FCC ID BEJ9QK-DMPWMN5275
WLAN Adapter Card
by LG Electronics USA
Grantee Code: BEJ Product Code: 9QKDMPWMN5275
Latest application date: 2012-11-01
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Original Equipment | 2012-11-01 |
| 2412-2462 MHz | Original Equipment | 2012-11-01 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual(1101) | Users Manual | 2012-11-01 | PDF 242.9 KB |
| EUT External Photo | Internal Photos | 2012-11-01 | PDF 313.3 KB |
| EUT External Photo | External Photos | 2012-11-01 | PDF 313.3 KB |
| FCC ID & IC Label Format and Location | ID Label/Location Info | 2012-11-01 | PDF 144.9 KB |
| Test Setup Photo(15.247) | Test Setup Photos | 2012-11-01 | PDF 376.9 KB |
| Test Setup Photo(15.407) | Test Setup Photos | 2012-11-01 | PDF 435.5 KB |
| Test Report (15.247)(1101) | Test Report | 2012-11-01 | PDF 4 MB |
| Test Report (15.407)(1101) | Test Report | 2012-11-01 | PDF 2.4 MB |
| FCC Attestation Letter | Cover Letter(s) | 2012-11-01 | PDF 21.4 KB |
| FCC Request for Confidentiality | Cover Letter(s) | 2012-11-01 | PDF 19 KB |
| Module Approval Letter(1101) | Cover Letter(s) | 2012-11-01 | PDF 39 KB |
| MPE(1101) | RF Exposure Info | 2012-11-01 | PDF 53.8 KB |
Application Information
| Application ID | GKSRc61KkXmjc+5/vxwJHw== |
|---|---|
| Final Action Date | 2012-11-01 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0005875562 |
| Model | 9QK-DMPWMN5275 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | WLAN Adapter Card |
| Responsible Party | Jongchul Lee, Director, Standards & Compliance, jongchul.lee@lge.com  , 201-408-9181 |
| Technical Contact | Ben Cheng, AUDIX Technology Corporation, ben_cheng@audixtech.com  |
| Test Firm | Leon Liu, Audix Technology Corporation, leon@audixtech.com , 886-2-26092133 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is the maximum combined conducted output power. Client device per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device has a 20 MHz and 40 MHz Bandwidth for WLAN function and it contains 2.4G WLAN. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| GKSRc61KkXmjc+5/vxwJHw== | 2012-11-01 | Original Equipment |
| Dr3eU2pXvRn41TsaIPWqKg== | 2012-11-01 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application GKSRc61KkXmjc+5/vxwJHw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 11/01/2012 Application Dated: 11/01/2012 |
| LG Electronics USA |
| 1000 Sylvan Avenue |
| Englewood Cliffs, NJ 07632 |
| Attention: Jongchul Lee , Director, Standards & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJ9QK-DMPWMN5275 |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN Adapter Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.02177 |
| Power listed is the maximum combined conducted output power. Client device per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device has a 20 MHz and 40 MHz Bandwidth for WLAN function and it contains 2.4G WLAN. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application GKSRc61KkXmjc+5/vxwJHw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LG Electronics USA 1000 Sylvan Avenue Englewood Cliffs, NJ 07632 United States |
Date of Grant: 11/01/2012 Application Dated: 11/01/2012 |
| Attention: Jongchul Lee , Director, Standards & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJ9QK-DMPWMN5275 |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN Adapter Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.02177 |
| Power listed is the maximum combined conducted output power. Client device per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device has a 20 MHz and 40 MHz Bandwidth for WLAN function and it contains 2.4G WLAN. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 11/01/2012 Application Dated: 11/01/2012 |
| LG Electronics USA |
| 1000 Sylvan Avenue |
| Englewood Cliffs, NJ 07632 |
| Attention: Jongchul Lee , Director, Standards & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJ9QK-DMPWMN5275 |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN Adapter Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.21727 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.0877 |
| Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device has a 20 MHz and 40 MHz Bandwidth for WLAN function and it contains 5G WLAN. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Dr3eU2pXvRn41TsaIPWqKg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LG Electronics USA 1000 Sylvan Avenue Englewood Cliffs, NJ 07632 United States |
Date of Grant: 11/01/2012 Application Dated: 11/01/2012 |
| Attention: Jongchul Lee , Director, Standards & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJ9QK-DMPWMN5275 |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN Adapter Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.21727 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.0877 |
| Power listed is the maximum combined conducted output power. Client device without radar detection per section 15.202 definition. Device is 2x2 Spatial Multiplexing MIMO Module. Approval is limited to OEM installation only in mobile RF exposure configurations. Installation of this device in Portable RF exposure configurations requires a permissive change application or new filing. Compliance of this device in all final product configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This composite device is restricted to indoor only operations within the 5150-5250 MHz band. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device has a 20 MHz and 40 MHz Bandwidth for WLAN function and it contains 5G WLAN. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |