FCC ID BEJNT-14T90N
WLAN and BT, 2x2 PCIe M.2 1216 SD
by LG Electronics USA
Grantee Code: BEJ Product Code: NT14T90N
Latest application date: 2019-11-05
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-11-05 |
| 5180-5250 MHz | Class II permissive change or modification of presently authorized equipment | 2019-11-05 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-11-05 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9AX201D2 Grant Date: 11/20/2018 | 2019-10-02 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9AX201D2 Grant Date: 11/20/2018 | 2019-10-02 |
| 5180-5250 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9AX201D2 Grant Date: 11/20/2018 | 2019-10-02 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual Host Part 1 | Users Manual | 2020-05-03 | PDF 5.5 MB |
| User Manual Host Part 2 | Users Manual | 2020-05-03 | PDF 2.7 MB |
| User Manual | Users Manual | 2020-03-30 | PDF 1.3 MB |
| Internal Photos | Internal Photos | 2020-05-03 | PDF 627.7 KB |
| External Photos | External Photos | 2020-05-03 | PDF 617 KB |
| External Photos | External Photos | 2020-03-30 | PDF 132.8 KB |
| Label | ID Label/Location Info | 2019-11-05 | PDF 539.9 KB |
| Label | ID Label/Location Info | 2019-10-02 | PDF 50.1 KB |
| Test Setup Photos SAR | Test Setup Photos | 2020-05-03 | PDF 63.6 KB |
| C2PC | Cover Letter(s) | 2019-11-05 | PDF 48.3 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2019-11-05 | PDF 109.3 KB |
| POA | Cover Letter(s) | 2019-11-05 | PDF 46.9 KB |
| SDoC | Cover Letter(s) | 2019-11-05 | PDF 45.9 KB |
| Change in ID Cover Letter | Cover Letter(s) | 2019-10-02 | PDF 25.6 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2019-10-02 | PDF 26 KB |
| POA | Cover Letter(s) | 2019-10-02 | PDF 27.1 KB |
| Permisson Letter from original | Cover Letter(s) | 2019-10-02 | PDF 81.3 KB |
| confidentiality request letter | Cover Letter(s) | 2019-10-02 | PDF 26 KB |
| SAR Report | RF Exposure Info | 2019-11-05 | PDF 1.2 MB |
| SAR Report Appendix A | RF Exposure Info | 2019-11-05 | PDF 1.3 MB |
| SAR Report Appendix B | RF Exposure Info | 2019-11-05 | PDF 591 KB |
| SAR Report Appendix C | RF Exposure Info | 2019-11-05 | PDF 1.8 MB |
Application Information
| Application ID | lpAzKg+ExlisSSyAuIAYgw== |
|---|---|
| Final Action Date | 2019-11-05 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0023476120 |
| Model | NT-14T90N |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WLAN and BT, 2x2 PCIe M.2 1216 SD |
| Responsible Party | Sung Soo Kim, Director, Regulatory and Environmental Affairs, sungsoo.kim@lge.com  , 201-266-2215 |
| Test Firm | Alex Chen, Sporton International Inc., alex@sporton.com.tw  , 88633273456 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 05/03/2020 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This transmitter has 20 and 40 MHz bandwidth modes. Class II Permissive Change: Limited Modular Approval. Adds portable operation when integrated with LG Electronics’ Laptop Models 14T90N, 14TB90N and 14TG90N. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 1.19 W/kg and 1.45 W/kg, respectively. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| lpAzKg+ExlisSSyAuIAYgw== | 2019-11-05 | Class II permissive change or modification of presently authorized equipment |
| d0MGjebjr2rlt4XhG1Z85w== | 2019-11-05 | Class II permissive change or modification of presently authorized equipment |
| YO7e0ZyZL31Q8OO+9NK02w== | 2019-11-05 | Class II permissive change or modification of presently authorized equipment |
| xZLAbprrBgZu4uAB+OJPEQ== | 2019-10-02 | Change in identification of presently authorized equipment. Original FCC ID: PD9AX201D2 Grant Date: 11/20/2018 |
| jYPMqpA5dn/tPAkM0LUIqg== | 2019-10-02 | Change in identification of presently authorized equipment. Original FCC ID: PD9AX201D2 Grant Date: 11/20/2018 |
| fu22y136MdkcqErcNmfl/g== | 2019-10-02 | Change in identification of presently authorized equipment. Original FCC ID: PD9AX201D2 Grant Date: 11/20/2018 |
| CaEjbNR05gZB3QaLbO0SaA== | 2019-10-02 | Change in identification of presently authorized equipment. Original FCC ID: PD9AX201D2 Grant Date: 11/20/2018 |
Equipment Authorization
Grants
TCB Grant - Application YO7e0ZyZL31Q8OO+9NK02w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 11/05/2019 Application Dated: 11/04/2019 |
| LG Electronics USA |
| 111 Sylvan Avenue |
| North Building |
| Englewood Cliffs, NJ 07632 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJNT-14T90N |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN and BT, 2x2 PCIe M.2 1216 SD adapter card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Modular Approval. Adds portable operation when integrated with LG Electronics’ Laptop Models 14T90N, 14TB90N and 14TG90N. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.48 W/kg and 1.45 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application YO7e0ZyZL31Q8OO+9NK02w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs, NJ 07632 United States |
Date of Grant: 11/05/2019 Application Dated: 11/04/2019 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJNT-14T90N |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN and BT, 2x2 PCIe M.2 1216 SD adapter card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Modular Approval. Adds portable operation when integrated with LG Electronics’ Laptop Models 14T90N, 14TB90N and 14TG90N. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 0.48 W/kg and 1.45 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 10/02/2019 Application Dated: 10/01/2019 |
| LG Electronics USA |
| 111 Sylvan Avenue |
| North Building |
| Englewood Cliffs, NJ 07632 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJNT-14T90N |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN and BT, 2x2 PCIe M.2 1216 SD adapter card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application xZLAbprrBgZu4uAB+OJPEQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs, NJ 07632 United States |
Date of Grant: 10/02/2019 Application Dated: 10/01/2019 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJNT-14T90N |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WLAN and BT, 2x2 PCIe M.2 1216 SD adapter card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 11/05/2019 Application Dated: 11/04/2019 |
| LG Electronics USA |
| 111 Sylvan Avenue |
| North Building |
| Englewood Cliffs, NJ 07632 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJNT-14T90N |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN and BT, 2x2 PCIe M.2 1216 SD |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.955 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This transmitter has 20 and 40 MHz bandwidth modes. Class II Permissive Change: Limited Modular Approval. Adds portable operation when integrated with LG Electronics’ Laptop Models 14T90N, 14TB90N and 14TG90N. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 1.19 W/kg and 1.45 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application lpAzKg+ExlisSSyAuIAYgw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs, NJ 07632 United States |
Date of Grant: 11/05/2019 Application Dated: 11/04/2019 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJNT-14T90N |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN and BT, 2x2 PCIe M.2 1216 SD |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.955 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This transmitter has 20 and 40 MHz bandwidth modes. Class II Permissive Change: Limited Modular Approval. Adds portable operation when integrated with LG Electronics’ Laptop Models 14T90N, 14TB90N and 14TG90N. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 1.19 W/kg and 1.45 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 10/02/2019 Application Dated: 10/01/2019 |
| LG Electronics USA |
| 111 Sylvan Avenue |
| North Building |
| Englewood Cliffs, NJ 07632 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJNT-14T90N |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN and BT, 2x2 PCIe M.2 1216 SD adapter card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.955 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This transmitter has 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application jYPMqpA5dn/tPAkM0LUIqg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs, NJ 07632 United States |
Date of Grant: 10/02/2019 Application Dated: 10/01/2019 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJNT-14T90N |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN and BT, 2x2 PCIe M.2 1216 SD adapter card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.955 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This transmitter has 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 10/02/2019 Application Dated: 10/01/2019 |
| LG Electronics USA |
| 111 Sylvan Avenue |
| North Building |
| Englewood Cliffs, NJ 07632 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJNT-14T90N |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | WLAN and BT, 2x2 PCIe M.2 1216 SD adapter card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application fu22y136MdkcqErcNmfl/g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs, NJ 07632 United States |
Date of Grant: 10/02/2019 Application Dated: 10/01/2019 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJNT-14T90N |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | WLAN and BT, 2x2 PCIe M.2 1216 SD adapter card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 11/05/2019 Application Dated: 11/04/2019 |
| LG Electronics USA |
| 111 Sylvan Avenue |
| North Building |
| Englewood Cliffs, NJ 07632 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJNT-14T90N |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN and BT, 2x2 PCIe M.2 1216 SD adapter card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.145 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.145 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.15 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.139 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20 MHz, 40 MHz, 80 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Modular Approval. Adds portable operation when integrated with LG Electronics’ Laptop Models 14T90N, 14TB90N and 14TG90N. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 1.16 W/kg and 1.33 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application d0MGjebjr2rlt4XhG1Z85w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs, NJ 07632 United States |
Date of Grant: 11/05/2019 Application Dated: 11/04/2019 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJNT-14T90N |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN and BT, 2x2 PCIe M.2 1216 SD adapter card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.145 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.145 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.15 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.139 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20 MHz, 40 MHz, 80 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Class II Permissive Change: Limited Modular Approval. Adds portable operation when integrated with LG Electronics’ Laptop Models 14T90N, 14TB90N and 14TG90N. The highest reported SAR for use at the body and simultaneous transmission exposure conditions are 1.16 W/kg and 1.33 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 10/02/2019 Application Dated: 10/01/2019 |
| LG Electronics USA |
| 111 Sylvan Avenue |
| North Building |
| Englewood Cliffs, NJ 07632 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJNT-14T90N |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN and BT, 2x2 PCIe M.2 1216 SD adapter card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.145 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.145 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.15 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.139 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application CaEjbNR05gZB3QaLbO0SaA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs, NJ 07632 United States |
Date of Grant: 10/02/2019 Application Dated: 10/01/2019 |
| Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BEJNT-14T90N |
| Name of Grantee: | LG Electronics USA |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN and BT, 2x2 PCIe M.2 1216 SD adapter card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.145 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.145 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.15 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.139 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.55W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 12mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |