FCC ID BEJ-WB1NP8
Bluetooth Adapter Card
by LG Electronics USA
Grantee Code: BEJ Product Code: WB1NP8
Latest application date: 2017-12-14
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2017-12-14 |
| 2402-2480 MHz | Original Equipment | 2017-12-14 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual Part 1 | Users Manual | 2018-06-12 | PDF 1.3 MB |
| User Manual Part 2 | Users Manual | 2018-06-12 | PDF 2.8 MB |
| Internal Photos | Internal Photos | 2018-06-12 | PDF 410.8 KB |
| External Photos | External Photos | 2018-06-12 | PDF 462.6 KB |
| Label Sample Location | ID Label/Location Info | 2017-12-14 | PDF 203.4 KB |
| Test Setup Photos | Test Setup Photos | 2018-06-12 | PDF 593.6 KB |
| Test Report DSS Part 1 | Test Report | 2017-12-14 | PDF 2.6 MB |
| Test Report DSS Part 2 | Test Report | 2017-12-14 | PDF 3.8 MB |
| Test Report DTS LE | Test Report | 2017-12-14 | PDF 2.7 MB |
| Authorization Letter | Cover Letter(s) | 2017-12-14 | PDF 117.4 KB |
| Confidentiality Request | Cover Letter(s) | 2017-12-14 | PDF 16.4 KB |
| Modular Approval Letter | Cover Letter(s) | 2017-12-14 | PDF 112.9 KB |
| MPE Calculation | RF Exposure Info | 2017-12-14 | PDF 78.7 KB |
| Block Diagram Metadata only | Block Diagram | PDF 42 KB | |
| Schematics Metadata only | Schematics | PDF 60.7 KB | |
| Schematics Part Location Metadata only | Schematics | PDF 72 KB | |
| Antenna Specification OpDes Metadata only | Operational Description | PDF 315.3 KB | |
| Operational Description Metadata only | Operational Description | PDF 1.6 MB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 62 KB |
Application Information
| Application ID | Lp10bAFwVS+XNNwGrdcuSw== |
|---|---|
| Final Action Date | 2017-12-14 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0023476120 |
| Model | WB1NP8 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Bluetooth Adapter Card |
| Responsible Party | Sung Soo Kim, Director, Regulatory and Environmental Affairs, sungsoo.kim@lge.com  , 201-266-2215 |
| Test Firm | Lee Su-jeong, DT&C; Co., Ltd., gungmin0524@dtnc.net  , 82-31-321-2664 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 06/12/2018 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31 (h) and 15.31 (k). |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Lp10bAFwVS+XNNwGrdcuSw== | 2017-12-14 | Original Equipment |
| HSC3e3xw5eBnXE423vm5zg== | 2017-12-14 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application Lp10bAFwVS+XNNwGrdcuSw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 12/14/2017 Application Dated: 12/14/2017 |
| LG Electronics USA |
| 111 Sylvan Avenue |
| North Building |
| Englewood Cliffs, NJ 07632 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJ-WB1NP8 |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Adapter Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 |
| Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31 (h) and 15.31 (k). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Lp10bAFwVS+XNNwGrdcuSw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs, NJ 07632 United States |
Date of Grant: 12/14/2017 Application Dated: 12/14/2017 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJ-WB1NP8 |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Adapter Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 |
| Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31 (h) and 15.31 (k). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 12/14/2017 Application Dated: 12/13/2017 |
| LG Electronics USA |
| 111 Sylvan Avenue |
| North Building |
| Englewood Cliffs, NJ 07632 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJ-WB1NP8 |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth Adapter Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 |
| Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31 (h) and 15.31 (k). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application HSC3e3xw5eBnXE423vm5zg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs, NJ 07632 United States |
Date of Grant: 12/14/2017 Application Dated: 12/13/2017 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJ-WB1NP8 |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth Adapter Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 |
| Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31 (h) and 15.31 (k). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |