FCC ID BCG-E8148A

Output power listed is conducted power for Part 90S (814-824 MHz), ERP for all other operations below 1 GHz, and EIRP for operations above 1 GHz.

This device supports the following LTE bands and channel bandwidths: 5/10 MHz in Band 13, Band 17, Band 30; 5/10/15/20 MHz in Band 7, Band 41, Band 48; 1.4/3/5/10 MHz in Band 5, Band 12, Band 26; 1.4/3/5/10/15/20 MHz in Band 2, Band 4, Band 25, Band 66. This device supports the following 5GNR bands and channel bandwidths: 10/15/20/30/40/50/60/70/80/90/100 MHz in n77 (Part 27.5(m) 3.7 GHz sub-band and 27.5(o) 3.5 GHz sub-band); 20/30/40/50/60/70/80/90/100 MHz in Bands n41; 5/10/15/20/25/30/40 MHz in bands n7, n25; 5/10/15/20/30/40 MHz in bands n66; 5/10/15/20 MHz in bands n2, n5; 5/10/15 MHz in bands n12, n70; 5/10 MHz in bands n26, n30.

This device supports inter-band and intra-band uplink carrier aggregation. For LTE / 5GNR the line entries are the highest measured total power and widest bandwidth within each band for each emissions designator (G7W for BPSK/QPSK, D7W for QAM) across intra-band carrier aggregation, 5GNR/LTE intra-band multi-carrier and single LTE and 5GNR carrier operations.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 0.95 W/kg, 0.94 W/kg, 0.95W/kg, and 1.58 W/kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying R.F. exposure compliance.

This device contains functions that are not operational in U.S. Territories; filings under this FCC ID are approved only for U.S. operations.

HAC Rating M3 / T4 - 2011. T-coil 5G sub 6 bands appraised as equivalent LTE connections.

Output power listed is conducted power for Part 90S (814-824 MHz), ERP for all other operations below 1 GHz, and EIRP for operations above 1 GHz.

This device supports the following LTE bands and channel bandwidths: 5/10 MHz in Band 13, Band 17, Band 30; 5/10/15/20 MHz in Band 7, Band 41, Band 48; 1.4/3/5/10 MHz in Band 5, Band 12, Band 26; 1.4/3/5/10/15/20 MHz in Band 2, Band 4, Band 25, Band 66. This device supports the following 5GNR bands and channel bandwidths: 10/15/20/30/40/50/60/70/80/90/100 MHz in n77 (Part 27.5(m) 3.7 GHz sub-band and 27.5(o) 3.5 GHz sub-band); 20/30/40/50/60/70/80/90/100 MHz in Bands n41; 5/10/15/20/25/30/40 MHz in bands n7, n25; 5/10/15/20/30/40 MHz in bands n66; 5/10/15/20 MHz in bands n2, n5; 5/10/15 MHz in bands n12, n70; 5/10 MHz in bands n26, n30.

This device supports inter-band and intra-band uplink carrier aggregation. For LTE / 5GNR the line entries are the highest measured total power and widest bandwidth within each band for each emissions designator (G7W for BPSK/QPSK, D7W for QAM) across intra-band carrier aggregation, 5GNR/LTE intra-band multi-carrier and single LTE and 5GNR carrier operations.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 0.95 W/kg, 0.94 W/kg, 0.95W/kg, and 1.58 W/kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying R.F. exposure compliance.

This device contains functions that are not operational in U.S. Territories; filings under this FCC ID are approved only for U.S. operations.

HAC Rating M3 / T4 - 2011. T-coil 5G sub 6 bands appraised as equivalent LTE connections.

This device supports the following LTE bands and channel bandwidths: 5/10 MHz in Band 13, Band 17, Band 30; 5/10/15/20 MHz in Band 7, Band 41, Band 48; 1.4/3/5/10 MHz in Band 5, Band 12, Band 26; 1.4/3/5/10/15/20 MHz in Band 2, Band 4, Band 25, Band 66. This device supports the following 5GNR bands and channel bandwidths: 10/15/20/30/40/50/60/70/80/90/100 MHz in n77 (Part 27.5(m) 3.7 GHz sub-band and 27.5(o) 3.5 GHz sub-band); 20/30/40/50/60/70/80/90/100 MHz in Bands n41; 5/10/15/20/25/30/40 MHz in bands n7, n25; 5/10/15/20/30/40 MHz in bands n66; 5/10/15/20 MHz in bands n2, n5; 5/10/15 MHz in bands n12, n70; 5/10 MHz in bands n26, n30.

This device supports inter-band and intra-band uplink carrier aggregation. For LTE / 5GNR the line entries are the highest measured total power and widest bandwidth within each band for each emissions designator (G7D for BPSK/QPSK, W7D for QAM) across intra-band carrier aggregation, 5GNR/LTE intra-band multi-carrier and single LTE and 5GNR carrier operations.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 0.95 W/kg, 0.94 W/kg, 0.95 W/kg, and 1.58 W/kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying R.F. exposure compliance.

HAC Rating M3 / T4 - 2011. T-coil 5G sub 6 bands appraised as equivalent LTE connections.

This device supports the following LTE bands and channel bandwidths: 5/10 MHz in Band 13, Band 17, Band 30; 5/10/15/20 MHz in Band 7, Band 41, Band 48; 1.4/3/5/10 MHz in Band 5, Band 12, Band 26; 1.4/3/5/10/15/20 MHz in Band 2, Band 4, Band 25, Band 66. This device supports the following 5GNR bands and channel bandwidths: 10/15/20/30/40/50/60/70/80/90/100 MHz in n77 (Part 27.5(m) 3.7 GHz sub-band and 27.5(o) 3.5 GHz sub-band); 20/30/40/50/60/70/80/90/100 MHz in Bands n41; 5/10/15/20/25/30/40 MHz in bands n7, n25; 5/10/15/20/30/40 MHz in bands n66; 5/10/15/20 MHz in bands n2, n5; 5/10/15 MHz in bands n12, n70; 5/10 MHz in bands n26, n30.

This device supports inter-band and intra-band uplink carrier aggregation. For LTE / 5GNR the line entries are the highest measured total power and widest bandwidth within each band for each emissions designator (G7D for BPSK/QPSK, W7D for QAM) across intra-band carrier aggregation, 5GNR/LTE intra-band multi-carrier and single LTE and 5GNR carrier operations.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 0.95 W/kg, 0.94 W/kg, 0.95 W/kg, and 1.58 W/kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying R.F. exposure compliance.

HAC Rating M3 / T4 - 2011. T-coil 5G sub 6 bands appraised as equivalent LTE connections.

Output power listed is EIRP. This device supports LTE bandwidths of 5/10/15/20 MHz in Band 48. This device supports 5GNR band and channel bandwidths: 10/20/30/40 MHz in n48. The line entries are the highest measured total power and widest bandwidth within each band for each emissions designator for single channel and multi-channel operations.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 0.84 W/kg, 0.76 W/kg, 0.91 W/kg, and 1.32 W/kg, respectively. The highest reported SAR values across all filings for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 0.94 W/kg, 0.90 W/kg, 0.93 W/kg, and 1.45 W/kg, respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

This device contains functions that are not operational in U.S. Territories; filings under this FCC ID are approved only for U.S. operations.

HAC Rating M3 / T4 - 2011. T-coil 5G sub 6 bands appraised as equivalent LTE connections.

Output power listed is EIRP. This device supports LTE bandwidths of 5/10/15/20 MHz in Band 48. This device supports 5GNR band and channel bandwidths: 10/20/30/40 MHz in n48. The line entries are the highest measured total power and widest bandwidth within each band for each emissions designator for single channel and multi-channel operations.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 0.84 W/kg, 0.76 W/kg, 0.91 W/kg, and 1.32 W/kg, respectively. The highest reported SAR values across all filings for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 0.94 W/kg, 0.90 W/kg, 0.93 W/kg, and 1.45 W/kg, respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

This device contains functions that are not operational in U.S. Territories; filings under this FCC ID are approved only for U.S. operations.

HAC Rating M3 / T4 - 2011. T-coil 5G sub 6 bands appraised as equivalent LTE connections.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 0.94 W/kg, 0.90 W/kg, 0.93 W/kg, and 1.45 W/kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying R.F. exposure compliance.

This device contains functions that are not operational in U.S. Territories; filings under this FCC ID are approved only for U.S. operations.

HAC Rating M3 / T4 - 2011.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 0.94 W/kg, 0.90 W/kg, 0.93 W/kg, and 1.45 W/kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying R.F. exposure compliance.

This device contains functions that are not operational in U.S. Territories; filings under this FCC ID are approved only for U.S. operations.

HAC Rating M3 / T4 - 2011.

This device supports 20 MHz channel bandwidth for 802.11g/n/ac/ax.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 1.08 W/kg, 0.80 W/kg, 1.09 W/kg, and 1.58 W/kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying R.F. exposure compliance.

HAC Rating M3 / T4 - 2011.

This device supports 20 MHz channel bandwidth for 802.11g/n/ac/ax.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 1.08 W/kg, 0.80 W/kg, 1.09 W/kg, and 1.58 W/kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying R.F. exposure compliance.

HAC Rating M3 / T4 - 2011.

This device supports 20 MHz, 40 MHz and 80 MHz channel bandwidth for 802.11n/ac/ax.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 1.14 W/kg, 1.15 W/kg, 1.15 W/kg, and 1.48 W/kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying R.F. exposure compliance.

HAC Rating M3 / T4 - 2011.

This device supports 20 MHz, 40 MHz and 80 MHz channel bandwidth for 802.11n/ac/ax.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 1.14 W/kg, 1.15 W/kg, 1.15 W/kg, and 1.48 W/kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying R.F. exposure compliance.

HAC Rating M3 / T4 - 2011.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 0.82 W/kg, 0.57 W/kg, 0.91 W/kg, and 1.48 W/kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 0.82 W/kg, 0.57 W/kg, 0.91 W/kg, and 1.48 W/kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.