FCC ID BCG-E9194A

This device supports the following LTE bands and channel bandwidths: 5/10 MHz in bands 13, 17, and 30; 5/10/15/20 MHz in bands 7 and 41; 1.4/3/5/10 MHz in bands 5, 12, and 26; 1.4/3/5/10/15/20 MHz in bands 2, 4, 25, and 66.

This device supports the following 5GNR bands and channel bandwidths: 10, 15, 20, 25, 30, 35, 40, 45, 50, 60, 70, 80, 90, 100 MHz in band n41; 10, 15, 20, 30, 40, 50, 60, 70, 80, 90, 100 MHz in band n77 (Part 27.5(o) and 27.5(m)); 5, 10, 15, 20, 25, 30, 35, 40, 50 MHz in band n7; 5, 10, 15, 20, 25, 30, 35, 40 MHz in bands n2, n25; 5, 10, 15, 20, 25, 30, 35, 40, 45 MHz in band n66; 5, 10, 15, 20 MHz in bands n5, n26; 5, 10, 15 MHz in band n12, n70; 5, 10 in band n30.

This device supports inter-band and intra-band uplink carrier aggregation and uplink MIMO.

For LTE / 5GNR the line entries are the highest measured total power and widest bandwidth within each band for each emissions designator for single carrier LTE / 5GNR operations within each band. In addition, the listing includes the highest measured total power and widest bandwidth for each band across intra-band carrier aggregation and 5GNR/LTE intra-band multi-carrier carrier operations.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 1.19 W/kg, 1.19 W/kg, 1.19 W/kg and 1.59 W/Kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

This device contains functions that are not operational in U.S. Territories; filings under this FCC ID are approved only for U.S. operations.

Data referencing is based on reference model FCC ID: BCG-E9186A.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 1.08 W/kg, 1.11 W/kg, 1.11 W/kg, and 1.59 W/kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

Data referencing is based on reference model FCC ID: BCG-E9186A.

This device supports LTE channel bandwidths of 5/10/15/20 MHz and 5GNR bandwidths of 10/15/20/30/40 MHz. UL MIMO is supported in band n48.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 1.18 W/kg, 1.12 W/kg, 1.12 W/kg, and 1.59 W/kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

Data referencing is based on reference model FCC ID: BCG-E9186A.

This device supports 20 MHz, 40 MHz, 80 MHz and 160 MHz channel bandwidths for 802.11 operations. It also supports narrowband UNII with bandwidths of 1 MHz, 2 MHz, 4 MHz and 8 MHz in UNII bands 1 and 3 and 802.15.4ab in UNII-3.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 0.92 W/kg, 1.17 W/kg, 1.17 W/kg, and 1.59 W/kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

Data referencing is based on reference model FCC ID: BCG-E9186A.

This device supports 20 MHz channel bandwidth for 802.11; 1MHz, 2MHz and 4MHz bandwidths for Bluetooth. It also supports 802.15.4.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 1.16 W/kg, 1.17 W/kg, 1.17 W/kg, and 1.59 W/kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

Data referencing is based on reference model FCC ID: BCG-E9186A.

This device supports 20 MHz, 40 MHz, 80 MHz and 160 MHz channel bandwidths for 802.11. It also supports narrowband UNII with bandwidths of 1 MHz, 2 MHz, 4 MHz and 8 MHz in UNII band 5.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 0.62 W/kg, 1.06 W/kg, 1.06 W/kg and 1.59 W/kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

Data referencing is based on reference model FCC ID: BCG-E9186A.

This device supports 20 MHz, 40 MHz, 80 MHz and 160 MHz channel bandwidths.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 0.62 W/kg, 1.06 W/kg, 1.06 W/kg and 1.59 W/kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

Data referencing is based on reference model FCC ID: BCG-E9186A.

Data referencing is based on reference model FCC ID: BCG-E9186A.

Data referencing is based on reference model FCC ID: BCG- E9186A.