FCC ID BCR-MR8018

BI-DIRECTIONAL AMPLIFIER

by Andrew Wireless Innovations Group

Grantee Code: BCR   Product Code: MR8018
Latest application date: 2010-06-02

FCC ID Device Details

FCC IDBCR-MR8018
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeBCR
Product CodeMR8018
Applicant BusinessAndrew Wireless Innovations Group 🇺🇸
Related Domains commscope.com
Equipment ClassBI-DIRECTIONAL AMPLIFIER
Test FirmNemko Dallas, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
806-824 MHzClass II permissive change or modification of presently authorized equipment2010-06-02
806-824 MHzOriginal Equipment2009-03-04

Exhibits

DocumentTypeAvailableFile
Internal PhotosInternal Photos2010-06-02PDF 180.8 KB
Internal PhotosInternal Photos2009-03-04PDF 133.8 KB
External PhotosExternal Photos2009-03-04PDF 160.7 KB
Label InfoID Label/Location Info2009-03-04PDF 57.7 KB
Operational DescriptionOperational Description2009-03-04PDF 39.7 KB
Test Setup PhotosTest Setup Photos2009-03-04PDF 207.1 KB
Test ReportTest Report2010-06-02PDF 564.1 KB
Test ReportTest Report2009-03-04PDF 311 KB
Authorization LetterCover Letter(s)2010-06-02PDF 33.2 KB
Class II Change LetterCover Letter(s)2010-06-02PDF 17.4 KB
Authorization LetterCover Letter(s)2009-03-04PDF 43.6 KB
Confidential RequestCover Letter(s)2009-03-04PDF 38.2 KB
REV Confidential RequestCover Letter(s)2009-03-04PDF 40.8 KB
MPE PredictionRF Exposure Info2009-03-04PDF 20.9 KB
Tune up ProcedureParts List/Tune Up Info2009-03-04PDF 18.7 KB

Application Information

Application ID5EU5YdWDFJSnPKV9qdADiQ==
Final Action Date2010-06-02
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0007784689
Model-MR8018
Frequency Range806-824 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionBI-DIRECTIONAL AMPLIFIER
Responsible PartyMichael Shumate, Director, North American Operations, Michael.Shumate@Commscope.com , 919 329-8940
Test FirmMike Cantwell, Nemko Dallas, Inc., mike.cantwell@nemko.com , 972-436-9600
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsThe antenna(s)used for this transmitter (repeater) must be fixed-mounted on indoor or outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). Note 1: F1D, F3E, D7W

Applications

Application IDDatePurpose
5EU5YdWDFJSnPKV9qdADiQ==2010-06-02Class II permissive change or modification of presently authorized equipment
qQPDOpxXa2OjODZUBkpLww==2009-03-04Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
806-824 MHz0.158AmpNOTE 19
851-869 MHz0.158AmpNOTE 19

Grants

TCB Grant - Application qQPDOpxXa2OjODZUBkpLww==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 03/04/2009

Application Dated: 03/03/2009
Andrew Wireless Innovations Group
620 North Greenfield Parkway
Garner, NC 27529
 
Attention: Michael Shumate , Director, North American Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BCR-MR8018
Name of Grantee:  Andrew Wireless Innovations Group
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: BI-DIRECTIONAL AMPLIFIER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 806.0  -  824.0 0.158  Amp NOTE 1
90 851.0  -  869.0 0.158  Amp NOTE 1

The antenna(s)used for this transmitter (repeater) must be fixed-mounted on indoor or outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).

Note 1: F1D, F3E, D7W


EAS Grant - Application qQPDOpxXa2OjODZUBkpLww==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Andrew Wireless Innovations Group
620 North Greenfield Parkway
Garner, NC 27529
United States
  Date of Grant: 03/04/2009

Application Dated: 03/03/2009
 
Attention: Michael Shumate , Director, North American Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BCR-MR8018
Name of Grantee:  Andrew Wireless Innovations Group
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: BI-DIRECTIONAL AMPLIFIER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 806.0  -  824.0 0.158  Amp NOTE 1
90 851.0  -  869.0 0.158  Amp NOTE 1

The antenna(s)used for this transmitter (repeater) must be fixed-mounted on indoor or outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).

Note 1: F1D, F3E, D7W



TCB Grant - Application 5EU5YdWDFJSnPKV9qdADiQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 06/02/2010

Application Dated: 06/02/2010
Andrew Wireless Innovations Group
620 North Greenfield Parkway
Garner, NC 27529
 
Attention: Michael Shumate , Director, North American Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BCR-MR8018
Name of Grantee:  Andrew Wireless Innovations Group
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: BI-DIRECTIONAL AMPLIFIER
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 806.0  -  824.0 0.158  Amp NOTE 1
90 851.0  -  869.0 0.158  Amp NOTE 1

The antenna(s)used for this transmitter (repeater) must be fixed-mounted on indoor or outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).

Note 1: F1D, F3E, D7W


EAS Grant - Application 5EU5YdWDFJSnPKV9qdADiQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Andrew Wireless Innovations Group
620 North Greenfield Parkway
Garner, NC 27529
United States
  Date of Grant: 06/02/2010

Application Dated: 06/02/2010
 
Attention: Michael Shumate , Director, North American Operations

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BCR-MR8018
Name of Grantee:  Andrew Wireless Innovations Group
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: BI-DIRECTIONAL AMPLIFIER
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 806.0  -  824.0 0.158  Amp NOTE 1
90 851.0  -  869.0 0.158  Amp NOTE 1

The antenna(s)used for this transmitter (repeater) must be fixed-mounted on indoor or outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3).

Note 1: F1D, F3E, D7W



Mail To: