1938 Bluetooth Mouse User Manual LL2365.book Apple Inc.
Apple Inc. Bluetooth Mouse
LL2365.book Page 1 Tuesday, July 8, 2003 7:19 PM Apple Wireless Mouse User’s Guide LL2365.book Page 2 Tuesday, July 8, 2003 7:19 PM LL2365.book Page 3 Tuesday, July 8, 2003 7:19 PM Congratulations on purchasing your Apple Wireless Mouse. Use the information in this booklet to quickly set up and use your new mouse. Apple Wireless Mouse Features Your Apple Wireless Mouse uses Bluetooth to communicate with your computer within a 30-foot range. Bluetooth is a specification for wireless data transmission. Getting Started To set up your Apple Wireless Mouse, you need: • A Macintosh with a built-in Bluetooth module or an external USB Bluetooth Adapter. Note: If you computer didn’t come with an internal Bluetooth module, you can purchase a Bluetooth USB Adapter from the Apple Store at store.apple.com. • Mac OS X v10.2.6 or later. To update your software, choose Apple (K) > System Preferences, click Software Update, and click Check Now. Use Software Update often to ensure your system has the latest software. • Two AA lithium batteries (included). • The Wireless Keyboard & Mouse Software disc. • A USB mouse. LL2365.book Page 4 Tuesday, July 8, 2003 7:19 PM Setting Up Your Apple Wireless Mouse To use your Apple Wireless Mouse, you have to set it up. This includes installing the batteries, installing firmware and software on your computer, and pairing your mouse and computer. Step 1: Installing batteries. Your Apple Wireless Mouse comes with two lithium batteries. To install the batteries: 1 Turn the mouse over and remove the bottom cover. 2 Slide the batteries into the battery bay according to the illustration below. Slide this switch up to cover the LED. This turns the mouse off. English To open the mouse, push this latch downward slightly. This releases the bottom cover. Insert two AA batteries in the mouse. Note the polarity of the batteries: The positive (+) terminals on both batteries are oriented toward the LED. LL2365.book Page 5 Tuesday, July 8, 2003 7:19 PM 3 Replace the bottom cover and turn the mouse off. Important: Don’t turn your mouse on until just before you are ready to set it up with your computer in Step 3. The LED on the back does not blink when the mouse is off. For more information about batteries, see “About Your Battery” on page 9. Step 2: Installing firmware and software. Use Software Update (located in Apple (K) menu/System Preferences) to upgrade your system software to the most recent version before you install firmware or software. If your Macintosh doesn’t have an internal Bluetooth module, plug the Bluetooth USB Adapter in to any available USB port on your computer. Use the Wireless Keyboard & Mouse Software disc that come with your mouse to install the firmware and software. Important: The firmware install may take up to five minutes.Before you install firmware or software, turn off Screen Effects and Energy Saver (located in Apple (K) menu/ System Preferences). Don’t use your computer during the installation. If you are installing on a PowerBook, make sure that is plugged in to AC power. To install the firmware: 1 Insert the Wireless Keyboard & Mouse Software disc that come with your mouse. 2 Double-click the Bluetooth Firmware Updater icon. 3 Follow the onscreen instructions. Once the firmware is installed, leave the disc in the drive and install the software. To install the software: 1 Double-click the KeyboardAndMouse.pkg icon. 2 Follow the onscreen instructions. English LL2365.book Page 6 Tuesday, July 8, 2003 7:19 PM Step 3: Pairing your computer and mouse. Before you can use your Apple Wireless Mouse with your computer, you have to “pair” your mouse and computer. Pairing is a one time setup that allows your mouse and computer to communicate wirelessly with each other. 1 Slide the switch that covers the LED to turn the mouse on and expose the LED. Slide this switch to turn the mouse on and off. When the switch uncovers the LED, the mouse is on. 2 Choose Apple (K) > System Preferences, and click Keyboard & Mouse. 3 Click Setup New Device. 4 Select Mouse from the list and click Continue. 5 Follow the onscreen instructions to pair your mouse and your computer. 6 Once you successfully set up your mouse, you can pair another device. English LL2365.book Page 7 Tuesday, July 8, 2003 7:19 PM Using Your Mouse Because the Apple Wireless Mouse uses optical tracking technology, you can use it on most surfaces. Avoid clear, glossy, or intricately patterned surfaces and half-tone images. Nonreflective, opaque surfaces without repetitive patterns work best. To click, press the front of the mouse. If you run out of room and want to keep the mouse clicked while you lift it, click the mouse, then squeeze the sides with your thumb and fingers as you lift. For information about ergonomics, health, and safety, visit the Apple ergonomics website at www.apple.com/about/ergonomics. Naming your Mouse You can give your mouse a unique name when you pair it with your computer. You can also rename your mouse using the Keyboard & Mouse system preferences. Choose Apple (K) > System Preferences, and click Keyboard & Mouse. Click the Bluetooth tab and enter a name in the dialog. English LL2365.book Page 8 Tuesday, July 8, 2003 7:19 PM Adjusting Your Mouse You can adjust the tension on your Apple Wireless Mouse. 1 Remove the battery bay cover on the rear of the mouse. 2 Move the button above the LED to adjust the tension. • For more tension, move the button toward the plus sign or to the left. • For less tension, move the button toward the minus sign or to the right. 3 Replace the battery bay cover. Slide the switch to “+” for more tension, and “– ” for less tension. You can also adjust the Tracking Speed and Double-Click Speed. 1 Choose Apple (K) > System Preferences, and click Keyboard & Mouse. 2 Click the Mouse tab. 3 Adjust the tracking or double-click speed. English LL2365.book Page 9 Tuesday, July 8, 2003 7:19 PM About Your Battery Your Apple Wireless Mouse comes with two lithium batteries, but you can also use alkaline and rechargeable AA batteries. Warning When you replace the batteries, replace them all at the same time. In addition, don’t mix battery types. With lithium batteries, don’t open, install backwards, or expose to fire, high temperatures, or water. Battery Indicator Use the Keyboard & Mouse system preferences to check the battery level indicator. Choose Apple (K) > System Preferences, and click Keyboard & Mouse. Note: To conserve battery power, turn your mouse off when it's not in use. English LL2365.book Page 10 Tuesday, July 8, 2003 7:19 PM 10 English LL2365.book Page 25 Tuesday, July 8, 2003 7:19 PM Communications Regulation Information This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See instructions if interference to radio or television reception is suspected. Radio and Television Interference The equipment described in this manual generates, uses, and can radiate radio-frequency energy. If it is not installed and used properly— that is, in strict accordance with Apple’s instructions—it may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in Part 15 of FCC rules. These specifications are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. You can determine whether your computer system is causing interference by turning it off.If the interference stops, it was probably caused by the computer or one of the peripheral devices. If your computer system does cause interference to radio or television reception, try to correct the interference by using one or more of the following measures: • Turn the television or radio antenna until the interference stops. • Move the computer to one side or the other of the television or radio. • Move the computer farther away from the television or radio. • Plug the computer into an outlet that is on a different circuit from the television or radio. (That is, make certain the computer and the television or radio are on circuits controlled by different circuit breakers or fuses.) If necessary, consult an Apple Authorized Service Provider or Apple. See the service and support information that came with your Apple product. Or, consult an experienced radio/ television technician for additional suggestions. 25 LL2365.book Page 26 Tuesday, July 8, 2003 7:19 PM Important: Changes or modifications to this product not authorized by Apple Computer, Inc., could void the FCC compliance and negate your authority to operate the product. This product was tested for FCC compliance under conditions that included the use of Apple peripheral devices and Apple shielded cables and connectors between system components. It is important that you use Apple peripheral devices and shielded cables and connectors between system components to reduce the possibility of causing interference to radios, television sets, and other electronic devices. You can obtain Apple peripheral devices and the proper shielded cables and connectors through an Apple-authorized dealer. For non-Apple peripheral devices, contact the manufacturer or dealer for assistance. Responsible party (contact for FCC matters only): Apple Computer, Inc. Product Compliance, 1 Infinite Loop M/S 26-A, Cupertino, CA 950142084, 408-974-2000. Industry Canada Statement This Class B device meets all requirements of the Canadian interference-causing equipment regulations. Cet appareil numérique de la Class B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Battery Disposal Information Dispose of batteries according to your local environmental laws and guidelines. Nederlands Gebruikte batterijen kunnen worden ingeleverd bij de chemokar of in een speciale batterijcontainer voor klein chemisch afval (kca) worden gedeponeerd. VCCI Class B Statement Mouse Class 1 LED Information The Apple optical mouse is a Class 1 LED product in accordance with IEC 60825-1 A1 A2. LL2365.book Page 27 Tuesday, July 8, 2003 7:19 PM Caution: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. For your safety have this equipment serviced only by an Appleauthorized service provider. European Compliance Statement This product complies with the requirements of European Directives 72/23/EEC and 89/336/EEC. © 2003 Apple Computer, Inc. All rights reserved. Apple, the Apple logo, Mac, Macintosh, and Mac OS are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. LL2365.book Page 28 Tuesday, July 8, 2003 7:19 PM www.apple.com Printed in XXXX. *xxx-xxxx-x*
Source Exif Data [exif.tools]:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Create Date : 2003:07:08 19:21:09-07:00 Modify Date : 2003:07:08 19:21:09-07:00 Page Count : 14 Creation Date : 2003:07:09 02:21:09Z Mod Date : 2003:07:09 02:21:09Z Producer : Acrobat Distiller 5.00 for Macintosh Author : Metadata Date : 2003:07:09 02:21:09Z Creator : , Title : LL2365.book