FCC ID BEJ9ZS52055DA

ZigBee Connector

by LG Electronics USA

Grantee Code: BEJ   Product Code: 9ZS52055DA
Latest application date: 2017-02-13

Device Images

FCC ID Device Details

FCC IDBEJ9ZS52055DA
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeBEJ
Product Code9ZS52055DA
Applicant BusinessLG Electronics USA 🇺🇸
Related Domains lge.com audixtech.com
Equipment ClassZigBee Connector
Test FirmAudix Technology Corporation

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2405-2480 MHzClass II permissive change or modification of presently authorized equipment2017-02-13
2405-2480 MHzOriginal Equipment2017-01-22

Exhibits

DocumentTypeAvailableFile
User Manual Rev01-0117Users Manual2017-01-22PDF 1.1 MB
EUT Internal PhotoInternal Photos2017-02-13PDF 406.5 KB
EUT Internal Photo Rev01-0116Internal Photos2017-01-22PDF 342.5 KB
EUT External PhotoExternal Photos2017-02-13PDF 46.7 KB
EUT External PhotoExternal Photos2017-01-22PDF 77.4 KB
FCC ID, IC Label Format and LocationID Label/Location Info2017-01-22PDF 81.8 KB
Test Setup PhotoTest Setup Photos2017-02-13PDF 488.4 KB
Test Setup PhotoTest Setup Photos2017-01-22PDF 601.8 KB
Test Report Metadata onlyTest Report2017-02-13PDF 554 KB
Test Report Rev02-0213Test Report2017-02-13PDF 678.2 KB
Test Report Rev01-0117 Metadata onlyTest Report2017-01-22PDF 1.3 MB
Test Report Rev02-0120Test Report2017-01-22PDF 1.3 MB
ACB-FCC-Request for Confidentiality Metadata onlyCover Letter(s)2017-02-13PDF 31.3 KB
ACB-FCC-Request for Confidentiality Rev01-0213Cover Letter(s)2017-02-13PDF 31.2 KB
ACB-Form-FCC-Application-LettersCover Letter(s)2017-02-13PDF 24.9 KB
Letter of Class 2 Permissive Change FCC ID Metadata onlyCover Letter(s)2017-02-13PDF 190.3 KB
Letter of Class 2 Permissive Change FCC ID Rev02-0213Cover Letter(s)2017-02-13PDF 190.3 KB
ACB-FCC-Request for Confidentiality Rev01-0117Cover Letter(s)2017-01-22PDF 31.3 KB
ACB-Form-FCC-Application-LettersCover Letter(s)2017-01-22PDF 24.9 KB
MPERF Exposure Info2017-01-22PDF 151.8 KB
Confidential_Block Diagram Metadata onlyBlock DiagramPDF 179.6 KB
Confidential_Schematic Metadata onlySchematicsPDF 591 KB
Confidential_Schematic Metadata onlySchematicsPDF 59.3 KB
Antenna Report Metadata onlyOperational DescriptionPDF 157.7 KB
Confidential_Operational Description Rev02-0117 Metadata onlyOperational DescriptionPDF 536.1 KB
Confidential_Operational Description Rev03-0120 Metadata onlyOperational DescriptionPDF 542.2 KB

Application Information

Application IDt0QXE43d8MD3Pb4NLpNC1g==
Final Action Date2017-02-13
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0023476120
Model9ZS52055DA
Frequency Range2405-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionZigBee Connector
Responsible PartySung Soo Kim, Director, Regulatory and Environmental Affairs, sungsoo.kim@lge.com , 201-266-2215
AgentBen Ben Ben, AUDIX Technology Corporation
Technical ContactBen Cheng, AUDIX Technology Corporation, Ben_Cheng@audixtech.com , 886-2609-9301
Non-Technical ContactJarwei Wang, AUDIX Technology Corporation, Jarwei_wang@audixtech.com , 886-2609-9301
Test FirmLeon Liu, Audix Technology Corporation, leon@audixtech.com , 886-2-26092133
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change. C2PC Application to replace USB connector. Power Output listed is conducted. Power out of the device at the highest channel is reduced for band edge compliance reasons.The device has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
t0QXE43d8MD3Pb4NLpNC1g==2017-02-13Class II permissive change or modification of presently authorized equipment
4AAm/yyN/0lZxCjGsga3Hg==2017-01-22Original Equipment

Equipment Authorization

FrequencyOutputRules
2405-2480 MHz0.007709015C

Grants

TCB Grant - Application t0QXE43d8MD3Pb4NLpNC1g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 02/13/2017

Application Dated: 02/13/2017
LG Electronics USA
111 Sylvan Avenue
North Building
Englewood Cliffs, NJ 07632
 
Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BEJ9ZS52055DA
Name of Grantee:  LG Electronics USA
Equipment Class: Digital Transmission System
Notes: ZigBee Connector
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2480.0 0.007709  

Class II Permissive Change. C2PC Application to replace USB connector.

Power Output listed is conducted. Power out of the device at the highest channel is reduced for band edge compliance reasons.The device has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


EAS Grant - Application t0QXE43d8MD3Pb4NLpNC1g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LG Electronics USA
111 Sylvan Avenue North Building
Englewood Cliffs, NJ 07632
United States
  Date of Grant: 02/13/2017

Application Dated: 02/13/2017
 
Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BEJ9ZS52055DA
Name of Grantee:  LG Electronics USA
Equipment Class: Digital Transmission System
Notes: ZigBee Connector
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2480.0 0.007709  

Class II Permissive Change. C2PC Application to replace USB connector.

Power Output listed is conducted. Power out of the device at the highest channel is reduced for band edge compliance reasons.The device has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application 4AAm/yyN/0lZxCjGsga3Hg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 01/22/2017

Application Dated: 01/17/2017
LG Electronics USA
111 Sylvan Avenue
North Building
Englewood Cliffs, NJ 07632
 
Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BEJ9ZS52055DA
Name of Grantee:  LG Electronics USA
Equipment Class: Digital Transmission System
Notes: ZigBee Connector
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2480.0 0.007709  

Power Output listed is conducted. Power out of the device at the highest channel is reduced for band edge compliance reasons.The device has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application 4AAm/yyN/0lZxCjGsga3Hg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LG Electronics USA
111 Sylvan Avenue North Building
Englewood Cliffs, NJ 07632
United States
  Date of Grant: 01/22/2017

Application Dated: 01/17/2017
 
Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BEJ9ZS52055DA
Name of Grantee:  LG Electronics USA
Equipment Class: Digital Transmission System
Notes: ZigBee Connector
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2480.0 0.007709  

Power Output listed is conducted. Power out of the device at the highest channel is reduced for band edge compliance reasons.The device has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: