FCC ID BCG-E8950A

This device supports the following LTE bands and channel bandwidths: 5/10 MHz in bands 13, 14, 17, and 30; 5/10/15/20 MHz in bands 7, 71, and 41; 1.4/3/5/10 MHz in bands 5, 12, and 26; 1.4/3/5/10/15/20 MHz in bands 2, 4, 25, and 66. This device supports inter-band and intra-band uplink carrier aggregation.

This device supports the following 5GNR bands and channel bandwidths: 10/15/20/25/30/35/40/45/50/60/70/80/90/100 MHz in band n41; 10/15/20/25/30/40/50/60/70/80/90/100 MHz in band n77 (Part 27.5(o) and 27.5(m)); 5/10/15/20/25/30/35/40/50 MHz in band n7; 5/10/15/20/25/30/35/40 MHz in bands n2, n25; 5/10/15/20/25/30/35/40/45 MHz in band n66; 5/10/15/20 MHz in bands n5, n26; 5/10/15/20/25/30 MHz in band n71; 5/10/15 MHz in band n12, n70; 5/10 in band n30 and band n14. Uplink MIMO is supported in bands n77 and n41.

For LTE / 5GNR the line entries are the highest measured total power and widest bandwidth within each band for each emissions designator for single carrier LTE / 5GNR operations within each band. In addition, the listing includes the highest measured total power and widest bandwidth for each band across intra-band carrier aggregation and 5GNR/LTE intra-band multi-carrier carrier operations.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 1.19 W/kg, 1.19 W/kg, 1.19 W/kg and 1.59 W/Kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

This device contains functions that are not operational in U.S. Territories; filings under this FCC ID are approved only for U.S. operations.

HAC 2019. Conversational gain values of 14.1 dB (with hearing aid) and 17.6 dB (without hearing aid). HAC compliance assessed under waiver DA 23-914.

LTE (band 53) and 5GNR (band n53) support channel bandwidths of 1.4/3/5/10 MHz and 10MHz respectively. The corresponding line entries are the highest measured total power and widest bandwidth across LTE and 5GNR for QPSK and QAM emissions.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), extremity (hand), and simultaneous transmission exposure conditions are 0.91 W/kg, 0.98 W/kg, 0.98 W/kg, 2.94 W/kg (10-g) and 1.57 W/kg / 2.97 W/Kg (10g) respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

HAC 2019. Conversational gain values of 14.1 dB (with hearing aid) and 17.6 dB (without hearing aid). HAC compliance assessed under waiver DA 23-914.

This device complies with the emissions limits of 47 CFR 30.203(d)(2).

This device supports single channel bandwidths of 50 MHz and 100 MHz in bands n258, n261 and n260. Up to 4 channels can be aggregated to support a total nominal bandwidth of 400 MHz. Powers listed are for the single channel bandwidths of 50 MHz and 100 MHz, and for the maximum aggregated channel bandwidths of 400 MHz.

This device supports 20 MHz, 40 MHz, 80 MHz and 160 MHz channel bandwidths for 802.11 operations. It also supports narrowband UNII with bandwidths of 1 MHz, 2 MHz, 4 MHz and 8 MHz in UNII bands 1 and 3 and 802.15.4ab in UNII-3.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are <0.1 W/kg, 1.17 W/kg, 1.17 W/kg, and 1.59 W/kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

HAC 2019. Conversational gain values of 14.1 dB (with hearing aid) and 17.6 dB (without hearing aid). HAC compliance assessed under waiver DA 23-914.

This device supports LTE channel bandwidths of 5/10/15/20 MHz and 5GNR bandwidths of 10/15/20/30/40 MHz.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 1.17 W/kg, 1.18 W/kg, 1.18 W/kg, and 1.58 W/kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

HAC 2019. Conversational gain values of 14.1 dB (with hearing aid) and 17.6 dB (without hearing aid). HAC compliance assessed under waiver DA 23-914.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 1.06 W/kg, 0.99 W/kg, 0.99 W/kg, and 1.59 W/kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

This device supports 20 MHz, 40 MHz, 80 MHz and 160 MHz channel bandwidths.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are <0.1 W/kg, 0.57 W/kg, 0.57 W/kg and 1.59 W/kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

HAC 2019. Conversational gain values of 14.1 dB (with hearing aid) and 17.6 dB (without hearing aid). HAC compliance assessed under waiver DA 23-914.

This device supports 20 MHz channel bandwidth for 802.11g/n/ax/be, 1MHz, 2MHz and 4MHz bandwidths for Bluetooth. It also supports 802.15.4.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are 1.13 W/kg, 1.19 W/kg, 1.19 W/kg, and 1.59 W/kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

HAC 2019. Conversational gain values of 14.1 dB (with hearing aid) and 17.6 dB (without hearing aid). HAC compliance assessed under waiver DA 23-914.

This device supports 20 MHz, 40 MHz, 80 MHz and 160 MHz channel bandwidths for 802.11. It also supports narrowband UNII with bandwidths of 1 MHz, 2 MHz, 4 MHz and 8 MHz in UNII band 5.

The highest reported SAR values for head, body-worn accessory, product specific (hot spot), and simultaneous transmission exposure conditions are <0.1 W/kg, 0.57 W/kg, 0.57 W/kg and 1.59 W/kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 5 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.