24 | PDF 985.8 KB |
| Test report | Test Report | 2022-01-24 | PDF 1.4 MB |
| Test report | Test Report | 2022-01-24 | PDF 1.8 MB |
| CHTEW20080034-FCC Part 15.247 WIFI-2.4G -SISO | Test Report | 2020-08-20 | PDF 3.1 MB |
| CHTEW20080035-FCC Part 15.247 BLE V02 | Test Report | 2020-08-20 | PDF 1.3 MB |
| CHTEW20080036-FCC Part 15.247 EDR V02 | Test Report | 2020-08-20 | PDF 4.4 MB |
| CHTEW20080037-FCC Part 15.407-WIFI 5G -B1 B2 B3 B4a n ac SISO | Test Report | 2020-08-20 | PDF 1.2 MB |
| CHTEW20080037-FCC Part 15.407-WIFI 5G -B1 B2 B3 B4a n ac SISO-Appendix_Part1 | Test Report | 2020-08-20 | PDF 6 MB |
| CHTEW20080037-FCC Part 15.407-WIFI 5G -B1 B2 B3 B4a n ac SISO-Appendix_Part2 | Test Report | 2020-08-20 | PDF 4.6 MB |
| CHTEW20080038-FCC Part 15.407-WIFI 5G -DFS Slave without radar detector | Test Report | 2020-08-20 | PDF 1 MB |
| Cover Letter | Cover Letter(s) | 2022-01-24 | PDF 145.7 KB |
| Cover letter | Cover Letter(s) | 2022-01-24 | PDF 300.8 KB |
| DifferencesDeclarationLetter | Cover Letter(s) | 2020-08-20 | PDF 7.3 KB |
| FCC Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 2020-08-20 | PDF 73.2 KB |
| FCC Software Configuration Control Declaration | Cover Letter(s) | 2020-08-20 | PDF 107.6 KB |
| FCC_Long_Term_Only_Confidentiality | Cover Letter(s) | 2020-08-20 | PDF 73.2 KB |
| FCC_Short_&_Long_Term_Confidentiality_Request | Cover Letter(s) | 2020-08-20 | PDF 73.2 KB |
| Letter_of_Authorization | Cover Letter(s) | 2020-08-20 | PDF 53.7 KB |
| MPE | RF Exposure Info | 2020-08-20 | PDF 118.6 KB |
| Block Diagram Metadata only | Block Diagram | PDF 39.9 KB | |
| Block_diagram Metadata only | Block Diagram | PDF 39.9 KB | |
| SCH Metadata only | Schematics | PDF 438.1 KB | |
| Schematic Metadata only | Schematics | PDF 438.1 KB | |
| Operation Description Metadata only | Operational Description | PDF 260.2 KB | |
| Operational Description Metadata only | Operational Description | PDF 260.2 KB | |
| operation_description Metadata only | Operational Description | PDF 260.2 KB | |
| SOFTWARESECURITYREQUIREMENTSFORU-NIIDEVICES 5G Metadata only | SDR Software/Security Inf | PDF 631.1 KB |
Application Information
| Application ID | Z9RCc8Oj/W3ObmsMeS8f3g== |
|---|---|
| Final Action Date | 2022-01-24 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0004374997 |
| Model | SC200 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Cobra SC 200 |
| Responsible Party | Chris de Waal, Senior Project Engineer, CDewaal@cobra.com |
| Test Firm | Jason Liu, Shenzhen Huatongwei International Inspection Co.,, quality@szhtw.com.cn |
| TCB Email | stuart.beck@nemko.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II permissive change. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Z9RCc8Oj/W3ObmsMeS8f3g== | 2022-01-24 | Class II permissive change or modification of presently authorized equipment |
| LLsc3e5H5fbuYK9DaZBVQQ== | 2022-01-24 | Class II permissive change or modification of presently authorized equipment |
| HOfx6HrFpzW2qBezLcYlEQ== | 2022-01-24 | Class II permissive change or modification of presently authorized equipment |
| vSnBXdP3I0QikwjxqiBM5Q== | 2020-08-20 | Original Equipment |
| Aa0mDy2e0QIjLbHKI0aIkg== | 2020-08-20 | Original Equipment |
| 4I/L26tKOu08W48gD1/V3Q== | 2020-08-20 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application Z9RCc8Oj/W3ObmsMeS8f3g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 01/24/2022 Application Dated: 01/24/2022 |
| Cobra Electronics Corporation |
| 6500 West Cortland Street |
| Chicago, IL 60707 |
| Attention: Chris de Waal , Senior Project Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BBOSC200 |
| Name of Grantee: | Cobra Electronics Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Cobra SC 200 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0036 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0245 |
| Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II permissive change. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Z9RCc8Oj/W3ObmsMeS8f3g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cobra Electronics Corporation 6500 West Cortland Street Chicago, IL 60707 United States |
Date of Grant: 01/24/2022 Application Dated: 01/24/2022 |
| Attention: Chris de Waal , Senior Project Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BBOSC200 |
| Name of Grantee: | Cobra Electronics Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Cobra SC 200 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0036 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0245 |
| Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II permissive change. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 08/20/2020 Application Dated: 08/20/2020 |
| Cobra Electronics Corporation |
| 6500 West Cortland Street |
| Chicago, IL 60707 |
| Attention: Chris de Waal , Senior Project Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BBOSC200 |
| Name of Grantee: | Cobra Electronics Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Cobra SC 200 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0012 |
| Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application vSnBXdP3I0QikwjxqiBM5Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cobra Electronics Corporation 6500 West Cortland Street Chicago, IL 60707 United States |
Date of Grant: 08/20/2020 Application Dated: 08/20/2020 |
| Attention: Chris de Waal , Senior Project Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BBOSC200 |
| Name of Grantee: | Cobra Electronics Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Cobra SC 200 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0012 |
| Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 01/24/2022 Application Dated: 01/24/2022 |
| Cobra Electronics Corporation |
| 6500 West Cortland Street |
| Chicago, IL 60707 |
| Attention: Chris de Waal , Senior Project Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BBOSC200 |
| Name of Grantee: | Cobra Electronics Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Cobra SC 200 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0012 |
| Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II permissive change. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application LLsc3e5H5fbuYK9DaZBVQQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cobra Electronics Corporation 6500 West Cortland Street Chicago, IL 60707 United States |
Date of Grant: 01/24/2022 Application Dated: 01/24/2022 |
| Attention: Chris de Waal , Senior Project Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BBOSC200 |
| Name of Grantee: | Cobra Electronics Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Cobra SC 200 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0012 |
| Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II permissive change. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 01/24/2022 Application Dated: 01/24/2022 |
| Cobra Electronics Corporation |
| 6500 West Cortland Street |
| Chicago, IL 60707 |
| Attention: Chris de Waal , Senior Project Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BBOSC200 |
| Name of Grantee: | Cobra Electronics Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cobra SC 200 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0372 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.0328 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.0365 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0476 |
| Power listed is the maximum conducted output power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II permissive change. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application HOfx6HrFpzW2qBezLcYlEQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cobra Electronics Corporation 6500 West Cortland Street Chicago, IL 60707 United States |
Date of Grant: 01/24/2022 Application Dated: 01/24/2022 |
| Attention: Chris de Waal , Senior Project Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BBOSC200 |
| Name of Grantee: | Cobra Electronics Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cobra SC 200 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0372 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.0328 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.0365 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0476 |
| Power listed is the maximum conducted output power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II permissive change. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 08/20/2020 Application Dated: 08/20/2020 |
| Cobra Electronics Corporation |
| 6500 West Cortland Street |
| Chicago, IL 60707 |
| Attention: Chris de Waal , Senior Project Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BBOSC200 |
| Name of Grantee: | Cobra Electronics Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cobra SC 200 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0372 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.0328 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.0365 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0476 |
| Power listed is the maximum conducted output power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application Aa0mDy2e0QIjLbHKI0aIkg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cobra Electronics Corporation 6500 West Cortland Street Chicago, IL 60707 United States |
Date of Grant: 08/20/2020 Application Dated: 08/20/2020 |
| Attention: Chris de Waal , Senior Project Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BBOSC200 |
| Name of Grantee: | Cobra Electronics Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Cobra SC 200 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0372 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.0328 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.0365 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0476 |
| Power listed is the maximum conducted output power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 08/20/2020 Application Dated: 08/20/2020 |
| Cobra Electronics Corporation |
| 6500 West Cortland Street |
| Chicago, IL 60707 |
| Attention: Chris de Waal , Senior Project Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BBOSC200 |
| Name of Grantee: | Cobra Electronics Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Cobra SC 200 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0036 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0245 |
| Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 4I/L26tKOu08W48gD1/V3Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cobra Electronics Corporation 6500 West Cortland Street Chicago, IL 60707 United States |
Date of Grant: 08/20/2020 Application Dated: 08/20/2020 |
| Attention: Chris de Waal , Senior Project Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BBOSC200 |
| Name of Grantee: | Cobra Electronics Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Cobra SC 200 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0036 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0245 |
| Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |