FCC ID BEJLTFMV20

CDMA Transceiver with Bluetooth

by LG Electronics USA

Grantee Code: BEJ   Product Code: LTFMV20
Latest application date: 2011-10-04

FCC ID Device Details

FCC IDBEJLTFMV20
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeBEJ
Product CodeLTFMV20
Applicant BusinessLG Electronics USA 🇺🇸
Related Domains lge.com
Equipment ClassCDMA Transceiver with Bluetooth
Test FirmHCT Co., LTD

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2011-10-04
824.7-848.31 MHzOriginal Equipment2011-10-04

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2012-04-01PDF 2.7 MB
User manualUsers Manual2012-04-01PDF 3 MB
Internal PhotoInternal Photos2012-04-01PDF 592 KB
internal PhotoInternal Photos2012-04-01PDF 680 KB
External PhotoExternal Photos2012-04-01PDF 453.5 KB
External PhotoExternal Photos2012-04-01PDF 398.4 KB
Label & LocationID Label/Location Info2011-10-04PDF 107.3 KB
label & LocationID Label/Location Info2011-10-04PDF 117.1 KB
Setup PhotoTest Setup Photos2012-04-01PDF 292.9 KB
Setup PhotoTest Setup Photos2012-04-01PDF 558 KB
test reportTest Report2011-10-04PDF 786.9 KB
test reportTest Report2011-10-04PDF 987.8 KB
Authorization letterCover Letter(s)2011-10-04PDF 67.9 KB
confidential LetterCover Letter(s)2011-10-04PDF 277.8 KB
Rf ExposureRF Exposure Info2011-10-04PDF 76.2 KB

Application Information

Application IDebPHIUdq8dbCjzpSTv1+mw==
Final Action Date2011-10-04
Application PurposeOriginal Equipment
Applicant FRN0005875562
ModelLTFMV20
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionCDMA Transceiver with Bluetooth
Responsible PartyJongchul Lee, Director, Standards & Compliance, jongchul.lee@lge.com , 201-408-9181
Test FirmSang Lee, HCT Co., LTD, sjlee@HCT.co.kr , 82-31-645-6420
TCB Emailtcb@siemic.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date04/01/2012
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Professional Installation is required, installer must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
ebPHIUdq8dbCjzpSTv1+mw==2011-10-04Original Equipment
1pHDQD+znA+pMJ9g2daV0g==2011-10-04Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824.7-848.31 MHz0.460.011ppm1M28F9W22H
1851.25-1908.75 MHz1.110.009ppm1M29F9W24E
2402-2480 MHz0.002180015C

Grants

TCB Grant - Application ebPHIUdq8dbCjzpSTv1+mw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Siemic Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 10/04/2011

Application Dated: 10/04/2011
LG Electronics USA
1000 Sylvan Avenue
Englewood Cliffs, NJ 07632
 
Attention: Jongchul Lee , Director, Standards & Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BEJLTFMV20
Name of Grantee:  LG Electronics USA
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: CDMA Transceiver with Bluetooth
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.00218  

Power output listed is conducted.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Professional Installation is required, installer must be provided with transmitter operation conditions for satisfying RF exposure compliance.


EAS Grant - Application ebPHIUdq8dbCjzpSTv1+mw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LG Electronics USA
1000 Sylvan Avenue
Englewood Cliffs, NJ 07632
United States
  Date of Grant: 10/04/2011

Application Dated: 10/04/2011
 
Attention: Jongchul Lee , Director, Standards & Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BEJLTFMV20
Name of Grantee:  LG Electronics USA
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: CDMA Transceiver with Bluetooth
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.00218  

Power output listed is conducted.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Professional Installation is required, installer must be provided with transmitter operation conditions for satisfying RF exposure compliance.



TCB Grant - Application 1pHDQD+znA+pMJ9g2daV0g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Siemic Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 10/04/2011

Application Dated: 10/04/2011
LG Electronics USA
1000 Sylvan Avenue
Englewood Cliffs, NJ 07632
 
Attention: Jongchul Lee , Director, Standards & Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BEJLTFMV20
Name of Grantee:  LG Electronics USA
Equipment Class: PCS Licensed Transmitter
Notes: CDMA Transceiver with Bluetooth
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.31 0.46 0.011  PM 1M28F9W
24E 1851.25  -  1908.75 1.11 0.009  PM 1M29F9W

Output power listed is ERP for Part 22 and EIRP for Part 24.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Professional Installation is required, installer must be provided with transmitter operation conditions for satisfying RF exposure compliance.


EAS Grant - Application 1pHDQD+znA+pMJ9g2daV0g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LG Electronics USA
1000 Sylvan Avenue
Englewood Cliffs, NJ 07632
United States
  Date of Grant: 10/04/2011

Application Dated: 10/04/2011
 
Attention: Jongchul Lee , Director, Standards & Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BEJLTFMV20
Name of Grantee:  LG Electronics USA
Equipment Class: PCS Licensed Transmitter
Notes: CDMA Transceiver with Bluetooth
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.31 0.46 0.011  PM 1M28F9W
24E 1851.25  -  1908.75 1.11 0.009  PM 1M29F9W

Output power listed is ERP for Part 22 and EIRP for Part 24.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Professional Installation is required, installer must be provided with transmitter operation conditions for satisfying RF exposure compliance.



Mail To: