FCC ID BEJ-WL1SB23

BEJWL1SB23, BEJ WL1SB23, BEJ-WL1SB23, BEJ-WLISB23, BEJ-WL15B23

LG Electronics USA, Inc. Wireless Audio Module WL1SB23

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: BEJ-WL1SB23 is BEJ. The remaining characters of the FCC ID, -WL1SB23, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: Wireless Audio Module

Application: Wireless Audio Module
Equipment Class: NII - Unlicensed National Information Infrastructure TX
Short Link: fcc.id/BEJ-WL1SB23
Sources: FCC.gov | FCC.report
Registered By: LG Electronics USA, Inc. - BEJ (United States)

App #	Purpose	Date	Unique ID
1	Original Equipment	2023-08-27	CvVSUevKeRTMhs7Y8gEGRg==

Operating Frequencies

Device operates within approved frequencies overlapping with the following cellular bands: LTE 255,Unlicensed NII-3 DOWN | LTE 46,TD Unlicensed DOWN |

Frequency Range	Power Output	Rule Parts	Line Entry
5.16-5.245 GHz	11.5 mW	15E	1
5.73-5.845 GHz	28.3 mW	15E	2

Exhibits

Document	Type	Submitted Available
Test Report-Part 2-FCC-Rev01-230822	Test Report Adobe Acrobat PDF (3912 kB)	2023-08-27 2023-08-27
Test Report-Part 1-FCC-Rev01-230822	Test Report Adobe Acrobat PDF (1377 kB)	2023-08-27 2023-08-27
Antenna Datasheet	Test Report Adobe Acrobat PDF (1578 kB)	2023-08-27 2023-08-27
ACB-FCC-Maximum Permissive Exposure-Rev01-230822	RF Exposure Info Adobe Acrobat PDF (260 kB)	2023-08-27 2023-08-27
Label Format and Location	ID Label/Location Info Adobe Acrobat PDF (45 kB)	2023-08-27 2023-08-27
Request for Confidentiality	Cover Letter(s) Adobe Acrobat PDF (201 kB)	2023-08-27 2023-08-27
ACB-Form-FCC-Modular-Letter	Cover Letter(s) Adobe Acrobat PDF (427 kB)	2023-08-27 2023-08-27
ACB-Form-FCC-Application-Letters-Covered-List-Attestation	Attestation Statements Adobe Acrobat PDF (386 kB)	2023-08-27 2023-08-27
ACB-FCC-U.S. Agent Designation for Service of Process	Attestation Statements Adobe Acrobat PDF (247 kB)	2023-08-27 2023-08-27
ACB-FCC-Authority to Act as Agent Letter	Cover Letter(s) Adobe Acrobat PDF (248 kB)	2023-08-27 2023-08-27
TempConfidential_EUT Internal Photo	Internal Photos Adobe Acrobat PDF (385 kB)	2023-08-27 2024-02-24
Confidential_Block Diagram	Block Diagram Adobe Acrobat PDF (210 kB)	2023-08-27
TempConfidential_User Manual-Rev02-230822	Users Manual Adobe Acrobat PDF (687 kB)	2023-08-27 2024-02-24
Confidential_Operating Description-Software Configuration Control Declaration	Operational Description Adobe Acrobat PDF (258 kB)	2023-08-27
TempConfidential_EUT External Photo	External Photos Adobe Acrobat PDF (400 kB)	2023-08-27 2024-02-24
TempConfidential_Test Setup Photo-FCC	Test Setup Photos Adobe Acrobat PDF (1940 kB)	2023-08-27 2024-02-24
Confidential_Operating Description-Rev01-230822	Operational Description Adobe Acrobat PDF (687 kB)	2023-08-27
Confidential_Schematic	Schematics Adobe Acrobat PDF (49 kB)	2023-08-27

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version

Applicant Information

Applicant's complete, legal business name:	LG Electronics USA, Inc.
FCC Registration Number (FRN):	0023476120
Alphanumeric FCC ID:	BEJWL1SB23
Unique Application Identifier:	CvVSUevKeRTMhs7Y8gEGRg==
Line one:	111 Sylvan Avenue
Line two:	North Building
City:	Englewood Cliffs
State:	New Jersey
Country:	United States
Zip Code:	07632

TCB Information

TCB Application Email Address:	hotline@acbcert.com
TCB Scope:	A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID

Grantee Code:	BEJ
Product Code:	-WL1SB23

Person at the applicant's address to receive grant or for contact

Name:	Heejae Cho
Title:	Director, Regulatory and Environmental Affairs

Telephone Number:

201-470-2696

Extension:

Fax Number:	201-816-2003
Email:	heejae.cho@lge.com

Technical Contact

Firm Name:	AUDIX
First Name:	Ben
Last Name:	Cheng
Country:	Taiwan

E-Mail:

ben_cheng@audixtech.com

Long-Term Confidentiality

Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: Yes

Short-Term Confidentiality

Does short-term confidentiality apply to this application?: Yes

If so, specify the short-term confidentiality release date (MM/DD/YYYY format): 02/24/2024
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio

Is this application for software defined/cognitive radio authorization? No

Equipment Class

Equipment Class: NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant):	Wireless Audio Module

Related OET KnowledgeDataBase Inquiry

Is there a KDB inquiry associated with this application? No

Modular Equipment

Modular Type: Single Modular Approval

Application Purpose

Application is for: Original Equipment

Composite/Related Equipment

Is the equipment in this application a composite device subject to an additional equipment authorization? No

Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? No

Test Firm Information

Name of test firm and contact person on file with the FCC:

Firm Name: Audix Technology Corporation

First Name: Allen

Last Name: Wang

Telephone Number:

886226092133

Extension:

Fax Number: 886226099303

E-mail: allen_wang@audixtech.com

Grant Comments

Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Single Modular Approval. Power Output listed is conducted. The antennas used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antennas tested with the device (PCB Antennas: ANT1, WA0A-PCB and ANT2, WA0A-PCB, manufactured by Shenzhen ZTX Communication Technology Co., Ltd.) or similar antenna(s) with equal or lesser gain may be used with this transmitter.

Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver

Is there an equipment authorization waiver associated with this application? No

If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?: No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:

The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify? Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing: Ben Cheng

Title of authorized signature:

Grants

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046

Date of Grant: 08/27/2023

Application Dated: 08/27/2023

LG Electronics USA, Inc.

111 Sylvan Avenue

North Building

Englewood Cliffs, NJ 07632

Attention: Heejae Cho , Director, Regulatory and Environmental Affairs

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	BEJ-WL1SB23

Name of Grantee:	LG Electronics USA, Inc.

Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wireless Audio Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15E	5160.0 - 5245.0	0.0115
	15E	5730.0 - 5845.0	0.0283

Single Modular Approval. Power Output listed is conducted. The antennas used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.

This module is approved in mobile configuration. Only those antennas tested with the device (PCB Antennas: ANT1, WA0A-PCB and ANT2, WA0A-PCB, manufactured by Shenzhen ZTX Communication Technology Co., Ltd.) or similar antenna(s) with equal or lesser gain may be used with this transmitter.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

LG Electronics USA, Inc.
111 Sylvan Avenue North Building
Englewood Cliffs, NJ 07632
United States