FCC ID BEJTM510

This application does not exist.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs, NJ 07632 United States

Date of Grant: 12/11/2000 Application Dated: 10/09/2000

Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	BEJTM510
Name of Grantee:	LG Electronics USA
Equipment Class:	PCS Licensed Transmitter held to ear
Notes:	Tri-Mode Dual-Band Analog/PCS Phone
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	22	824.04  -  848.97	0.6	2.5  PM	40K0F8W
	22	824.04  -  848.97	0.6	2.5  PM	40K0F1D
BC	22	824.7  -  848.31	0.407	2.5  PM	1M25F9W
	24	1851.25  -  1908.75	0.378	2.5  PM	1M25F9W

Output is ERP for Part 22 and EIRP for Part 24. For AMPS mode operations, units produced must not exceed 501 mW conducted output, as tested for this filing, for satisfying RF exposure compliance. SAR compliance for body-worn operating configurations is limited to the specific configuration tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 2.0 cm separation between the device, including its antenna whether extended or retracted, and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values are: Part 22 AMPS/CDMA modes - Head: 1.42 W/kg; Body-worn: 1.33 W/kg Part 24 PCS mode - Head: 1.0 W/kg; Body-worn: 0.68 W/kg

BC:	The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application kTaCugHwdGYUDTxBVXMEbg==

EAS Grant - Application kTaCugHwdGYUDTxBVXMEbg==

Mail To:

Randy Ortanez, President

PCTEST Engineering Laboratory, Inc.

6660-B Dobbin Road

Columbia, MD 21045

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs, NJ 07632 United States

Date of Grant: 10/16/2001 Application Dated: 08/20/2001

Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	BEJTM510
Name of Grantee:	LG Electronics USA
Equipment Class:	PCS Licensed Transmitter held to ear
Notes:	Tri-Mode Dual-Band Analog/PCS Phone (AMPS/CDMA)
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BC	22H	824.04  -  848.97	0.6	2.5  PM	40K0F8W
BC	22H	824.04  -  848.97	0.6	2.5  PM	40K0F1D
	22.901(d)	824.7  -  848.31	0.407	2.5  PM	1M25F9W
	24E	1851.25  -  1908.75	0.378	2.5  PM	1M25F9W

This Permissive Change/Modification was originally issued on 09/10/2001.

Permissive Change to authorize Dual-Pitch Antenna and new Beltclip.

Output is ERP for Part 22 and EIRP for Part 24. For AMPS mode operations, units produced must not exceed 501 mW conducted output, as tested for this filing, for satisfying RF exposure compliance. SAR compliance for body-worn operating configurations is limited to the specific configuration tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 2.5 cm separation between the device, including its antenna whether extended or retracted, and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values are: Part 22 AMPS/CDMA modes - Head: 1.42 W/kg; Body-worn: 1.33 W/kg Part 24 PCS mode - Head: 1.28 W/kg; Body-worn: 0.68 W/kg

BC:	The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To:

Randy Ortanez, President

PCTEST Engineering Laboratory, Inc.

6660-B Dobbin Road

Columbia, MD 21045