FCC ID BCG-E3994A

For satisfying FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. The highest reported SAR for the head, body-worn accessory, wireless router (hotspot), and simultaneous transmission exposure conditions are 1.18 W/kg, 0.75 W/kg, 0.86 W/kg, and 1.43 W/kg, respectively.

For satisfying FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. The highest reported SAR for the head, body-worn accessory, wireless router (hotspot), and simultaneous transmission exposure conditions are 1.18 W/kg, 0.75 W/kg, 0.86 W/kg, and 1.43 W/kg, respectively.

This device supports single channel bandwidths of 50MHz and 100 MHz and supports both single-and dual-carrier operations in bands n258, n261 and n260. Powers listed are the highest EIRP and widest bandwidth across both single-and dual-carrier operations. This device supports 2x2 MIMO.

RF exposure compliance for body-worn operations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure.

This device supports single channel bandwidths of 50MHz and 100 MHz and supports both single-and dual-carrier operations in bands n258, n261 and n260. Powers listed are the highest EIRP and widest bandwidth across both single-and dual-carrier operations. This device supports 2x2 MIMO.

RF exposure compliance for body-worn operations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure.

This device supports the following LTE bands and channel bandwidths: Band 5 and Band 26 (1.4/3/5/10 MHz). This device supports 5G NR band and channel bandwidths: n5 (5/10/15/20 MHz). For LTE/5G NR, the line entries are the highest measured total power and widest bandwidth within each band for each emissions designator (G7D for QPSK, W7D for QAM) for single carrier LTE/5GNR operations. In addition, this device supports Carrier Aggregation in the Uplink in Band 5 with maximum aggregate bandwidths of 20 MHz (10+10). In addition, the listing includes the widest bandwidth for each band that supports intra-band and inter-band carrier aggregation.

This device contains functions that are not operational in the U.S. and its Territories; filings under this FCC ID are approved only for US operations.

For satisfying FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. The highest reported SAR for the head, body-worn accessory, wireless router (hotspot), and simultaneous transmission exposure conditions are 0.96 W/kg, 0.96 W/kg, 0.96 W/kg, and 1.46 W/kg, respectively.

HAC Rating: M3/T4-2011. T-coil 5G sub 6 bands appraised as equivalent LTE connections.

This device supports the following LTE bands and channel bandwidths: Band 5 and Band 26 (1.4/3/5/10 MHz). This device supports 5G NR band and channel bandwidths: n5 (5/10/15/20 MHz). For LTE/5G NR, the line entries are the highest measured total power and widest bandwidth within each band for each emissions designator (G7D for QPSK, W7D for QAM) for single carrier LTE/5GNR operations. In addition, this device supports Carrier Aggregation in the Uplink in Band 5 with maximum aggregate bandwidths of 20 MHz (10+10). In addition, the listing includes the widest bandwidth for each band that supports intra-band and inter-band carrier aggregation.

This device contains functions that are not operational in the U.S. and its Territories; filings under this FCC ID are approved only for US operations.

For satisfying FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. The highest reported SAR for the head, body-worn accessory, wireless router (hotspot), and simultaneous transmission exposure conditions are 0.96 W/kg, 0.96 W/kg, 0.96 W/kg, and 1.46 W/kg, respectively.

HAC Rating: M3/T4-2011. T-coil 5G sub 6 bands appraised as equivalent LTE connections.

This device supports LTE Bandwidths of 5/10/15/20 MHz and Carrier Aggregation in the Uplink with the maximum aggregate bandwidth of 40 MHz (20+20). Power listed is the widest bandwidth and highest total power for each emission designator (QPSK, QAM) for single carrier operations and the widest total bandwidth for carrier aggregation operations.

This device contains functions that are not operational in U.S. and its Territories; filings under this FCC ID are approved only for U.S. operations.

To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for the head, body-worn accessory, wireless router (hotspot), and simultaneous transmission exposure conditions are 0.96 W/kg, 0.96 W/kg, 0.96 W/kg, and 1.46 W/kg, respectively.

HAC Rating: M3/T4-2011.

This device supports LTE Bandwidths of 5/10/15/20 MHz and Carrier Aggregation in the Uplink with the maximum aggregate bandwidth of 40 MHz (20+20). Power listed is the widest bandwidth and highest total power for each emission designator (QPSK, QAM) for single carrier operations and the widest total bandwidth for carrier aggregation operations.

This device contains functions that are not operational in U.S. and its Territories; filings under this FCC ID are approved only for U.S. operations.

To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for the head, body-worn accessory, wireless router (hotspot), and simultaneous transmission exposure conditions are 0.96 W/kg, 0.96 W/kg, 0.96 W/kg, and 1.46 W/kg, respectively.

HAC Rating: M3/T4-2011.

This device supports 20 MHz operations and contains functions that are not operational in U.S. and its Territories; filings under this FCC ID are approved only for US operations.

For satisfying FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. The highest reported SAR for the head, body-worn accessory, wireless router (hotspot), and simultaneous transmission exposure conditions are 1.19 W/kg, 0.82 W/kg, 1.05 W/kg, and 1.46 W/kg, respectively.

This device supports 20 MHz operations and contains functions that are not operational in U.S. and its Territories; filings under this FCC ID are approved only for US operations.

For satisfying FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. The highest reported SAR for the head, body-worn accessory, wireless router (hotspot), and simultaneous transmission exposure conditions are 1.19 W/kg, 0.82 W/kg, 1.05 W/kg, and 1.46 W/kg, respectively.

Output power listed is ERP for operations below 1 GHz, and EIRP for operations above 1 GHz.

This device supports the following LTE bands and channel bandwidths for equipment codes PCE and TNE: 5/10 MHz in Band 13, Band 14, Band 17, Band 30; 5/10/15/20 MHz in Band 7, Band 41, Band 48, Band 71; 1.4/3/5/10 MHz in Band 5, Band 12, Band 26; 1.4/3/5/10/15/20 MHz in Band 2, Band 4, Band 25, Band 66. This device supports the following 5GNR bands and channel bandwidths: 10/15/20/30/40/50/60/70/80/90/100 MHz in n77 (Part 27.5(m) 3.7 GHz sub-band and 27.5(o) 3.5 GHz sub-band); 20/30/40/50/60/70/80/90/100 MHz in Bands n41; 5/10/15/20/25/30/40 MHz in bands n7, n25; 5/10/15/20/30/40 MHz in bands n66; 5/10/15/20 MHz in bands n2, n5, n71; 5/10/15 MHz in bands n12, n70; 5/10 MHz in bands n14, n26, n30; 10 MHz in band n53.

This device supports inter-band and intra-band uplink carrier aggregation. For LTE / 5GNR the line entries are the highest measured total power and widest bandwidth within each band for each emissions designator (G7W for BPSK/QPSK, D7W for QAM) across intra-band carrier aggregation, 5GNR/LTE intra-band multi-carrier and single LTE and 5GNR carrier operations.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 0.95 W/kg, 0.95 W/kg, 0.95W/kg, and 1.49 W/kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

This device contains functions that are not operational in U.S. Territories; filings under this FCC ID are approved only for U.S. operations.

HAC Rating M3 / T4 - 2011. T-coil 5G sub 6 bands appraised as equivalent LTE connections.

This device supports 20 MHz, 40 MHz and 80 MHz operations in the 5 GHz band. This device contains functions that are not operational in U.S. and its Territories; filings under this FCC ID are approved only for US operations.

For satisfying FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. The highest reported SAR for the head, body-worn accessory, wireless router (hotspot), and simultaneous transmission exposure conditions are 1.13 W/kg, 1.14 W/kg, 1.14 W/kg, 1.43 W/kg, respectively.

HAC Rating: M3/T4-2011

This device supports 20 MHz, 40 MHz and 80 MHz operations in the 5 GHz band. This device contains functions that are not operational in U.S. and its Territories; filings under this FCC ID are approved only for US operations.

For satisfying FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. The highest reported SAR for the head, body-worn accessory, wireless router (hotspot), and simultaneous transmission exposure conditions are 1.13 W/kg, 1.14 W/kg, 1.14 W/kg, 1.43 W/kg, respectively.

HAC Rating: M3/T4-2011

Output power listed is EIRP.

This device supports LTE bandwidths of 5/10/15/20 MHz and Carrier Aggregation in the Uplink with the maximum aggregate bandwidth of 40 MHz (20+20). This device supports 5GNR band and channel bandwidths: 10/20/30/40 MHz. The line entries are the highest measured total power and widest bandwidth within each band for each emissions designator for single channel and multi-channel operations.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 0.75 W/kg, 0.94 W/kg, 0.94 W/kg, and 1.41 W/kg, respectively. The highest reported SAR values across all filings for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 0.96 W/kg, 0.96 W/kg, 0.96 W/kg, and 1.46 W/kg, respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

This device contains functions that are not operational in U.S. Territories; filings under this FCC ID are approved only for U.S. operations.

HAC Rating M3 / T4 - 2011. T-coil 5G sub 6 bands appraised as equivalent LTE connections.

Output power listed is EIRP.

This device supports LTE bandwidths of 5/10/15/20 MHz and Carrier Aggregation in the Uplink with the maximum aggregate bandwidth of 40 MHz (20+20). This device supports 5GNR band and channel bandwidths: 10/20/30/40 MHz. The line entries are the highest measured total power and widest bandwidth within each band for each emissions designator for single channel and multi-channel operations.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 0.75 W/kg, 0.94 W/kg, 0.94 W/kg, and 1.41 W/kg, respectively. The highest reported SAR values across all filings for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 0.96 W/kg, 0.96 W/kg, 0.96 W/kg, and 1.46 W/kg, respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

This device contains functions that are not operational in U.S. Territories; filings under this FCC ID are approved only for U.S. operations.

HAC Rating M3 / T4 - 2011. T-coil 5G sub 6 bands appraised as equivalent LTE connections.

This device supports the following LTE bands and channel bandwidths: Band 13, Band 14, Band 17, and Band 30 (5/10 MHz); Band 7, Band 38, Band 41, and Band 71 (5/10/15/20 MHz); Band 12 (1.4/3/5/10 MHz); Band 2, Band 4, Band 25, and Band 66 (1.4/3/5/10/15/20 MHz ). This device supports 5G NR bands and channel bandwidths: n30 (5/10MHz); n12 (5/10/15 MHz); n2 and n71 (5/10/15/20 MHz); n66 (5/10/15/20/30/40 MHz); n7 and n25 (5/10/15/20/25/30/40 MHz); n41 (20/30/40/50/60/80/90/100 MHz); n77 (20/30/40/50/60/70/80/90/100 MHz). For LTE/5GNR the line entries are the highest measured total power and widest bandwidth within each band for each emissions designator (G7D for QPSK, W7D for QAM) for single carrier LTE/5GNR operations. In addition, this device supports Carrier Aggregation in the Uplink in Bands 7, 41, and 66 with maximum aggregate bandwidths of 40 MHz (20+20).

This device contains functions that are not operational in the U.S. and its Territories; filings under this FCC ID are approved only for US operations.

For satisfying FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. The highest reported SAR for the head, body-worn accessory, wireless router (hotspot), and simultaneous transmission exposure conditions are 0.96 W/kg, 0.96 W/kg, 0.96 W/kg, and 1.46 W/kg, respectively.

HAC Rating: M3/T4-2011. T-coil 5G sub 6 bands appraised as equivalent LTE connections.