FCC ID BEJ-MIB3OIVR-E01
Car Navigation
by LG Electronics USA, Inc.
Grantee Code: BEJ Product Code: MIB3OIVRE01
Latest application date: 2025-07-03
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2025-07-03 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2025-07-03 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-07-03 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2023-05-25 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-05-25 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2023-05-25 |
| 2412-2462 MHz | Original Equipment | 2022-11-29 |
| 5180-5240 MHz | Original Equipment | 2022-11-29 |
| 2402-2480 MHz | Original Equipment | 2022-11-29 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2025-07-03 | PDF 3.4 MB |
| User manual | Users Manual | 2023-11-22 | PDF 3.1 MB |
| User manual | Users Manual | 2023-05-28 | PDF 3 MB |
| user manual | Users Manual | 2023-05-28 | PDF 3 MB |
| Internal Photos | Internal Photos | 2025-12-30 | PDF 2 MB |
| Internal photos | Internal Photos | 2023-11-22 | PDF 2 MB |
| Internal Photos | Internal Photos | 2023-05-28 | PDF 501.7 KB |
| Internal photo | Internal Photos | 2023-05-28 | PDF 2 MB |
| lnternal Photos_Revision 01 | Internal Photos | 2023-05-28 | PDF 2 MB |
| External Photos | External Photos | 2025-12-30 | PDF 1.1 MB |
| External photos | External Photos | 2023-11-22 | PDF 1.1 MB |
| External Photo | External Photos | 2023-05-28 | PDF 1.2 MB |
| External photo | External Photos | 2023-05-28 | PDF 1.2 MB |
| EMF | External Photos | 2022-11-29 | PDF 250 KB |
| FCC Letter of Authorization Rev 2.0 | External Photos | 2022-11-29 | PDF 17.3 KB |
| Label and Location | ID Label/Location Info | 2025-07-03 | PDF 514.9 KB |
| Label | ID Label/Location Info | 2023-05-25 | PDF 514.9 KB |
| Label and Location | ID Label/Location Info | 2022-11-29 | PDF 501.7 KB |
| Label and location | ID Label/Location Info | 2022-11-29 | PDF 501.7 KB |
| LabelandLocation | ID Label/Location Info | 2022-11-29 | PDF 501.7 KB |
| Test Setup photos | Test Setup Photos | 2025-12-30 | PDF 233.9 KB |
| Test Setup Photos | Test Setup Photos | 2023-05-28 | PDF 1.4 MB |
| SAR Test Report | RF Exposure Info | 2025-07-03 | PDF 3.7 MB |
| Antenna specification | Test Report | 2023-05-25 | PDF 411.8 KB |
| Antenna Spec Chip | Test Report | 2022-11-29 | PDF 411.8 KB |
| Antenna Spec PCB | Test Report | 2022-11-29 | PDF 358.3 KB |
| Antenna SpecificationPCB | Test Report | 2022-11-29 | PDF 358.3 KB |
| Antenna SpecificationPCB | Test Report | 2022-11-29 | PDF 411.8 KB |
| LGElectronics | Test Report | 2022-11-29 | PDF 1.1 MB |
| LGElectronicsInc. | Test Report | 2022-11-29 | PDF 785.3 KB |
| LGElectronicsInc. | Test Report | 2022-11-29 | PDF 1.4 MB |
| Test Report1 | Test Report | 2022-11-29 | PDF 3.3 MB |
| Test Report1 | Test Report | 2022-11-29 | PDF 3.7 MB |
| Test Report1 | Test Report | 2022-11-29 | PDF 4.5 MB |
| Test Report2 | Test Report | 2022-11-29 | PDF 3.3 MB |
| Test Report2 | Test Report | 2022-11-29 | PDF 3.7 MB |
| Test Report2 | Test Report | 2022-11-29 | PDF 4.4 MB |
| Test Report3 | Test Report | 2022-11-29 | PDF 5.2 MB |
| Test Report4 | Test Report | 2022-11-29 | PDF 4.5 MB |
| Test Report5 | Test Report | 2022-11-29 | PDF 4.6 MB |
| Covered Equipment Attestation | Attestation Statements | 2025-07-03 | PDF 70.4 KB |
| U.S. Agent Designation Attestation | Attestation Statements | 2025-07-03 | PDF 73.4 KB |
| Covered equipment attestation | Attestation Statements | 2023-05-25 | PDF 67.3 KB |
| US agent attestation | Attestation Statements | 2023-05-25 | PDF 71.5 KB |
| Agent Authorization Letter | Cover Letter(s) | 2025-07-03 | PDF 39.4 KB |
| C2PC Request Letter | Cover Letter(s) | 2025-07-03 | PDF 18.5 KB |
| Confidentiality Letter | Cover Letter(s) | 2025-07-03 | PDF 132.6 KB |
| Cover Letter | Cover Letter(s) | 2023-05-25 | PDF 62.3 KB |
| Cover letter | Cover Letter(s) | 2023-05-25 | PDF 131.2 KB |
| FCC Letter of Authorization Rev 2.0 | Cover Letter(s) | 2022-11-29 | PDF 17.3 KB |
| FCC Short_Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 2022-11-29 | PDF 71.3 KB |
| FCC Software Configuration Control Declaration Rev1.0 | Cover Letter(s) | 2022-11-29 | PDF 62 KB |
| RF Exposure | RF Exposure Info | 2023-05-25 | PDF 288.6 KB |
| EMF | RF Exposure Info | 2022-11-29 | PDF 250 KB |
| Block Metadata only | Block Diagram | PDF 420.6 KB | |
| SCH Metadata only | Schematics | PDF 5.8 MB | |
| SCH2 Metadata only | Schematics | PDF 4.1 MB | |
| OP Metadata only | Operational Description | PDF 4.7 MB | |
| Operational Description Metadata only | Operational Description | PDF 4.7 MB | |
| SOFTWARE SECURITY REQUIREMENTS Metadata only | SDR Software/Security Inf | PDF 150.5 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 821.8 KB | |
| Tun Up Information Metadata only | Parts List/Tune Up Info | PDF 44.2 KB |
Application Information
| Application ID | NE/Munb3EUKXVuRtuf1dqA== |
|---|---|
| Final Action Date | 2025-07-03 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0023476120 |
| Model | MIB3OIVR-E01 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Car Navigation |
| Responsible Party | Heejae Cho, Team leader, LGEUS Regulatory and Enviroment, heejae.cho@lge.com  , 201-470-2696 |
| Test Firm | Ki Hong Nam, ONETECH Corp., kihong.nam@onetech.co.kr  , 82-31-799-9580 |
| TCB Email | TCB@nemko.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 12/30/2025 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II permissive change: Device must operate with the minimum 4 cm separation distance evaluated for RF exposure compliance as described in this filling. End-users must be informed of the operating requirements for satisfying RF exposure compliance. Class II permissive change: The highest reported SAR for body and extremity exposure conditions are 0.12 W/kg and 0.077 W/kg, respectively. The highest reported SAR for simultaneous transmission of body and extremity exposure conditions are 0.66 W/kg and 0.35 W/kg, respectively. End-users must be informed of the operating requirements for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| NE/Munb3EUKXVuRtuf1dqA== | 2025-07-03 | Class II permissive change or modification of presently authorized equipment |
| EoWQK3X9bH0AoKPLpMiWjA== | 2025-07-03 | Class II permissive change or modification of presently authorized equipment |
| 5vxfWrd0tfNrGlFVl1OxKA== | 2025-07-03 | Class II permissive change or modification of presently authorized equipment |
| eEp54ethqGdsBTu4nhCVaw== | 2023-05-25 | Class II permissive change or modification of presently authorized equipment |
| MscyTOR8+NnqRoZ6nwKnjA== | 2023-05-25 | Class II permissive change or modification of presently authorized equipment |
| 3pEZwmlBtA4R7l5/PVRRDA== | 2023-05-25 | Class II permissive change or modification of presently authorized equipment |
| U8Swc31ssZsfKJpW3Rh/8Q== | 2022-11-29 | Original Equipment |
| TbSRYJ2CgAomzsd87YE9Pw== | 2022-11-29 | Original Equipment |
| 5orMl4N+fV0OR6n4oyJ5MA== | 2022-11-29 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application U8Swc31ssZsfKJpW3Rh/8Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 11/29/2022 Application Dated: 11/29/2022 |
| LG Electronics USA |
| 111 Sylvan Avenue |
| North Building |
| Englewood Cliffs, NJ 07632 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJ-MIB3OIVR-E01 |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Digital Transmission System |
| Notes: | Car Navigation |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.00896 |
| Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application U8Swc31ssZsfKJpW3Rh/8Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs, NJ 07632 United States |
Date of Grant: 11/29/2022 Application Dated: 11/29/2022 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJ-MIB3OIVR-E01 |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Digital Transmission System |
| Notes: | Car Navigation |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.00896 |
| Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 11/29/2022 Application Dated: 11/29/2022 |
| LG Electronics USA |
| 111 Sylvan Avenue |
| North Building |
| Englewood Cliffs, NJ 07632 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJ-MIB3OIVR-E01 |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Car Navigation |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.01622 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.03389 |
| Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application TbSRYJ2CgAomzsd87YE9Pw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs, NJ 07632 United States |
Date of Grant: 11/29/2022 Application Dated: 11/29/2022 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJ-MIB3OIVR-E01 |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Car Navigation |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.01622 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.03389 |
| Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 07/03/2025 Application Dated: 07/03/2025 |
| LG Electronics USA, Inc. |
| 111 Sylvan Avenue |
| North Building |
| Englewood Cliffs, NJ 07632 |
| Attention: Heejae Cho , Team leader, LGEUS Regulatory and Enviroment |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJ-MIB3OIVR-E01 |
| Name of Grantee: | LG Electronics USA, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Car Navigation |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.00896 |
| Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II permissive change: Device must operate with the minimum 4 cm separation distance evaluated for RF exposure compliance as described in this filling. End-users must be informed of the operating requirements for satisfying RF exposure compliance. Class II permissive change: The highest reported SAR for body and extremity exposure conditions are 0.12 W/kg and 0.077 W/kg, respectively. The highest reported SAR for simultaneous transmission of body and extremity exposure conditions are 0.66 W/kg and 0.35 W/kg, respectively. End-users must be informed of the operating requirements for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application MscyTOR8+NnqRoZ6nwKnjA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 05/25/2023 Application Dated: 05/25/2023 |
| LG Electronics USA, Inc. |
| 111 Sylvan Avenue |
| North Building |
| Englewood Cliffs, NJ 07632 |
| Attention: Heejae Cho , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJ-MIB3OIVR-E01 |
| Name of Grantee: | LG Electronics USA, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Car Navigation |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00177 |
| Output power listed is maximum combined conducted power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. Class II permissive change: Device must operate with the minimum 4 cm separation distance evaluated for RF exposure compliance as described in this filing. End-users must be informed of the operating requirements for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application MscyTOR8+NnqRoZ6nwKnjA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LG Electronics USA, Inc. 111 Sylvan Avenue North Building Englewood Cliffs, NJ 07632 United States |
Date of Grant: 05/25/2023 Application Dated: 05/25/2023 |
| Attention: Heejae Cho , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJ-MIB3OIVR-E01 |
| Name of Grantee: | LG Electronics USA, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Car Navigation |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00177 |
| Output power listed is maximum combined conducted power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. Class II permissive change: Device must operate with the minimum 4 cm separation distance evaluated for RF exposure compliance as described in this filing. End-users must be informed of the operating requirements for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 07/03/2025 Application Dated: 07/03/2025 |
| LG Electronics USA, Inc. |
| 111 Sylvan Avenue |
| North Building |
| Englewood Cliffs, NJ 07632 |
| Attention: Heejae Cho , Team leader, LGEUS Regulatory and Enviroment |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJ-MIB3OIVR-E01 |
| Name of Grantee: | LG Electronics USA, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Car Navigation |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.01622 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.03389 |
| Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. Class II permissive change: Device must operate with the minimum 4 cm separation distance evaluated for RF exposure compliance as described in this filling. End-users must be informed of the operating requirements for satisfying RF exposure compliance. Class II permissive change: The highest reported SAR for body and extremity exposure conditions are 0.58 W/kg and 0.30 W/kg, respectively. The highest reported SAR for simultaneous transmission of body and extremity exposure conditions are 0.66 W/kg and 0.35 W/kg, respectively. End-users must be informed of the operating requirements for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application eEp54ethqGdsBTu4nhCVaw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 05/25/2023 Application Dated: 05/25/2023 |
| LG Electronics USA, Inc. |
| 111 Sylvan Avenue |
| North Building |
| Englewood Cliffs, NJ 07632 |
| Attention: Heejae Cho , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJ-MIB3OIVR-E01 |
| Name of Grantee: | LG Electronics USA, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Car Navigation |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.00896 |
| Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II permissive change: Device must operate with the minimum 4 cm separation distance evaluated for RF exposure compliance as described in this filing. End-users must be informed of the operating requirements for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application eEp54ethqGdsBTu4nhCVaw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LG Electronics USA, Inc. 111 Sylvan Avenue North Building Englewood Cliffs, NJ 07632 United States |
Date of Grant: 05/25/2023 Application Dated: 05/25/2023 |
| Attention: Heejae Cho , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJ-MIB3OIVR-E01 |
| Name of Grantee: | LG Electronics USA, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Car Navigation |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.00896 |
| Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II permissive change: Device must operate with the minimum 4 cm separation distance evaluated for RF exposure compliance as described in this filing. End-users must be informed of the operating requirements for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 07/03/2025 Application Dated: 07/03/2025 |
| LG Electronics USA, Inc. |
| 111 Sylvan Avenue |
| North Building |
| Englewood Cliffs, NJ 07632 |
| Attention: Heejae Cho , Team leader, LGEUS Regulatory and Enviroment |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJ-MIB3OIVR-E01 |
| Name of Grantee: | LG Electronics USA, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Car Navigation |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00177 |
| Power listed is the maximum conducted output power. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class II permissive change: Device must operate with the minimum 4 cm separation distance evaluated for RF exposure compliance as described in this filling. End-users must be informed of the operating requirements for satisfying RF exposure compliance. Class II permissive change: The highest reported SAR for body and extremity exposure conditions are 0.083 W/kg and 0.033 W/kg, respectively. The highest reported SAR for simultaneous transmission of Body and extremity exposure conditions are 0.66 W/Kg and 0.35 W/Kg respectively. End-users must be informed of the operating requirements for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application 5orMl4N+fV0OR6n4oyJ5MA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 11/29/2022 Application Dated: 11/29/2022 |
| LG Electronics USA |
| 111 Sylvan Avenue |
| North Building |
| Englewood Cliffs, NJ 07632 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJ-MIB3OIVR-E01 |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Car Navigation |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00177 |
| Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 5orMl4N+fV0OR6n4oyJ5MA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs, NJ 07632 United States |
Date of Grant: 11/29/2022 Application Dated: 11/29/2022 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJ-MIB3OIVR-E01 |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Car Navigation |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00177 |
| Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 05/25/2023 Application Dated: 05/25/2023 |
| LG Electronics USA, Inc. |
| 111 Sylvan Avenue |
| North Building |
| Englewood Cliffs, NJ 07632 |
| Attention: Heejae Cho , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJ-MIB3OIVR-E01 |
| Name of Grantee: | LG Electronics USA, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Car Navigation |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.01622 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.03389 |
| Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. Class II permissive change: Device must operate with the minimum 4 cm separation distance evaluated for RF exposure compliance as described in this filing. End-users must be informed of the operating requirements for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 3pEZwmlBtA4R7l5/PVRRDA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LG Electronics USA, Inc. 111 Sylvan Avenue North Building Englewood Cliffs, NJ 07632 United States |
Date of Grant: 05/25/2023 Application Dated: 05/25/2023 |
| Attention: Heejae Cho , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJ-MIB3OIVR-E01 |
| Name of Grantee: | LG Electronics USA, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Car Navigation |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.01622 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.03389 |
| Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. Class II permissive change: Device must operate with the minimum 4 cm separation distance evaluated for RF exposure compliance as described in this filing. End-users must be informed of the operating requirements for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |