A1430 802.11 a/b/g/n radio, Bluetooth Radio Function RF Exposure Info SAR wiFi 5GHz Plots Apple Inc.

Apple Inc. 802.11 a/b/g/n radio, Bluetooth Radio Function

Alternate Views: Download [PDF]
Date/Time: 10/24/2011 9:41:58 PM
Test Laboratory: UL CCS SAR Lab D
WiFi 5GHz_Body
Communication System: 802.11abgn; Frequency: 5200 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5200 MHz; σ = 5.47 mho/m; εr = 48.6; ρ = 1000 kg/m3
Phantom section: Flat Section
Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C
DASY4 Configuration:
- Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Probe: EX3DV4 - SN3749; ConvF(4.07, 4.07, 4.07); Calibrated: 12/13/2010
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1259; Calibrated: 5/3/2011
- Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: SN:1017
- Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186
Rear/Base_Ch40/Area Scan (201x301x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (interpolated) = 0.045 mW/g
Rear/Base_Ch40/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm
Reference Value = 2.76 V/m; Power Drift = 0.188 dB
Peak SAR (extrapolated) = 0.348 W/kg
SAR(1 g) = 0.038 mW/g; SAR(10 g) = 0.015 mW/g
Maximum value of SAR (measured) = 0.043 mW/g
0 dB = 0.043mW/g
Date/Time: 10/24/2011 9:08:20 PM
Test Laboratory: UL CCS SAR Lab D
WiFi 5GHz_Body
Communication System: 802.11abgn; Frequency: 5200 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5200 MHz; σ = 5.47 mho/m; εr = 48.6; ρ = 1000 kg/m3
Phantom section: Flat Section
Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C
DASY4 Configuration:
- Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Probe: EX3DV4 - SN3749; ConvF(4.07, 4.07, 4.07); Calibrated: 12/13/2010
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1259; Calibrated: 5/3/2011
- Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: SN:1017
- Measurement SW: DASY4, V4.7 Build 80; Post processing SW: SEMCAD, V1.8 Build 186
Bottom_Ch40/Area Scan (81x201x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (interpolated) = 1.03 mW/g
Bottom_Ch40/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm
Reference Value = 11.8 V/m; Power Drift = -0.104 dB
Peak SAR (extrapolated) = 1.65 W/kg
SAR(1 g) = 0.522 mW/g; SAR(10 g) = 0.173 mW/g
Maximum value of SAR (measured) = 0.865 mW/g
0 dB = 0.865mW/g
Date/Time: 10/24/2011 9:39:18 PM
Test Laboratory: UL CCS SAR Lab D
WiFi 5GHz_Body
Communication System: 802.11abgn; Frequency: 5200 MHz; Duty Cycle: 1:1
Bottom_Ch40/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm
Maximum value of SAR (measured) = 0.679 mW/g
Date: 10/12/2011
Test Laboratory: UL CCS SAR Lab A
WiFi 5GHz_Body
Communication System: WLAN 5GHz; Frequency: 5200 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5200 MHz; σ = 5.279 mho/m; εr = 48.713; ρ = 1000 kg/m3
Phantom section: Flat Section
Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C
DASY5 Configuration:
- Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Probe: EX3DV4 - SN3686; ConvF(3.98, 3.98, 3.98); Calibrated: 1/24/2011
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Electronics: DAE3 Sn500; Calibrated: 7/14/2011
- Phantom: ELI v4.0(A); Type: QDOVA001BB; Serial: 1119
- Measurement SW: DASY52, Version 52.6 (2);SEMCAD X Version 14.4.5 (3634)
Right Edge/802.11a_ch 40/Area Scan (81x271x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (interpolated) = 0.052 mW/g
Right Edge/802.11a_ch 40/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=4mm, dy=4mm,
dz=2.5mm
Reference Value = 3.186 V/m; Power Drift = -0.10 dB
Peak SAR (extrapolated) = 0.147 W/kg
SAR(1 g) = 0.047 mW/g; SAR(10 g) = 0.045 mW/g
Maximum value of SAR (measured) = 0.147 mW/g
0 dB = 0.050mW/g
Date: 10/13/2011
Test Laboratory: UL CCS SAR Lab A
WiFi 5GHz_Body
Communication System: WLAN 5GHz; Frequency: 5300 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5300 MHz; σ = 5.404 mho/m; εr = 48.517; ρ = 1000 kg/m3
Phantom section: Flat Section
Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C
DASY5 Configuration:
- Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Probe: EX3DV4 - SN3686; ConvF(3.7, 3.7, 3.7); Calibrated: 1/24/2011
- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm
(Mechanical Surface Detection)
- Electronics: DAE3 Sn500; Calibrated: 7/14/2011
- Phantom: ELI v4.0(A); Type: QDOVA001BB; Serial: 1119
- Measurement SW: DASY52, Version 52.6 (2);SEMCAD X Version 14.4.5 (3634)
Rear/Base/802.11a_ch 60/Area Scan (201x301x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (interpolated) = 0.159 mW/g
Rear/Base/802.11a_ch 60/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=4mm, dy=4mm,
dz=2.5mm
Reference Value = 5.632 V/m; Power Drift = -0.06 dB
Peak SAR (extrapolated) = 0.301 W/kg
SAR(1 g) = 0.113 mW/g; SAR(10 g) = 0.076 mW/g
Maximum value of SAR (measured) = 0.145 mW/g
0 dB = 0.150mW/g
Date: 10/13/2011
Test Laboratory: UL CCS SAR Lab A
WiFi 5GHz_Body
Communication System: WLAN 5GHz; Frequency: 5260 MHz;Duty Cycle: 1:1
Medium parameters used: f = 5260 MHz; σ = 5.347 mho/m; εr = 48.591; ρ = 1000 kg/m3
Phantom section: Flat Section
Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C
DASY5 Configuration:
- Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Probe: EX3DV4 - SN3686; ConvF(3.7, 3.7, 3.7); Calibrated: 1/24/2011
- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm
(Mechanical Surface Detection)
- Electronics: DAE3 Sn500; Calibrated: 7/14/2011
- Phantom: ELI v4.0(A); Type: QDOVA001BB; Serial: 1119
- Measurement SW: DASY52, Version 52.6 (2);SEMCAD X Version 14.4.5 (3634)
Bottom/802.11a_ch 52/Area Scan (81x201x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (interpolated) = 1.738 mW/g
Bottom/802.11a_ch 52/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm
Reference Value = 16.663 V/m; Power Drift = 0.03 dB
Peak SAR (extrapolated) = 2.988 W/kg
SAR(1 g) = 0.966 mW/g; SAR(10 g) = 0.379 mW/g
Maximum value of SAR (measured) = 1.584 mW/g
0 dB = 1.580mW/g
Date: 10/13/2011
Test Laboratory: UL CCS SAR Lab A
WiFi 5GHz_Body
Communication System: WLAN 5GHz; Frequency: 5300 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5300 MHz; σ = 5.404 mho/m; εr = 48.517; ρ = 1000 kg/m3
Phantom section: Flat Section
Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C
DASY5 Configuration:
- Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Probe: EX3DV4 - SN3686; ConvF(3.7, 3.7, 3.7); Calibrated: 1/24/2011
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Electronics: DAE3 Sn500; Calibrated: 7/14/2011
- Phantom: ELI v4.0(A); Type: QDOVA001BB; Serial: 1119
- Measurement SW: DASY52, Version 52.6 (2);SEMCAD X Version 14.4.5 (3634)
Bottom/802.11a_ch 60/Area Scan (81x201x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (interpolated) = 1.839 mW/g
Bottom/802.11a_ch 60/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm
Reference Value = 16.884 V/m; Power Drift = 0.02 dB
Peak SAR (extrapolated) = 3.110 W/kg
SAR(1 g) = 1 mW/g; SAR(10 g) = 0.384 mW/g
Maximum value of SAR (measured) = 1.633 mW/g
0 dB = 1.630mW/g
Date: 10/13/2011
Test Laboratory: UL CCS SAR Lab A
WiFi 5GHz_Body
Communication System: WLAN 5GHz; Frequency: 5320 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5320 MHz; σ = 5.425 mho/m; εr = 48.496; ρ = 1000 kg/m3
Phantom section: Flat Section
Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C
DASY5 Configuration:
- Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Probe: EX3DV4 - SN3686; ConvF(3.7, 3.7, 3.7); Calibrated: 1/24/2011
- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm
(Mechanical Surface Detection)
- Electronics: DAE3 Sn500; Calibrated: 7/14/2011
- Phantom: ELI v4.0(A); Type: QDOVA001BB; Serial: 1119
- Measurement SW: DASY52, Version 52.6 (2);SEMCAD X Version 14.4.5 (3634)
Bottom/802.11a_ch 64/Area Scan (81x201x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (interpolated) = 1.989 mW/g
Bottom/802.11a_ch 64/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm
Reference Value = 16.981 V/m; Power Drift = -0.02 dB
Peak SAR (extrapolated) = 3.180 W/kg
SAR(1 g) = 1.02 mW/g; SAR(10 g) = 0.394 mW/g
Maximum value of SAR (measured) = 1.651 mW/g
0 dB = 1.650mW/g
Date: 10/13/2011
Test Laboratory: UL CCS SAR Lab A
WiFi 5GHz_Body
Communication System: WLAN 5GHz; Frequency: 5320 MHz; Duty Cycle: 1:1
Bottom/802.11a_ch 64/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm
Maximum value of SAR (measured) = 1.327 mW/g
Date: 10/13/2011
Test Laboratory: UL CCS SAR Lab A
WiFi 5GHz_Body
Communication System: WLAN 5GHz; Frequency: 5300 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5300 MHz; σ = 5.404 mho/m; εr = 48.517; ρ = 1000 kg/m3
Phantom section: Flat Section
Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C
DASY5 Configuration:
- Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Probe: EX3DV4 - SN3686; ConvF(3.7, 3.7, 3.7); Calibrated: 1/24/2011
- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 2.5mm
(Mechanical Surface Detection)
- Electronics: DAE3 Sn500; Calibrated: 7/14/2011
- Phantom: ELI v4.0(A); Type: QDOVA001BB; Serial: 1119
- Measurement SW: DASY52, Version 52.6 (2);SEMCAD X Version 14.4.5 (3634)
Right Edge/802.11a_ch 60/Area Scan (81x271x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (interpolated) = 0.071 mW/g
Right Edge/802.11a_ch 60/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=4mm, dy=4mm,
dz=2.5mm
Reference Value = 3.955 V/m; Power Drift = -0.134 dB
Peak SAR (extrapolated) = 0.085 W/kg
SAR(1 g) = 0.058 mW/g; SAR(10 g) = 0.052 mW/g
Maximum value of SAR (measured) = 0.068 mW/g
0 dB = 0.070mW/g
Date/Time: 10/12/2011 11:50:32 PM
Test Laboratory: UL CCS SAR Lab D
WiFi 5GHz_Body
DUT: Apple; Type: 17 inch; Serial: N/A
Communication System: 802.11abgn; Frequency: 5600 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5600 MHz; σ = 5.85 mho/m; εr = 47.6; ρ = 1000 kg/m3
Phantom section: Flat Section
Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C
DASY4 Configuration:
- Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Probe: EX3DV4 - SN3749; ConvF(3.36, 3.36, 3.36); Calibrated: 12/13/2010
- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 2.5mm
(Mechanical Surface Detection)
- Electronics: DAE4 Sn1259; Calibrated: 5/3/2011
- Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: SN:1017
- Measurement SW: DASY4, V4.7 Build 80; Post processing SW: SEMCAD, V1.8 Build 186
Rear/Base_Ch120/Area Scan (201x301x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (interpolated) = 0.150 mW/g
Rear/Base_Ch120/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm
Reference Value = 4.02 V/m; Power Drift = -0.118 dB
Peak SAR (extrapolated) = 0.622 W/kg
SAR(1 g) = 0.063 mW/g; SAR(10 g) = 0.016 mW/g
Maximum value of SAR (measured) = 0.076 mW/g
0 dB = 0.150mW/g
Date/Time: 10/13/2011 3:06:17 AM
Test Laboratory: UL CCS SAR Lab D
WiFi 5GHz_Body
DUT: Apple; Type: 17 inch; Serial: N/A
Communication System: 802.11abgn; Frequency: 5500 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5500 MHz; σ = 5.72 mho/m; εr = 47.8; ρ = 1000 kg/m3
Phantom section: Flat Section
Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C
DASY4 Configuration:
- Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Probe: EX3DV4 - SN3749; ConvF(3.53, 3.53, 3.53); Calibrated: 12/13/2010
- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 2.5mm
(Mechanical Surface Detection)
- Electronics: DAE4 Sn1259; Calibrated: 5/3/2011
- Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: SN:1017
- Measurement SW: DASY4, V4.7 Build 80; Post processing SW: SEMCAD, V1.8 Build 186
Bottom_Ch100/Area Scan (81x201x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (interpolated) = 1.89 mW/g
Bottom_Ch100/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm
Reference Value = 17.1 V/m; Power Drift = -0.19 dB
Peak SAR (extrapolated) = 2.77 W/kg
SAR(1 g) = 0.875 mW/g; SAR(10 g) = 0.315 mW/g
Maximum value of SAR (measured) = 1.50 mW/g
0 dB = 1.50mW/g
Date/Time: 10/12/2011 10:29:47 PM
Test Laboratory: UL CCS SAR Lab D
WiFi 5GHz_Body
DUT: Apple; Type: 17 inch; Serial: N/A
Communication System: 802.11abgn; Frequency: 5600 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5600 MHz; σ = 5.85 mho/m; εr = 47.6; ρ = 1000 kg/m3
Phantom section: Flat Section
Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C
DASY4 Configuration:
- Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Probe: EX3DV4 - SN3749; ConvF(3.36, 3.36, 3.36); Calibrated: 12/13/2010
- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 2.5mm
(Mechanical Surface Detection)
- Electronics: DAE4 Sn1259; Calibrated: 5/3/2011
- Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: SN:1017
- Measurement SW: DASY4, V4.7 Build 80; Post processing SW: SEMCAD, V1.8 Build 186
Bottom_Ch120/Area Scan (81x201x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (interpolated) = 2.46 mW/g
Bottom_Ch120/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm
Reference Value = 17.9 V/m; Power Drift = 0.171 dB
Peak SAR (extrapolated) = 3.01 W/kg
SAR(1 g) = 0.946 mW/g; SAR(10 g) = 0.333 mW/g
Maximum value of SAR (measured) = 1.63 mW/g
0 dB = 1.63mW/g
Date/Time: 10/25/2011 12:37:46 AM
Test Laboratory: UL CCS SAR Lab D
WiFi 5GHz_Body
Communication System: 802.11abgn; Frequency: 5700 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5700 MHz; σ = 6.16 mho/m; εr = 47.6; ρ = 1000 kg/m3
Phantom section: Flat Section
Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C
DASY4 Configuration:
- Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Probe: EX3DV4 - SN3749; ConvF(3.65, 3.65, 3.65); Calibrated: 12/13/2010
- Sensor-Surface: 2.5mm (Mechanical Surface Detection)
- Electronics: DAE4 Sn1259; Calibrated: 5/3/2011
- Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: SN:1017
- Measurement SW: DASY4, V4.7 Build 80; Post processing SW: SEMCAD, V1.8 Build 186
Bottom_Ch140/Area Scan (81x201x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (interpolated) = 2.02 mW/g
Bottom_Ch140/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm
Reference Value = 15.9 V/m; Power Drift = -0.116 dB
Peak SAR (extrapolated) = 3.25 W/kg
SAR(1 g) = 0.958 mW/g; SAR(10 g) = 0.333 mW/g
Maximum value of SAR (measured) = 1.68 mW/g
0 dB = 1.68mW/g
Date/Time: 10/25/2011 1:10:58 AM
Test Laboratory: UL CCS SAR Lab D
WiFi 5GHz_Body
Communication System: 802.11abgn; Frequency: 5700 MHz; Duty Cycle: 1:1
Bottom_Ch140/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm
Maximum value of SAR (measured) = 1.26 mW/g
Date/Time: 10/12/2011 11:24:06 PM
Test Laboratory: UL CCS SAR Lab D
WiFi 5GHz_Body
DUT: Apple; Type: 17 inch; Serial: N/A
Communication System: 802.11abgn; Frequency: 5600 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5600 MHz; σ = 5.85 mho/m; εr = 47.6; ρ = 1000 kg/m3
Phantom section: Flat Section
Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C
DASY4 Configuration:
- Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Probe: EX3DV4 - SN3749; ConvF(3.36, 3.36, 3.36); Calibrated: 12/13/2010
- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 2.5mm
(Mechanical Surface Detection)
- Electronics: DAE4 Sn1259; Calibrated: 5/3/2011
- Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: SN:1017
- Measurement SW: DASY4, V4.7 Build 80; Post processing SW: SEMCAD, V1.8 Build 186
Right Edge_Ch120/Area Scan (81x271x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (interpolated) = 0.043 mW/g
Right Edge_Ch120/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm
Reference Value = 2.37 V/m; Power Drift = -0.135 dB
Peak SAR (extrapolated) = 0.189 W/kg
SAR(1 g) = 0.014 mW/g; SAR(10 g) = 0.00179 mW/g
Maximum value of SAR (measured) = 0.029 mW/g
0 dB = 0.029mW/g
Date/Time: 10/13/2011 12:35:12 AM
Test Laboratory: UL CCS SAR Lab D
WiFi 5GHz_Body
DUT: Apple; Type: 17 inch; Serial: N/A
Communication System: 802.11abgn; Frequency: 5785 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5785 MHz; σ = 6.1 mho/m; εr = 47.3; ρ = 1000 kg/m3
Phantom section: Flat Section
Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C
DASY4 Configuration:
- Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Probe: EX3DV4 - SN3749; ConvF(3.65, 3.65, 3.65); Calibrated: 12/13/2010
- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 2.5mm
(Mechanical Surface Detection)
- Electronics: DAE4 Sn1259; Calibrated: 5/3/2011
- Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: SN:1017
- Measurement SW: DASY4, V4.7 Build 80; Post processing SW: SEMCAD, V1.8 Build 186
Rear/Base_Ch157/Area Scan (201x301x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (interpolated) = 0.151 mW/g
Rear/Base_Ch157/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm
Reference Value = 4.26 V/m; Power Drift = 0.089 dB
Peak SAR (extrapolated) = 0.493 W/kg
SAR(1 g) = 0.057 mW/g; SAR(10 g) = 0.022 mW/g
Maximum value of SAR (measured) = 0.116 mW/g
0 dB = 0.151mW/g
Date/Time: 10/13/2011 2:12:01 AM
Test Laboratory: UL CCS SAR Lab D
WiFi 5GHz_Body
DUT: Apple; Type: 17 inch; Serial: N/A
Communication System: 802.11abgn; Frequency: 5745 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5745 MHz; σ = 6.05 mho/m; εr = 47.4; ρ = 1000 kg/m3
Phantom section: Flat Section
Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C
DASY4 Configuration:
- Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Probe: EX3DV4 - SN3749; ConvF(3.65, 3.65, 3.65); Calibrated: 12/13/2010
- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 2.5mm
(Mechanical Surface Detection)
- Electronics: DAE4 Sn1259; Calibrated: 5/3/2011
- Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: SN:1017
- Measurement SW: DASY4, V4.7 Build 80; Post processing SW: SEMCAD, V1.8 Build 186
Bottom_Ch149/Area Scan (81x201x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (interpolated) = 2.30 mW/g
Bottom_Ch149/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm
Reference Value = 19.1 V/m; Power Drift = -0.166 dB
Peak SAR (extrapolated) = 3.66 W/kg
SAR(1 g) = 1.11 mW/g; SAR(10 g) = 0.397 mW/g
Maximum value of SAR (measured) = 1.88 mW/g
0 dB = 1.88mW/g
Date/Time: 10/13/2011 2:34:07 AM
Test Laboratory: UL CCS SAR Lab D
WiFi 5GHz_Body
Communication System: 802.11abgn; Frequency: 5745 MHz; Duty Cycle: 1:1
Bottom_Ch149/Z Scan (1x1x21): Measurement grid: dx=20mm, dy=20mm, dz=5mm
Maximum value of SAR (measured) = 1.84 mW/g
Date/Time: 10/13/2011 1:44:26 AM
Test Laboratory: UL CCS SAR Lab D
WiFi 5GHz_Body
DUT: Apple; Type: 17 inch; Serial: N/A
Communication System: 802.11abgn; Frequency: 5785 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5785 MHz; σ = 6.1 mho/m; εr = 47.3; ρ = 1000 kg/m3
Phantom section: Flat Section
Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C
DASY4 Configuration:
- Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Probe: EX3DV4 - SN3749; ConvF(3.65, 3.65, 3.65); Calibrated: 12/13/2010
- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 2.5mm
(Mechanical Surface Detection)
- Electronics: DAE4 Sn1259; Calibrated: 5/3/2011
- Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: SN:1017
- Measurement SW: DASY4, V4.7 Build 80; Post processing SW: SEMCAD, V1.8 Build 186
Bottom_Ch157/Area Scan (81x201x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (interpolated) = 2.36 mW/g
Bottom_Ch157/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm
Reference Value = 16.1 V/m; Power Drift = 0.197 dB
Peak SAR (extrapolated) = 3.64 W/kg
SAR(1 g) = 1.07 mW/g; SAR(10 g) = 0.373 mW/g
Maximum value of SAR (measured) = 1.85 mW/g
0 dB = 1.85mW/g
Date/Time: 10/13/2011 2:38:51 AM
Test Laboratory: UL CCS SAR Lab D
WiFi 5GHz_Body
DUT: Apple; Type: 17 inch; Serial: N/A
Communication System: 802.11abgn; Frequency: 5825 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5825 MHz; σ = 6.16 mho/m; εr = 47.2; ρ = 1000 kg/m3
Phantom section: Flat Section
Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C
DASY4 Configuration:
- Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Probe: EX3DV4 - SN3749; ConvF(3.65, 3.65, 3.65); Calibrated: 12/13/2010
- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 2.5mm
(Mechanical Surface Detection)
- Electronics: DAE4 Sn1259; Calibrated: 5/3/2011
- Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: SN:1017
- Measurement SW: DASY4, V4.7 Build 80; Post processing SW: SEMCAD, V1.8 Build 186
Bottom_Ch165/Area Scan (81x201x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (interpolated) = 2.19 mW/g
Bottom_Ch165/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm
Reference Value = 17.9 V/m; Power Drift = -0.076 dB
Peak SAR (extrapolated) = 3.51 W/kg
SAR(1 g) = 1.04 mW/g; SAR(10 g) = 0.365 mW/g
Maximum value of SAR (measured) = 1.78 mW/g
0 dB = 2.19mW/g
Date/Time: 10/13/2011 1:17:42 AM
Test Laboratory: UL CCS SAR Lab D
WiFi 5GHz_Body
DUT: Apple; Type: 17 inch; Serial: N/A
Communication System: 802.11abgn; Frequency: 5785 MHz; Duty Cycle: 1:1
Medium parameters used: f = 5785 MHz; σ = 6.1 mho/m; εr = 47.3; ρ = 1000 kg/m3
Phantom section: Flat Section
Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C
DASY4 Configuration:
- Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Probe: EX3DV4 - SN3749; ConvF(3.65, 3.65, 3.65); Calibrated: 12/13/2010
- Sensor-Surface: 2.5mm (Mechanical Surface Detection (Locations From Previous Scan Used))Sensor-Surface: 2.5mm
(Mechanical Surface Detection)
- Electronics: DAE4 Sn1259; Calibrated: 5/3/2011
- Phantom: Flat Phantom ELI4.0; Type: QDOVA001BB; Serial: SN:1017
- Measurement SW: DASY4, V4.7 Build 80; Post processing SW: SEMCAD, V1.8 Build 186
Right Edge_Ch157/Area Scan (81x271x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (interpolated) = 0.127 mW/g
Right Edge_Ch157/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm
Reference Value = 2.89 V/m; Power Drift = -0.07 dB
Peak SAR (extrapolated) = 0.272 W/kg
SAR(1 g) = 0.028 mW/g; SAR(10 g) = 0.00642 mW/g
Maximum value of SAR (measured) = 0.032 mW/g
0 dB = 0.032mW/g
Download: A1430 802.11 a/b/g/n radio, Bluetooth Radio Function RF Exposure Info SAR wiFi 5GHz Plots Apple Inc.
Mirror Download [FCC.gov]A1430 802.11 a/b/g/n radio, Bluetooth Radio Function RF Exposure Info SAR wiFi 5GHz Plots Apple Inc.
Document ID1632809
Application IDGMBuy1XdT6KUcao+AzaV7g==
Document DescriptionSAR wiFi 5GHz Plots
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeRF Exposure Info
Display FormatAdobe Acrobat PDF - pdf
Filesize71.63kB (895370 bits)
Date Submitted2012-02-07 00:00:00
Date Available2012-03-07 00:00:00
Creation Date2011-12-06 21:48:12
Producing SoftwareAcrobat Distiller 9.3.3 (Windows)
Document Lastmod2011-12-28 17:14:23
Document TitleSAR wiFi 5GHz Plots
Document CreatorPScript5.dll Version 5.2.2
Document Author: 29446