FCC ID BEJ-WB2NB8

Bluetooth Module

by LG Electronics USA

Grantee Code: BEJ   Product Code: WB2NB8
Latest application date: 2017-11-24

FCC ID Device Details

FCC IDBEJ-WB2NB8
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeBEJ
Product CodeWB2NB8
Applicant BusinessLG Electronics USA 🇺🇸
Related Domains lge.com sgs.com
Equipment ClassBluetooth Module
Test FirmSGS Korea Co., Ltd

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2017-11-24
2402-2480 MHzOriginal Equipment2017-11-24

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2018-05-23PDF 1.2 MB
Internal PhotosInternal Photos2018-05-23PDF 401.8 KB
External PhotosExternal Photos2018-05-23PDF 565.8 KB
LabelID Label/Location Info2017-11-24PDF 120.8 KB
Test Setup PhotoTest Setup Photos2018-05-23PDF 1.2 MB
Test ReportTest Report2017-11-24PDF 2.1 MB
Test ReportTest Report2017-11-24PDF 2.1 MB
Authorization LetterCover Letter(s)2017-11-24PDF 457.3 KB
Confidentially LetterCover Letter(s)2017-11-24PDF 357 KB
Cover LetterCover Letter(s)2017-11-24PDF 420.5 KB
Moular cover letterCover Letter(s)2017-11-24PDF 420.5 KB
RF Exposure InfoRF Exposure Info2017-11-24PDF 425.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 125.6 KB
Schematics Metadata onlySchematicsPDF 91 KB
Operational Description Metadata onlyOperational DescriptionPDF 71.8 KB

Application Information

Application IDyX7p7E7MRhJtW5erLDFqoQ==
Final Action Date2017-11-24
Application PurposeOriginal Equipment
Applicant FRN0023476120
ModelWB2NB8
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionBluetooth Module
Responsible PartySung Soo Kim, Director, Regulatory and Environmental Affairs, sungsoo.kim@lge.com , 201-266-2215
Technical ContactHyunchae You, SGS Korea Co., Ltd., hyunchae.you@sgs.com , 82-31-688-0902
Non-Technical ContactYOUNGA KUM, SGS Korea Co., Ltd., younga.kum@sgs.com , 82-31-428-5981
Test FirmPark Heejin, SGS Korea Co., Ltd, heejin.park@sgs.com , +82-31-428-5709
TCB EmailUSCTS.TCB@SGS.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date05/23/2018
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is conducted. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 2.49 dBi for satisfying RF exposure compliance according to as defined in 2.1091.

Applications

Application IDDatePurpose
yX7p7E7MRhJtW5erLDFqoQ==2017-11-24Original Equipment
XqVuHgaBpBUWlFNFDIiAaw==2017-11-24Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.004000015C

Grants

TCB Grant - Application yX7p7E7MRhJtW5erLDFqoQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 11/24/2017

Application Dated: 11/24/2017
LG Electronics USA
111 Sylvan Avenue
North Building
Englewood Cliffs, NJ 07632
 
Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BEJ-WB2NB8
Name of Grantee:  LG Electronics USA
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.004  

Power Output listed is conducted. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 2.49 dBi for satisfying RF exposure compliance according to as defined in 2.1091.

EAS Grant - Application yX7p7E7MRhJtW5erLDFqoQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LG Electronics USA
111 Sylvan Avenue North Building
Englewood Cliffs, NJ 07632
United States
  Date of Grant: 11/24/2017

Application Dated: 11/24/2017
 
Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BEJ-WB2NB8
Name of Grantee:  LG Electronics USA
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.004  

Power Output listed is conducted. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 2.49 dBi for satisfying RF exposure compliance according to as defined in 2.1091.



TCB Grant - Application XqVuHgaBpBUWlFNFDIiAaw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 11/24/2017

Application Dated: 11/24/2017
LG Electronics USA
111 Sylvan Avenue
North Building
Englewood Cliffs, NJ 07632
 
Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BEJ-WB2NB8
Name of Grantee:  LG Electronics USA
Equipment Class: Digital Transmission System
Notes: Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.004  

Power Output listed is conducted. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 2.49 dBi for satisfying RF exposure compliance according to as defined in 2.1091.

EAS Grant - Application XqVuHgaBpBUWlFNFDIiAaw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LG Electronics USA
111 Sylvan Avenue North Building
Englewood Cliffs, NJ 07632
United States
  Date of Grant: 11/24/2017

Application Dated: 11/24/2017
 
Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BEJ-WB2NB8
Name of Grantee:  LG Electronics USA
Equipment Class: Digital Transmission System
Notes: Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.004  

Power Output listed is conducted. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 2.49 dBi for satisfying RF exposure compliance according to as defined in 2.1091.



Mail To: