FCC ID BEJLGSBWAX12
RF Module
by LG Electronics USA
Grantee Code: BEJ Product Code: LGSBWAX12
Latest application date: 2021-02-22
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5955-7095 MHz | Original Equipment | 2021-02-22 |
| 2402-2480 MHz | Original Equipment | 2020-09-21 |
| 2402-2480 MHz | Original Equipment | 2020-09-21 |
| 5180-5240 MHz | Original Equipment | 2020-09-21 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| BEJLGSBWAX12_User Manual_WLAN 6 GHz Metadata only | Users Manual | 2021-08-21 | PDF 1.6 MB |
| BEJLGSBWAX12_User Manual_WLAN 6 GHz_rev.1 Metadata only | Users Manual | 2021-08-21 | PDF 1.6 MB |
| LGSBWAX12_User Manual_0222 | Users Manual | 2021-08-21 | PDF 1.6 MB |
| User Manual | Users Manual | 2021-03-20 | PDF 1.6 MB |
| BEJLGSBWAX12_INTERNAL PHOTO | Internal Photos | 2021-08-21 | PDF 622.6 KB |
| Internal Photos | Internal Photos | 2021-03-20 | PDF 1 MB |
| BEJLGSBWAX12_EXTERNAL PHOTO | External Photos | 2021-08-21 | PDF 856.2 KB |
| External Photos | External Photos | 2021-03-20 | PDF 1.5 MB |
| BEJLGSBWAX12_Label Information | ID Label/Location Info | 2021-02-22 | PDF 254.4 KB |
| Label Info | ID Label/Location Info | 2020-09-21 | PDF 254.4 KB |
| LGSBWAX12 Setup Photo Annex A | Test Setup Photos | 2021-08-21 | PDF 2.5 MB |
| Test Setup Photo | Test Setup Photos | 2021-03-20 | PDF 3.2 MB |
| Test Setup Photos | Test Setup Photos | 2021-03-20 | PDF 3.2 MB |
| LGSBWAX12 MPE Test Report | RF Exposure Info | 2021-02-22 | PDF 409.1 KB |
| LGSBWAX12 [UNII 6e] 802.11ax Plot Annex B_Part1 Metadata only | Test Report | 2021-02-22 | PDF 5.4 MB |
| LGSBWAX12 [UNII 6e] 802.11ax Plot Annex B_Part2 Metadata only | Test Report | 2021-02-22 | PDF 1.3 MB |
| LGSBWAX12 [UNII 6e] 802.11ax Plot Annex B_R1_Part1 | Test Report | 2021-02-22 | PDF 5.5 MB |
| LGSBWAX12 [UNII 6e] 802.11ax Plot Annex B_R1_Part2 | Test Report | 2021-02-22 | PDF 946.5 KB |
| LGSBWAX12 [UNII 6e] 802.11ax Test Report Metadata only | Test Report | 2021-02-22 | PDF 1.8 MB |
| LGSBWAX12 [UNII 6e] 802.11ax Test Report_Rev01 Metadata only | Test Report | 2021-02-22 | PDF 1.4 MB |
| LGSBWAX12 [UNII 6e] 802.11ax Test Report_Rev02 | Test Report | 2021-02-22 | PDF 2.4 MB |
| BT LE Test Report | Test Report | 2020-09-21 | PDF 3.4 MB |
| DFS Test Report | Test Report | 2020-09-21 | PDF 959.1 KB |
| DTS Test Report 802.11ax Test Report Part 1 | Test Report | 2020-09-21 | PDF 5.3 MB |
| DTS Test Report 802.11ax Test Report Part 2 | Test Report | 2020-09-21 | PDF 1.1 MB |
| DTS Test Report Part 1 | Test Report | 2020-09-21 | PDF 5.3 MB |
| DTS Test Report Part 2 | Test Report | 2020-09-21 | PDF 4.3 MB |
| MPE Test Report | RF Exposure Info | 2020-09-21 | PDF 416.3 KB |
| MPE Test Report | Test Report | 2020-09-21 | PDF 416.3 KB |
| Test Report | Test Report | 2020-09-21 | PDF 3.1 MB |
| UNII 5GHz 802.11ax Plot Annex B | Test Report | 2020-09-21 | PDF 5.1 MB |
| UNII 5GHz 802.11ax Test Report | Test Report | 2020-09-21 | PDF 1.8 MB |
| UNII Test Report Part 1 | Test Report | 2020-09-21 | PDF 5.5 MB |
| UNII Test Report Part 2 | Test Report | 2020-09-21 | PDF 5.4 MB |
| UNII Test Report Part 3 | Test Report | 2020-09-21 | PDF 2.5 MB |
| BEJLGSBWAX12_WLAN 6 GHz Attestation Letter | Attestation Statements | 2021-02-22 | PDF 17.3 KB |
| BEJLGSBWAX12_FCC Agent Authorization Letter | Cover Letter(s) | 2021-02-22 | PDF 144.3 KB |
| BEJLGSBWAX12_FCC Confidentiality Request Letter | Cover Letter(s) | 2021-02-22 | PDF 149 KB |
| BEJLGSBWAX12_FCC Modular Approval Declaration letter | Cover Letter(s) | 2021-02-22 | PDF 61.9 KB |
| Agent Authorization Letter | Cover Letter(s) | 2020-09-21 | PDF 202 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2020-09-21 | PDF 202.2 KB |
| Modular Approval Declaration Letter | Cover Letter(s) | 2020-09-21 | PDF 382.6 KB |
| BEJLGSBWAX12_Block diagram Metadata only | Block Diagram | PDF 562.2 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 132.3 KB | |
| BEJLGSBWAX12_Circuit Diagram Metadata only | Schematics | PDF 147.8 KB | |
| Schematic Metadata only | Schematics | PDF 147.8 KB | |
| Antenna Spec Metadata only | Operational Description | PDF 444.7 KB | |
| BEJLGSBWAX12_Antenna Specification_WLAN 6 GHz Metadata only | Operational Description | PDF 458.4 KB | |
| BEJLGSBWAX12_Operating Description_rev.1 Metadata only | Operational Description | PDF 958.7 KB | |
| BEJLGSBWAX12_Operating Description_rev.2 Metadata only | Operational Description | PDF 958.5 KB | |
| Operational Description Metadata only | Operational Description | PDF 291.4 KB | |
| Operational Description - UNII Software Security Doc Metadata only | Operational Description | PDF 74.5 KB | |
| BEJLGSBWAX12_UNII Software security documentation Metadata only | SDR Software/Security Inf | PDF 74.5 KB | |
| BEJLGSBWAX12_Part List Metadata only | Parts List/Tune Up Info | PDF 74.1 KB | |
| Part List Metadata only | Parts List/Tune Up Info | PDF 74.1 KB |
Application Information
| Application ID | rcOPD9Zqp9Hn7Bflgh5kog== |
|---|---|
| Final Action Date | 2021-02-22 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0023476120 |
| Model | LGSBWAX12 |
| Frequency Range | 5955-7095 MHz |
| Equipment Class | 6XD - 15E 6 GHz Low Power Indoor Client |
| Device Description | RF Module |
| Responsible Party | Sung Soo Kim, Director, Regulatory and Environmental Affairs, sungsoo.kim@lge.com  , 201-266-2215 |
| Test Firm | Lee Yoon-Jung, HCT Co., Ltd., yjlee@hct.co.kr  , 82-31-645-6432 |
| TCB Email | kent@hctamerica.com  , charvey@ieee.org  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 08/21/2021 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Modular Approval. Output power listed is EIRP. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna(s) used for this device is installed with a minimum antenna to user separation distance of at least 20cm. Installation in portable host configurations requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure compliance including RF exposure and simultaneous transmission. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is only approved for indoor use. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| rcOPD9Zqp9Hn7Bflgh5kog== | 2021-02-22 | Original Equipment |
| XwSdE4XrvQrK2ECDeQ4+vw== | 2020-09-21 | Original Equipment |
| UsNpyteH8oOLpfeMLzWocg== | 2020-09-21 | Original Equipment |
| P11W80+uOQOH47gHXdcduA== | 2020-09-21 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application XwSdE4XrvQrK2ECDeQ4+vw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
HCT America LLC 1726 Ringwood Avenue San Jose, CA 95131 |
Date of Grant: 09/21/2020 Application Dated: 09/21/2020 |
| LG Electronics USA |
| 111 Sylvan Avenue |
| North Building |
| Englewood Cliffs, NJ 07632 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJLGSBWAX12 |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.012 |
| Power listed is the peak conducted output power. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna(s) used for this device in portable configurations is installed in mobile hosts with a minimum antenna to user separation distance of at least 20cm. Installation in portable host configurations requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure compliance including RF exposure and simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application XwSdE4XrvQrK2ECDeQ4+vw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs, NJ 07632 United States |
Date of Grant: 09/21/2020 Application Dated: 09/21/2020 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJLGSBWAX12 |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.012 |
| Power listed is the peak conducted output power. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna(s) used for this device in portable configurations is installed in mobile hosts with a minimum antenna to user separation distance of at least 20cm. Installation in portable host configurations requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure compliance including RF exposure and simultaneous transmission. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
HCT America LLC 1726 Ringwood Avenue San Jose, CA 95131 |
Date of Grant: 09/21/2020 Application Dated: 09/21/2020 |
| LG Electronics USA |
| 111 Sylvan Avenue |
| North Building |
| Englewood Cliffs, NJ 07632 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJLGSBWAX12 |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Digital Transmission System |
| Notes: | RF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.006 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.76 |
| Power listed is the peak conducted output power. This module is restricted to installation by the OEM or an OEM integrator. This approval is valid when the antenna(s) used for this device in portable configurations is installed in mobile hosts with a minimum antenna to user separation distance of at least 20cm. Installation in portable host configurations requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure compliance including RF exposure and simultaneous transmission. This device operates with 20/40 MHz channel bandwidth capabilities. Device is a 2x2 MIMO configuration as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application UsNpyteH8oOLpfeMLzWocg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs, NJ 07632 United States |
Date of Grant: 09/21/2020 Application Dated: 09/21/2020 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJLGSBWAX12 |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Digital Transmission System |
| Notes: | RF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.006 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.76 |
| Power listed is the peak conducted output power. This module is restricted to installation by the OEM or an OEM integrator. This approval is valid when the antenna(s) used for this device in portable configurations is installed in mobile hosts with a minimum antenna to user separation distance of at least 20cm. Installation in portable host configurations requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure compliance including RF exposure and simultaneous transmission. This device operates with 20/40 MHz channel bandwidth capabilities. Device is a 2x2 MIMO configuration as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
HCT America LLC 1726 Ringwood Avenue San Jose, CA 95131 |
Date of Grant: 02/22/2021 Application Dated: 01/11/2021 |
| LG Electronics USA |
| 111 Sylvan Avenue |
| North Building |
| Englewood Cliffs, NJ 07632 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJLGSBWAX12 |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | 15E 6 GHz Low Power Indoor Client |
| Notes: | RF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5955.0 - 7095.0 | 0.035 |
| Modular Approval. Output power listed is EIRP. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna(s) used for this device is installed with a minimum antenna to user separation distance of at least 20cm. Installation in portable host configurations requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure compliance including RF exposure and simultaneous transmission. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is only approved for indoor use. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application rcOPD9Zqp9Hn7Bflgh5kog==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs, NJ 07632 United States |
Date of Grant: 02/22/2021 Application Dated: 01/11/2021 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJLGSBWAX12 |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | 15E 6 GHz Low Power Indoor Client |
| Notes: | RF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5955.0 - 7095.0 | 0.035 |
| Modular Approval. Output power listed is EIRP. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna(s) used for this device is installed with a minimum antenna to user separation distance of at least 20cm. Installation in portable host configurations requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure compliance including RF exposure and simultaneous transmission. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is only approved for indoor use. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
HCT America LLC 1726 Ringwood Avenue San Jose, CA 95131 |
Date of Grant: 09/21/2020 Application Dated: 09/21/2020 |
| LG Electronics USA |
| 111 Sylvan Avenue |
| North Building |
| Englewood Cliffs, NJ 07632 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJLGSBWAX12 |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | RF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.041 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.045 | ||
| 38 CC MO ND | 15E | 5500.0 - 5720.0 | 0.042 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.04 |
| Power listed is the peak conducted output power. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna(s) used for this device is installed with a minimum antenna to user separation distance of at least 20cm. Installation in portable host configurations requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure compliance including RF exposure and simultaneous transmission. This device operates with 20MHz, 40MHz and 80MHz channel bandwidth capabilities and a 2x2 MIMO configuration as described in this filing. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application P11W80+uOQOH47gHXdcduA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs, NJ 07632 United States |
Date of Grant: 09/21/2020 Application Dated: 09/21/2020 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJLGSBWAX12 |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | RF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.041 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.045 | ||
| 38 CC MO ND | 15E | 5500.0 - 5720.0 | 0.042 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.04 |
| Power listed is the peak conducted output power. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna(s) used for this device is installed with a minimum antenna to user separation distance of at least 20cm. Installation in portable host configurations requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure compliance including RF exposure and simultaneous transmission. This device operates with 20MHz, 40MHz and 80MHz channel bandwidth capabilities and a 2x2 MIMO configuration as described in this filing. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |