FCC ID BKMAE-WLU5000
Wireless LAN Module
by Seiko Epson Corporation
Grantee Code: BKM Product Code: AEWLU5000
Latest application date: 2016-08-25
Device Images
FCC ID Device Details
| FCC ID | BKMAE-WLU5000 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | BKM |
| Product Code | AEWLU5000 |
| Applicant Business | Seiko Epson Corporation 🇯🇵 |
| Related Domains |  exc.epson.co.jp |
| Equipment Class | Wireless LAN Module |
| Test Firm | Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2016-08-25 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2016-07-21 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2016-07-21 |
| 5180-5240 MHz | Original Equipment | 2016-06-02 |
| 2412-2462 MHz | Original Equipment | 2016-06-02 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2016-08-25 | PDF 3 MB |
| User Manual | Users Manual | 2016-07-21 | PDF 1 MB |
| Users Manual | Users Manual | 2016-06-02 | PDF 830.5 KB |
| Users Manual (Statement) | Users Manual | 2016-06-02 | PDF 10.5 KB |
| Internal Photos | Internal Photos | 2016-08-25 | PDF 987.6 KB |
| Internal Photos_rev | Internal Photos | 2016-07-21 | PDF 1.1 MB |
| Internal Photos | Internal Photos | 2016-06-02 | PDF 371.5 KB |
| External Photos | External Photos | 2016-08-25 | PDF 522.4 KB |
| External Photos | External Photos | 2016-07-21 | PDF 503.6 KB |
| External Photos | External Photos | 2016-06-02 | PDF 161.5 KB |
| Label sample & Label Location | ID Label/Location Info | 2016-08-25 | PDF 172.7 KB |
| Label sample & Label Location | ID Label/Location Info | 2016-07-21 | PDF 172.9 KB |
| Label Location | ID Label/Location Info | 2016-06-02 | PDF 55.3 KB |
| Label Sample | ID Label/Location Info | 2016-06-02 | PDF 742.2 KB |
| Test Set up photo | Test Setup Photos | 2016-08-25 | PDF 425.8 KB |
| Test Set up photo | Test Setup Photos | 2016-07-21 | PDF 219.7 KB |
| Test Set Up Photos | Test Setup Photos | 2016-06-02 | PDF 527 KB |
| Test Report (Co-located) | Test Report | 2016-08-25 | PDF 189.8 KB |
| Test Report (Co-located)_rev | Test Report | 2016-07-21 | PDF 205 KB |
| Test Report (DTS)_rev | Test Report | 2016-06-02 | PDF 805.1 KB |
| Test Report (NII)_rev | Test Report | 2016-06-02 | PDF 563.4 KB |
| Attestation (Channel and Mode Declaration) | Attestation Statements | 2016-06-02 | PDF 28.2 KB |
| Cover Letter (Agent Authorization) | Cover Letter(s) | 2016-08-25 | PDF 231.6 KB |
| Cover Letter (Description of Change) | Cover Letter(s) | 2016-08-25 | PDF 57.2 KB |
| Cover Letter (Agent Authorization) | Cover Letter(s) | 2016-07-21 | PDF 15.3 KB |
| Cover Letter (Description of Change)_rev | Cover Letter(s) | 2016-07-21 | PDF 59.2 KB |
| Confidentiality Request | Cover Letter(s) | 2016-06-02 | PDF 41.5 KB |
| Cover Letter (Agent Authorization) | Cover Letter(s) | 2016-06-02 | PDF 37.7 KB |
| Cover Letter (Modular Approval Request) | Cover Letter(s) | 2016-06-02 | PDF 52.7 KB |
| RF Exposure Info (MPE) | RF Exposure Info | 2016-08-25 | PDF 95.2 KB |
| RF Exposure Info (MPE) | RF Exposure Info | 2016-07-21 | PDF 95.8 KB |
| RF Exposure Info (MPE) | RF Exposure Info | 2016-06-02 | PDF 63.4 KB |
| Block Diagram Metadata only | Block Diagram | PDF 243.3 KB | |
| Block Diagram (module spec.)_rev Metadata only | Block Diagram | PDF 766.5 KB | |
| Schematics_rev Metadata only | Schematics | PDF 359.6 KB | |
| Operational Description_rev Metadata only | Operational Description | PDF 21.9 KB | |
| Software Operating Description Metadata only | Operational Description | PDF 1.2 MB |
Application Information
| Application ID | j2Jeqd1uLlkcZFULRh7Zzw== |
|---|---|
| Final Action Date | 2016-08-25 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0026669846 |
| Model | AE-WLU5000 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wireless LAN Module |
| Responsible Party | Yoshinobu Murakami, CS/Quality Assurance Department, murakami.yoshinobu@exc.epson.co.jp , 81-266-52-3131 |
| Test Firm | Richard Chen, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, richard.chen@bureauveritas.com  , +886-(0)3-260-0884 |
| TCB Email | certification@curtis-straus.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change as described in this filing. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used with this module must be not be co-located or operating in conjunction with any other antenna or transmitter, except as documented in filings under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth mode. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| j2Jeqd1uLlkcZFULRh7Zzw== | 2016-08-25 | Class II permissive change or modification of presently authorized equipment |
| yVPi7P97HAv9kk3iRre/xg== | 2016-07-21 | Class II permissive change or modification of presently authorized equipment |
| 5NSGCvL717YQSTOFFoRjEw== | 2016-07-21 | Class II permissive change or modification of presently authorized equipment |
| WWJBXRkc1mlHcYsX4lDy0Q== | 2016-06-02 | Original Equipment |
| MB2/JBlhmyY71O1RcMlRlw== | 2016-06-02 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application yVPi7P97HAv9kk3iRre/xg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 07/21/2016 Application Dated: 07/21/2016 |
| Seiko Epson Corporation |
| 3-3-5 Owa Suwa-shi |
| Nagano-Ken 392-8502, Japan |
| Attention: Yoshinobu Murakami , CS/Quality Assurance Department |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BKMAE-WLU5000 |
| Name of Grantee: | Seiko Epson Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless LAN Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.084 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.084 |
| Class II Permissive Change as described in this filing. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used with this module must be not be co-located or operating in conjunction with any other antenna or transmitter, except as documented in filings under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz , 40 MHz and 80MHz bandwidth mode. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application yVPi7P97HAv9kk3iRre/xg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Seiko Epson Corporation 3-3-5 Owa Suwa-shi Nagano-Ken 392-8502, Japan |
Date of Grant: 07/21/2016 Application Dated: 07/21/2016 |
| Attention: Yoshinobu Murakami , CS/Quality Assurance Department |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BKMAE-WLU5000 |
| Name of Grantee: | Seiko Epson Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless LAN Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.084 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.084 |
| Class II Permissive Change as described in this filing. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used with this module must be not be co-located or operating in conjunction with any other antenna or transmitter, except as documented in filings under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz , 40 MHz and 80MHz bandwidth mode. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 06/02/2016 Application Dated: 06/02/2016 |
| Seiko Epson Corporation |
| 3-3-5 Owa Suwa-shi |
| Nagano-Ken 392-8502, Japan |
| Attention: Yoshinobu Murakami , CS/Quality Assurance Department |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BKMAE-WLU5000 |
| Name of Grantee: | Seiko Epson Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless LAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.084 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.084 |
| Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used with this module must be not be co-located or operating in conjunction with any other antenna or transmitter, except as documented in filings under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz , 40 MHz and 80MHz bandwidth mode. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application WWJBXRkc1mlHcYsX4lDy0Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Seiko Epson Corporation 3-3-5 Owa Suwa-shi Nagano-Ken 392-8502, Japan |
Date of Grant: 06/02/2016 Application Dated: 06/02/2016 |
| Attention: Yoshinobu Murakami , CS/Quality Assurance Department |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BKMAE-WLU5000 |
| Name of Grantee: | Seiko Epson Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless LAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.084 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.084 |
| Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used with this module must be not be co-located or operating in conjunction with any other antenna or transmitter, except as documented in filings under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz , 40 MHz and 80MHz bandwidth mode. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 06/02/2016 Application Dated: 06/02/2016 |
| Seiko Epson Corporation |
| 3-3-5 Owa Suwa-shi |
| Nagano-Ken 392-8502, Japan |
| Attention: Yoshinobu Murakami , CS/Quality Assurance Department |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BKMAE-WLU5000 |
| Name of Grantee: | Seiko Epson Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.413 |
| Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used with this module must be not be co-located or operating in conjunction with any other antenna or transmitter, except as documented in filings under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application MB2/JBlhmyY71O1RcMlRlw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Seiko Epson Corporation 3-3-5 Owa Suwa-shi Nagano-Ken 392-8502, Japan |
Date of Grant: 06/02/2016 Application Dated: 06/02/2016 |
| Attention: Yoshinobu Murakami , CS/Quality Assurance Department |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BKMAE-WLU5000 |
| Name of Grantee: | Seiko Epson Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.413 |
| Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used with this module must be not be co-located or operating in conjunction with any other antenna or transmitter, except as documented in filings under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 08/25/2016 Application Dated: 08/25/2016 |
| Seiko Epson Corporation |
| 3-3-5 Owa Suwa-shi |
| Nagano-Ken 392-8502, Japan |
| Attention: Yoshinobu Murakami , CS/Quality Assurance Department |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BKMAE-WLU5000 |
| Name of Grantee: | Seiko Epson Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.413 |
| Class II Permissive Change as described in this filing. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used with this module must be not be co-located or operating in conjunction with any other antenna or transmitter, except as documented in filings under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application j2Jeqd1uLlkcZFULRh7Zzw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Seiko Epson Corporation 3-3-5 Owa Suwa-shi Nagano-Ken 392-8502, Japan |
Date of Grant: 08/25/2016 Application Dated: 08/25/2016 |
| Attention: Yoshinobu Murakami , CS/Quality Assurance Department |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BKMAE-WLU5000 |
| Name of Grantee: | Seiko Epson Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.413 |
| Class II Permissive Change as described in this filing. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used with this module must be not be co-located or operating in conjunction with any other antenna or transmitter, except as documented in filings under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 07/21/2016 Application Dated: 07/21/2016 |
| Seiko Epson Corporation |
| 3-3-5 Owa Suwa-shi |
| Nagano-Ken 392-8502, Japan |
| Attention: Yoshinobu Murakami , CS/Quality Assurance Department |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BKMAE-WLU5000 |
| Name of Grantee: | Seiko Epson Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.413 |
| Class II Permissive Change as described in this filing. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used with this module must be not be co-located or operating in conjunction with any other antenna or transmitter, except as documented in filings under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 5NSGCvL717YQSTOFFoRjEw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Seiko Epson Corporation 3-3-5 Owa Suwa-shi Nagano-Ken 392-8502, Japan |
Date of Grant: 07/21/2016 Application Dated: 07/21/2016 |
| Attention: Yoshinobu Murakami , CS/Quality Assurance Department |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BKMAE-WLU5000 |
| Name of Grantee: | Seiko Epson Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.413 |
| Class II Permissive Change as described in this filing. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used with this module must be not be co-located or operating in conjunction with any other antenna or transmitter, except as documented in filings under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |