FCC ID BJI-GN1060
Wireless LAN Module
by Toshiba TEC Corporation
Grantee Code: BJI Product Code: GN1060
Latest application date: 2010-09-27
FCC ID Device Details
| FCC ID | BJI-GN1060 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | BJI |
| Product Code | GN1060 |
| Applicant Business | Toshiba TEC Corporation 🇯🇵 |
| Related Domains |  toshibatec.co.jp |
| Equipment Class | Wireless LAN Module |
| Test Firm | SGS RF Technologies Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2010-09-27 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: PPD-AR5B95 Grant Date: 12/12/2008 | 2010-08-23 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Host Users Manual | Users Manual | 2010-09-27 | PDF 333.7 KB |
| Users Manual | Users Manual | 2010-09-27 | PDF 1.3 MB |
| External Photos | External Photos | 2010-08-24 | PDF 107.5 KB |
| FCC ID Label Format | ID Label/Location Info | 2010-08-24 | PDF 77 KB |
| Test Setup Photos | Test Setup Photos | 2010-09-27 | PDF 405.6 KB |
| Test Report | Test Report | 2010-09-27 | PDF 538.9 KB |
| Authorization Letter | Cover Letter(s) | 2010-09-27 | PDF 137.2 KB |
| Class II Change Application Letter | Cover Letter(s) | 2010-09-27 | PDF 177.8 KB |
| Permanent Confidentiality Request Letter | Cover Letter(s) | 2010-09-27 | PDF 31.3 KB |
| Agent Authorization Letter | Cover Letter(s) | 2010-08-24 | PDF 137.2 KB |
| Applicant Request Letter | Cover Letter(s) | 2010-08-24 | PDF 220.6 KB |
| Authorization Letter | Cover Letter(s) | 2010-08-24 | PDF 34.9 KB |
Application Information
| Application ID | 4R9jkGLC8A9TyNEXMr5imA== |
|---|---|
| Final Action Date | 2010-09-27 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0022399117 |
| Model | -GN1060 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wireless LAN Module |
| Responsible Party | Tatsuyuki Miura, Tatsuyuki_Miura@toshibatec.co.jp , 81-55-976-7474 |
| Test Firm | Toshiro Ikegami, SGS RF Technologies Inc., toshihiro.ikegami@sgs.com  , 81455340645 |
| TCB Email | certnotice@ccsemc.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change. Modular approval. Output power listed is conducted. This grant is approved only when the module is installed by the grantee or their OEM integrator in the multifunction digital systems which are produced by the grantee with the antennas specified in this filing. Use of this module in other hosts or use of different antennas not listed in this filing requires additional certification filings. Compliance of this device in all final host configurations is the responsibility of the grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 4R9jkGLC8A9TyNEXMr5imA== | 2010-09-27 | Class II permissive change or modification of presently authorized equipment |
| yoYn+lZ+dwe3RtB3BLoTmw== | 2010-08-24 | Change in identification of presently authorized equipment. Original FCC ID: PPD-AR5B95 Grant Date: 12/12/2008 |
| 8Vqh8TyKc3v+mTHSLym/hA== | 2010-08-23 | Change in identification of presently authorized equipment. Original FCC ID: PPD-AR5B95 Grant Date: 12/12/2008 |
Equipment Authorization
Grants
TCB Grant - Application yoYn+lZ+dwe3RtB3BLoTmw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 08/24/2010 Application Dated: 08/24/2010 |
| Toshiba TEC Corporation |
| 6-78, Minami-cho |
| Mishima-shi, Shizuoka-ken, 411-8520 Japan |
| Attention: Tatsuyuki Miura |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BJI-GN1060 |
| Name of Grantee: | Toshiba TEC Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Wireless LAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application yoYn+lZ+dwe3RtB3BLoTmw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Toshiba TEC Corporation 6-78, Minami-cho Mishima-shi, Shizuoka-ken, 411-8520 Japan |
Date of Grant: 08/24/2010 Application Dated: 08/24/2010 |
| Attention: Tatsuyuki Miura |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BJI-GN1060 |
| Name of Grantee: | Toshiba TEC Corporation |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Wireless LAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 08/23/2010 Application Dated: 08/23/2010 |
| Toshiba TEC Corporation |
| 6-78, Minami-cho |
| Mishima-shi, Shizuoka-ken, 411-8520 Japan |
| Attention: Tatsuyuki Miura |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BJI-GN1060 |
| Name of Grantee: | Toshiba TEC Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.332 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.337 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.157 |
| Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filing may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 8Vqh8TyKc3v+mTHSLym/hA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Toshiba TEC Corporation 6-78, Minami-cho Mishima-shi, Shizuoka-ken, 411-8520 Japan |
Date of Grant: 08/23/2010 Application Dated: 08/23/2010 |
| Attention: Tatsuyuki Miura |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BJI-GN1060 |
| Name of Grantee: | Toshiba TEC Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.332 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.337 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.157 |
| Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filing may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/27/2010 Application Dated: 09/27/2010 |
| Toshiba TEC Corporation |
| 6-78, Minami-cho |
| Mishima-shi, Shizuoka-ken, 411-8520 Japan |
| Attention: Tatsuyuki Miura |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BJI-GN1060 |
| Name of Grantee: | Toshiba TEC Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2412.0 - 2462.0 | 0.332 | ||
| 20 | 15C | 2412.0 - 2462.0 | 0.337 | ||
| 20 | 15C | 2422.0 - 2452.0 | 0.157 |
| Class II permissive change. Modular approval. Output power listed is conducted. This grant is approved only when the module is installed by the grantee or their OEM integrator in the multifunction digital systems which are produced by the grantee with the antennas specified in this filing. Use of this module in other hosts or use of different antennas not listed in this filing requires additional certification filings. Compliance of this device in all final host configurations is the responsibility of the grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application 4R9jkGLC8A9TyNEXMr5imA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Toshiba TEC Corporation 6-78, Minami-cho Mishima-shi, Shizuoka-ken, 411-8520 Japan |
Date of Grant: 09/27/2010 Application Dated: 09/27/2010 |
| Attention: Tatsuyuki Miura |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BJI-GN1060 |
| Name of Grantee: | Toshiba TEC Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 15C | 2412.0 - 2462.0 | 0.332 | ||
| 20 | 15C | 2412.0 - 2462.0 | 0.337 | ||
| 20 | 15C | 2422.0 - 2452.0 | 0.157 |
| Class II permissive change. Modular approval. Output power listed is conducted. This grant is approved only when the module is installed by the grantee or their OEM integrator in the multifunction digital systems which are produced by the grantee with the antennas specified in this filing. Use of this module in other hosts or use of different antennas not listed in this filing requires additional certification filings. Compliance of this device in all final host configurations is the responsibility of the grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: |