1. FCC ID
  2. BEJ
  3. BEJTM12ANNAGM2

FCC ID BEJTM12ANNAGM2

Module

by LG Electronics USA

Grantee Code: BEJ   Product Code: TM12ANNAGM2
Latest application date: 2020-08-31

FCC ID Device Details

FCC IDBEJTM12ANNAGM2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeBEJ
Product CodeTM12ANNAGM2
Applicant BusinessLG Electronics USA 🇺🇸
Related Domains lge.com
Equipment ClassModule
Test FirmDT&C; Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
699.7-715.3 MHzClass II permissive change or modification of presently authorized equipment2020-08-31
700.5-714.5 MHzOriginal Equipment2017-12-07

Exhibits

DocumentTypeAvailableFile
Internal PhotosInternal Photos2021-02-27PDF 805.1 KB
Internal PhotosInternal Photos2018-06-05PDF 397.7 KB
External PhotosExternal Photos2021-02-27PDF 1.9 MB
External PhotosExternal Photos2018-06-05PDF 747.5 KB
Label LocationID Label/Location Info2017-12-07PDF 267.2 KB
TsupTest Setup Photos2021-02-27PDF 473.4 KB
Test Setup Photos PCBTest Setup Photos2018-06-05PDF 451.9 KB
Test Rpt GSM, WCDMATest Report2020-08-31PDF 781.4 KB
TestRpt LTETest Report2020-08-31PDF 935.3 KB
Test Report PCB LTE B2-4-12 PART 1Test Report2017-12-07PDF 5.4 MB
Test Report PCB LTE B2-4-12 PART 2Test Report2017-12-07PDF 5.6 MB
Test Report PCB WCDMATest Report2017-12-07PDF 3.2 MB
C2PC Cover LetterCover Letter(s)2020-08-31PDF 447.9 KB
Confidentiality LetterCover Letter(s)2020-08-31PDF 20.2 KB
NDACover Letter(s)2020-08-31PDF 74.6 KB
POA LetterCover Letter(s)2020-08-31PDF 125.4 KB
Authorization LetterCover Letter(s)2017-12-07PDF 84.1 KB
Confidentiality RequestCover Letter(s)2017-12-07PDF 135.6 KB
Modular Approval LetterCover Letter(s)2017-12-07PDF 154.3 KB
Non Disclosure AgreementCover Letter(s)2017-12-07PDF 74.6 KB
MPE ReportRF Exposure Info2020-08-31PDF 110.6 KB
MPE CalculationRF Exposure Info2017-12-07PDF 72.3 KB
User Manual Metadata onlyUsers ManualPDF 1.5 MB
User Manual Metadata onlyUsers ManualPDF 734 KB
Block Diagram Metadata onlyBlock DiagramPDF 544.3 KB
Schematics Metadata onlySchematicsPDF 488.2 KB
Schematics Part Location Metadata onlySchematicsPDF 2.4 MB
Antenna Specification OpDes Metadata onlyOperational DescriptionPDF 1.8 MB
Operational Description Metadata onlyOperational DescriptionPDF 1.4 MB
Operational Description Metadata onlyOperational DescriptionPDF 1.4 MB
Parts List Metadata onlyParts List/Tune Up InfoPDF 256.4 KB
Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 1.1 MB

Application Information

Application IDybebnK0lpZzEDaOlP6rsCg==
Final Action Date2020-08-31
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0023476120
ModelTM12ANNAGM2
Frequency Range699.7-715.3 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionModule
Responsible PartySung Soo Kim, Director, Regulatory and Environmental Affairs, sungsoo.kim@lge.com , 201-266-2215
Test FirmLee Su-jeong, DT&C; Co., Ltd., gungmin0524@dtnc.net , 82-31-321-2664
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityYes
Short-Term Confidentiality Date02/27/2021
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Single Modular Approval. Professional installation is required. Output Power is conducted. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for Bands 2 and 4; and LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for Band 12. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations. Limited Single Modular Approval: Approved for mobile use GM Telematics assembly, Model TCAA19NANN, FCC ID BEJTCAA19ANANN. Class II Permissive Change: Changing power from ERP/EIRP to conducted power.

Applications

Application IDDatePurpose
ybebnK0lpZzEDaOlP6rsCg==2020-08-31Class II permissive change or modification of presently authorized equipment
IdFDnKHf+ByOfFjtEgcECA==2017-12-07Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
699.7-715.3 MHz0.1770.004ppm1M09W7D27
699.7-715.3 MHz0.2110.004ppm1M08G7D27
700.5-714.5 MHz0.1560.004ppm2M70W7D27
700.5-714.5 MHz0.2120.004ppm2M70G7D27
700.5-714.5 MHz0.1740.004ppm2M70W7D27
701.5-713.5 MHz0.2120.004ppm4M48G7D27
701.5-713.5 MHz0.1770.004ppm4M49W7D27
704-711 MHz0.1890.004ppm8M96G7D27
704-711 MHz0.1470.004ppm8M96W7D27
704-711 MHz0.1820.004ppm8M96W7D27
1710.7-1754.3 MHz0.2010.001ppm1M09G7D27
1710.7-1754.3 MHz0.1720.001ppm1M09W7D27
1711.5-1753.5 MHz0.2120.001ppm2M69G7D27
1711.5-1753.5 MHz0.1730.001ppm2M70W7D27
1711.5-1753.5 MHz0.2280.001ppm2M69G7D27
1712.5-1752.5 MHz0.2150.001ppm4M49G7D27
1712.5-1752.5 MHz0.1730.001ppm4M50W7D27
1715-1750 MHz0.2250.001ppm8M98G7D27
1715-1750 MHz0.1790.001ppm8M97W7D27
1717.5-1745.5 MHz0.2070.001ppm13M4G7D27
1717.5-1745.5 MHz0.1730.001ppm13M4W7D27
1717.5-1747.5 MHz0.1880.001ppm13M4W7D27
1720-1745 MHz0.2010.001ppm17M9G7D27
1720-1745 MHz0.1710.001ppm17M9W7D27
1720-1745 MHz0.2170.001ppm17M9G7D27
1720-1745 MHz0.1760.001ppm17M9W7D27
1850.7-1909.3 MHz0.2020.001ppm1M08G7D24E
1850.7-1909.3 MHz0.1730.001ppm1M09W7D24E
1851.5-1908.5 MHz0.2010.001ppm2M70G7D24E
1851.5-1908.5 MHz0.1720.001ppm2M70W7D24E
1852.4-1907.6 MHz0.2230.003ppm4M17F9W24E
1852.5-1907.5 MHz0.2070.001ppm4M49G7D24E
1852.5-1907.5 MHz0.1770.001ppm4M48W7D24E
1855-1905 MHz0.1530.001ppm8M95G7D24E
1855-1905 MHz0.1230.001ppm8M96W7D24E
1855-1905 MHz0.2080.001ppm8M95G7D24E
1855-1905 MHz0.1760.001ppm8M96W7D24E
1857.5-1902.5 MHz0.2030.001ppm13M4G7D24E
1857.5-1902.5 MHz0.1690.001ppm13M4W7D24E
1860-1900 MHz0.1360.001ppm17M9G7D24E
1860-1900 MHz0.1120.001ppm17M9W7D24E
1860-1900 MHz0.20.001ppm17M9G7D24E
1860-1900 MHz0.1720.001ppm17M9W7D24E

Grants

TCB Grant - Application ybebnK0lpZzEDaOlP6rsCg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
 Date of Grant: 08/31/2020

Application Dated: 08/31/2020
LG Electronics USA
111 Sylvan Avenue
North Building
Englewood Cliffs, NJ 07632
 
Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BEJTM12ANNAGM2
Name of Grantee:  LG Electronics USA
Equipment Class: PCS Licensed Transmitter
Notes: Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
27 1712.4  -  1752.6 0.208 0.003  PM 4M16F9W
27 1852.4  -  1907.6 0.211 0.003  PM 4M17F9W
27 704.0  -  711.0 0.218 0.004  PM 8M96G7D
27 704.0  -  711.0 0.182 0.004  PM 8M96W7D
27 701.5  -  713.5 0.212 0.004  PM 4M48G7D
27 701.5  -  713.5 0.177 0.004  PM 4M49W7D
27 700.5  -  714.5 0.212 0.004  PM 2M70G7D
27 700.5  -  714.5 0.174 0.004  PM 2M70W7D
27 699.7  -  715.3 0.211 0.004  PM 1M08G7D
27 699.7  -  715.3 0.177 0.004  PM 1M09W7D
27 1720.0  -  1745.0 0.201 0.001  PM 17M9G7D
27 1720.0  -  1745.0 0.171 0.001  PM 17M9W7D
27 1717.5  -  1745.5 0.207 0.001  PM 13M4G7D
27 1717.5  -  1745.5 0.173 0.001  PM 13M4W7D
27 1715.0  -  1750.0 0.225 0.001  PM 8M98G7D
27 1715.0  -  1750.0 0.179 0.001  PM 8M97W7D
27 1712.5  -  1752.5 0.215 0.001  PM 4M49G7D
27 1712.5  -  1752.5 0.173 0.001  PM 4M50W7D
27 1711.5  -  1753.5 0.212 0.001  PM 2M69G7D
27 1711.5  -  1753.5 0.173 0.001  PM 2M70W7D
27 1710.7  -  1754.3 0.201 0.001  PM 1M09G7D
27 1710.7  -  1754.3 0.172 0.001  PM 1M09W7D
24E 1860.0  -  1900.0 0.2 0.001  PM 17M9G7D
24E 1860.0  -  1900.0 0.172 0.001  PM 17M9W7D
24E 1857.5  -  1902.5 0.203 0.001  PM 13M4G7D
24E 1857.5  -  1902.5 0.169 0.001  PM 13M4W7D
24E 1855.0  -  1905.0 0.208 0.001  PM 8M95G7D
24E 1855.0  -  1905.0 0.176 0.001  PM 8M96W7D
24E 1852.5  -  1907.5 0.207 0.001  PM 4M49G7D
24E 1852.5  -  1907.5 0.177 0.001  PM 4M48W7D
24E 1851.5  -  1908.5 0.201 0.001  PM 2M70G7D
24E 1851.5  -  1908.5 0.172 0.001  PM 2M70W7D
24E 1850.7  -  1909.3 0.202 0.001  PM 1M08G7D
24E 1850.7  -  1909.3 0.173 0.001  PM 1M09W7D

Limited Single Modular Approval. Professional installation is required. Output Power is conducted. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for Bands 2 and 4; and LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for Band 12. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations.

Limited Single Modular Approval: Approved for mobile use GM Telematics assembly, Model TCAA19NANN, FCC ID BEJTCAA19ANANN.

Class II Permissive Change: Changing power from ERP/EIRP to conducted power.


EAS Grant - Application ybebnK0lpZzEDaOlP6rsCg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

LG Electronics USA
111 Sylvan Avenue North Building
Englewood Cliffs, NJ 07632
United States 		  Date of Grant: 08/31/2020

Application Dated: 08/31/2020
 
Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BEJTM12ANNAGM2
Name of Grantee:  LG Electronics USA
Equipment Class: PCS Licensed Transmitter
Notes: Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
27 1712.4  -  1752.6 0.208 0.003  PM 4M16F9W
27 1852.4  -  1907.6 0.211 0.003  PM 4M17F9W
27 704.0  -  711.0 0.218 0.004  PM 8M96G7D
27 704.0  -  711.0 0.182 0.004  PM 8M96W7D
27 701.5  -  713.5 0.212 0.004  PM 4M48G7D
27 701.5  -  713.5 0.177 0.004  PM 4M49W7D
27 700.5  -  714.5 0.212 0.004  PM 2M70G7D
27 700.5  -  714.5 0.174 0.004  PM 2M70W7D
27 699.7  -  715.3 0.211 0.004  PM 1M08G7D
27 699.7  -  715.3 0.177 0.004  PM 1M09W7D
27 1720.0  -  1745.0 0.201 0.001  PM 17M9G7D
27 1720.0  -  1745.0 0.171 0.001  PM 17M9W7D
27 1717.5  -  1745.5 0.207 0.001  PM 13M4G7D
27 1717.5  -  1745.5 0.173 0.001  PM 13M4W7D
27 1715.0  -  1750.0 0.225 0.001  PM 8M98G7D
27 1715.0  -  1750.0 0.179 0.001  PM 8M97W7D
27 1712.5  -  1752.5 0.215 0.001  PM 4M49G7D
27 1712.5  -  1752.5 0.173 0.001  PM 4M50W7D
27 1711.5  -  1753.5 0.212 0.001  PM 2M69G7D
27 1711.5  -  1753.5 0.173 0.001  PM 2M70W7D
27 1710.7  -  1754.3 0.201 0.001  PM 1M09G7D
27 1710.7  -  1754.3 0.172 0.001  PM 1M09W7D
24E 1860.0  -  1900.0 0.2 0.001  PM 17M9G7D
24E 1860.0  -  1900.0 0.172 0.001  PM 17M9W7D
24E 1857.5  -  1902.5 0.203 0.001  PM 13M4G7D
24E 1857.5  -  1902.5 0.169 0.001  PM 13M4W7D
24E 1855.0  -  1905.0 0.208 0.001  PM 8M95G7D
24E 1855.0  -  1905.0 0.176 0.001  PM 8M96W7D
24E 1852.5  -  1907.5 0.207 0.001  PM 4M49G7D
24E 1852.5  -  1907.5 0.177 0.001  PM 4M48W7D
24E 1851.5  -  1908.5 0.201 0.001  PM 2M70G7D
24E 1851.5  -  1908.5 0.172 0.001  PM 2M70W7D
24E 1850.7  -  1909.3 0.202 0.001  PM 1M08G7D
24E 1850.7  -  1909.3 0.173 0.001  PM 1M09W7D

Limited Single Modular Approval. Professional installation is required. Output Power is conducted. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for Bands 2 and 4; and LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for Band 12. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations.

Limited Single Modular Approval: Approved for mobile use GM Telematics assembly, Model TCAA19NANN, FCC ID BEJTCAA19ANANN.

Class II Permissive Change: Changing power from ERP/EIRP to conducted power.



TCB Grant - Application IdFDnKHf+ByOfFjtEgcECA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
 Date of Grant: 12/07/2017

Application Dated: 12/07/2017
LG Electronics USA
111 Sylvan Avenue
North Building
Englewood Cliffs, NJ 07632
 
Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BEJTM12ANNAGM2
Name of Grantee:  LG Electronics USA
Equipment Class: PCS Licensed Transmitter
Notes: Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
27 1712.4  -  1752.6 0.229 0.003  PM 4M16F9W
24E 1852.4  -  1907.6 0.223 0.003  PM 4M17F9W
27 704.0  -  711.0 0.189 0.004  PM 8M96G7D
27 704.0  -  711.0 0.147 0.004  PM 8M96W7D
27 700.5  -  714.5 0.156 0.004  PM 2M70W7D
27 1720.0  -  1745.0 0.217 0.001  PM 17M9G7D
27 1720.0  -  1745.0 0.176 0.001  PM 17M9W7D
27 1717.5  -  1747.5 0.188 0.001  PM 13M4W7D
27 1711.5  -  1753.5 0.228 0.001  PM 2M69G7D
24E 1860.0  -  1900.0 0.136 0.001  PM 17M9G7D
24E 1860.0  -  1900.0 0.112 0.001  PM 17M9W7D
24E 1855.0  -  1905.0 0.153 0.001  PM 8M95G7D
24E 1855.0  -  1905.0 0.123 0.001  PM 8M96W7D

Limited Single Modular Approval. Professional installation is required. Output Power is EIRP and ERP for above and below 1 GHz, respectively. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for Bands 2 and 4; and LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for Band 12. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations.

EAS Grant - Application IdFDnKHf+ByOfFjtEgcECA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

LG Electronics USA
111 Sylvan Avenue North Building
Englewood Cliffs, NJ 07632
United States 		  Date of Grant: 12/07/2017

Application Dated: 12/07/2017
 
Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BEJTM12ANNAGM2
Name of Grantee:  LG Electronics USA
Equipment Class: PCS Licensed Transmitter
Notes: Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
27 1712.4  -  1752.6 0.229 0.003  PM 4M16F9W
24E 1852.4  -  1907.6 0.223 0.003  PM 4M17F9W
27 704.0  -  711.0 0.189 0.004  PM 8M96G7D
27 704.0  -  711.0 0.147 0.004  PM 8M96W7D
27 700.5  -  714.5 0.156 0.004  PM 2M70W7D
27 1720.0  -  1745.0 0.217 0.001  PM 17M9G7D
27 1720.0  -  1745.0 0.176 0.001  PM 17M9W7D
27 1717.5  -  1747.5 0.188 0.001  PM 13M4W7D
27 1711.5  -  1753.5 0.228 0.001  PM 2M69G7D
24E 1860.0  -  1900.0 0.136 0.001  PM 17M9G7D
24E 1860.0  -  1900.0 0.112 0.001  PM 17M9W7D
24E 1855.0  -  1905.0 0.153 0.001  PM 8M95G7D
24E 1855.0  -  1905.0 0.123 0.001  PM 8M96W7D

Limited Single Modular Approval. Professional installation is required. Output Power is EIRP and ERP for above and below 1 GHz, respectively. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for Bands 2 and 4; and LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for Band 12. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations.



Mail To: