FCC ID BCR-MR1718

BI-DIRECTIONAL AMPLIFIER

by Andrew Wireless Innovations Group

Grantee Code: BCR   Product Code: MR1718
Latest application date: 2010-06-02

FCC ID Device Details

FCC IDBCR-MR1718
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeBCR
Product CodeMR1718
Applicant BusinessAndrew Wireless Innovations Group 🇺🇸
Related Domains commscope.com
Equipment ClassBI-DIRECTIONAL AMPLIFIER
Test FirmNemko Dallas, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
1710-1755 MHzClass II permissive change or modification of presently authorized equipment2010-06-02
1710-1755 MHzOriginal Equipment2009-02-24

Exhibits

DocumentTypeAvailableFile
Internal PhotosInternal Photos2010-06-02PDF 234.5 KB
Internal PhotosInternal Photos2009-02-24PDF 133.8 KB
External PhotosExternal Photos2009-02-24PDF 160.7 KB
Label InfoID Label/Location Info2009-02-24PDF 48.9 KB
Functional DescriptionOperational Description2009-02-24PDF 39.7 KB
Test Setup PhotosTest Setup Photos2009-02-24PDF 207.1 KB
Test ReportTest Report2010-06-02PDF 290.3 KB
Test ReportTest Report2009-02-24PDF 308.7 KB
Authorization LetterCover Letter(s)2010-06-02PDF 33.2 KB
Class II Change LetterCover Letter(s)2010-06-02PDF 16.8 KB
Authorization LetterCover Letter(s)2009-02-24PDF 43.6 KB
Confidential RequestCover Letter(s)2009-02-24PDF 38.2 KB
Revised Confidential RequestCover Letter(s)2009-02-24PDF 40.8 KB
MPE PredictionRF Exposure Info2009-02-24PDF 24.1 KB
Tune up ProcedureParts List/Tune Up Info2009-02-24PDF 17.5 KB

Application Information

Application IDkaJ1+inC+18y7gT1x2Ns8A==
Final Action Date2010-06-02
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0007784689
Model-MR1718
Frequency Range1710-1755 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionBI-DIRECTIONAL AMPLIFIER
Responsible PartyMichael Shumate, Director, North American Operations, Michael.Shumate@Commscope.com , 919 329-8940
Test FirmMike Cantwell, Nemko Dallas, Inc., mike.cantwell@nemko.com , 972-436-9600
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsThe antenna(s)used for this transmitter (repeater) must be fixed-mounted on indoor or outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).

Applications

Application IDDatePurpose
kaJ1+inC+18y7gT1x2Ns8A==2010-06-02Class II permissive change or modification of presently authorized equipment
5DVqdbFb2mk69CJHIfgZ1Q==2009-02-24Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
1710-1755 MHz0.158AmpF9W27
2110-2155 MHz0.158AmpF9W27

Grants

TCB Grant - Application kaJ1+inC+18y7gT1x2Ns8A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 06/02/2010

Application Dated: 06/02/2010
Andrew Wireless Innovations Group
620 North Greenfield Parkway
Garner, NC 27529
 
Attention: Michael Shumate , Director, North American Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BCR-MR1718
Name of Grantee:  Andrew Wireless Innovations Group
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: BI-DIRECTIONAL AMPLIFIER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 1710.0  -  1755.0 0.158  Amp F9W
27 2110.0  -  2155.0 0.158  Amp F9W

The antenna(s)used for this transmitter (repeater) must be fixed-mounted on indoor or outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).

EAS Grant - Application kaJ1+inC+18y7gT1x2Ns8A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Andrew Wireless Innovations Group
620 North Greenfield Parkway
Garner, NC 27529
United States
  Date of Grant: 06/02/2010

Application Dated: 06/02/2010
 
Attention: Michael Shumate , Director, North American Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BCR-MR1718
Name of Grantee:  Andrew Wireless Innovations Group
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: BI-DIRECTIONAL AMPLIFIER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 1710.0  -  1755.0 0.158  Amp F9W
27 2110.0  -  2155.0 0.158  Amp F9W

The antenna(s)used for this transmitter (repeater) must be fixed-mounted on indoor or outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).



TCB Grant - Application 5DVqdbFb2mk69CJHIfgZ1Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 02/24/2009

Application Dated: 02/12/2009
Andrew Wireless Innovations Group
620 North Greenfield Parkway
Garner, NC 27529
 
Attention: Michael Shumate , Director, North American Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BCR-MR1718
Name of Grantee:  Andrew Wireless Innovations Group
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: BI-DIRECTIONAL AMPLIFIER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 1710.0  -  1755.0 0.158  Amp F9W
27 2110.0  -  2155.0 0.158  Amp F9W

The antenna(s)used for this transmitter (repeater) must be fixed-mounted on indoor or outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).

EAS Grant - Application 5DVqdbFb2mk69CJHIfgZ1Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Andrew Wireless Innovations Group
620 North Greenfield Parkway
Garner, NC 27529
United States
  Date of Grant: 02/24/2009

Application Dated: 02/12/2009
 
Attention: Michael Shumate , Director, North American Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BCR-MR1718
Name of Grantee:  Andrew Wireless Innovations Group
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: BI-DIRECTIONAL AMPLIFIER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 1710.0  -  1755.0 0.158  Amp F9W
27 2110.0  -  2155.0 0.158  Amp F9W

The antenna(s)used for this transmitter (repeater) must be fixed-mounted on indoor or outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).



Mail To: