FCC ID BEJ9QK-WT0601

Audio Data Transceiver RF Module

by LG Electronics USA

Grantee Code: BEJ   Product Code: 9QKWT0601
Latest application date: 2006-03-15

FCC ID Device Details

FCC IDBEJ9QK-WT0601
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeBEJ
Product Code9QKWT0601
Applicant BusinessLG Electronics USA 🇺🇸
Related Domains lge.com
Equipment ClassAudio Data Transceiver RF Module
Test FirmAudix Technology Corporation

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2467 MHzOriginal Equipment2006-03-15

Exhibits

DocumentTypeAvailableFile
Users Manual ModuleUsers Manual2006-03-15PDF 395.3 KB
Internal PhotosInternal Photos2006-03-15PDF 776.9 KB
External PhotosExternal Photos2006-03-15PDF 776.9 KB
ID LabelID Label/Location Info2006-03-15PDF 190.6 KB
Operational DescriptionOperational Description2006-03-15PDF 271.6 KB
Test Setup PhotosTest Setup Photos2006-03-15PDF 759.7 KB
Test ReportTest Report2006-03-15PDF 2.5 MB
Authorization LetterCover Letter(s)2006-03-15PDF 57.6 KB
Modular Approval LetterCover Letter(s)2006-03-15PDF 48.2 KB
Request for ConfidentialityCover Letter(s)2006-03-15PDF 20.8 KB
TCB Q and ACover Letter(s)2006-03-15PDF 67 KB
MPERF Exposure Info2006-03-15PDF 10.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 78 KB
Schematics Metadata onlySchematicsPDF 226.6 KB

Application Information

Application IDtcGXnj3dmrQRNylaGGK8UA==
Final Action Date2006-03-15
Application PurposeOriginal Equipment
Applicant FRN0020917688
Model9QK-WT0601
Frequency Range2412-2467 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionAudio Data Transceiver RF Module
Responsible PartySung Soo Kim, Director, Regulatory and Environmental Affairs, sungsoo.kim@lge.com , 201-266-2215
Test FirmLeon Liu, Audix Technology Corporation, allen_wang@audixtech.com , 886-2-2600-99301
TCB Emailmike.kuo@ccsemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited modular approval. Output power listed is conducted. This device is approved to be installed in the grantee host products as documented in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installation of this device into other host products, requires the submission of a Class II permissive change application containing data demonstrating compliance for radiated spurious emissions, EIRP, and SAR if applicable, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device.

Applications

Application IDDatePurpose
tcGXnj3dmrQRNylaGGK8UA==2006-03-15Original Equipment

Equipment Authorization

FrequencyOutputRules
2412-2467 MHz0.119000015C

Grants

TCB Grant - Application tcGXnj3dmrQRNylaGGK8UA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 03/15/2006

Application Dated: 03/15/2006
LG Electronics USA
111 Sylvan Avenue
North Building
Englewood Cliffs, NJ 07632
 
Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BEJ9QK-WT0601
Name of Grantee:  LG Electronics USA
Equipment Class: Digital Transmission System
Notes: Audio Data Transceiver RF Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2467.0 0.119  

Limited modular approval. Output power listed is conducted. This device is approved to be installed in the grantee host products as documented in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installation of this device into other host products, requires the submission of a Class II permissive change application containing data demonstrating compliance for radiated spurious emissions, EIRP, and SAR if applicable, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device.

EAS Grant - Application tcGXnj3dmrQRNylaGGK8UA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LG Electronics USA
111 Sylvan Avenue North Building
Englewood Cliffs, NJ 07632
United States
  Date of Grant: 03/15/2006

Application Dated: 03/15/2006
 
Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BEJ9QK-WT0601
Name of Grantee:  LG Electronics USA
Equipment Class: Digital Transmission System
Notes: Audio Data Transceiver RF Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2467.0 0.119  

Limited modular approval. Output power listed is conducted. This device is approved to be installed in the grantee host products as documented in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installation of this device into other host products, requires the submission of a Class II permissive change application containing data demonstrating compliance for radiated spurious emissions, EIRP, and SAR if applicable, or new application if appropriate. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device.



Mail To: