FCC ID BKMFBM291A
Bluetooth Interface Board
by Seiko Epson Corporation
Grantee Code: BKM Product Code: FBM291A
Latest application date: 2017-11-08
FCC ID Device Details
| FCC ID | BKMFBM291A |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | BKM |
| Product Code | FBM291A |
| Applicant Business | Seiko Epson Corporation 🇯🇵 |
| Related Domains |  exc.epson.co.jp |
| Equipment Class | Bluetooth Interface Board |
| Test Firm | UL Japan, Inc. Shonan EMC EMC Lab. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2017-11-08 |
| 2402-2480 MHz | Original Equipment | 2012-08-30 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| 04 User Manual | Users Manual | 2017-11-08 | PDF 19 KB |
| User Manual | Users Manual | 2012-09-17 | PDF 13.9 KB |
| Internal Photos | Internal Photos | 2012-09-17 | PDF 62 KB |
| External Photos | External Photos | 2012-09-17 | PDF 104.2 KB |
| ID Label | ID Label/Location Info | 2012-08-30 | PDF 226.6 KB |
| Test Setup Photos | Test Setup Photos | 2012-09-17 | PDF 235.8 KB |
| Test Report | Test Report | 2012-08-30 | PDF 1.4 MB |
| 02 FCC Authorization Letter | Cover Letter(s) | 2017-11-08 | PDF 108.2 KB |
| 02 FCC Class II Permissive Change Letter | Cover Letter(s) | 2017-11-08 | PDF 109.9 KB |
| 02 FCC MA Letter | Cover Letter(s) | 2017-11-08 | PDF 165.5 KB |
| Authorization Letter | Cover Letter(s) | 2012-08-30 | PDF 931.2 KB |
| Request for Modular Approval | Cover Letter(s) | 2012-08-30 | PDF 62.3 KB |
| Request for confidentiality | Cover Letter(s) | 2012-08-30 | PDF 72.1 KB |
| 03 FCC RF Exposure_DSS | RF Exposure Info | 2017-11-08 | PDF 113.5 KB |
| RF Exposure Info | RF Exposure Info | 2012-08-30 | PDF 80.3 KB |
Application Information
| Application ID | WJZ+d2zrizFvSr/pahTdOQ== |
|---|---|
| Final Action Date | 2017-11-08 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0026669846 |
| Model | FBM291A |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Bluetooth Interface Board |
| Responsible Party | Yoshinobu Murakami, CS/Quality Assurance Department, murakami.yoshinobu@exc.epson.co.jp , 81-266-52-3131 |
| Agent | Yoshihisa Yoshihisa Yoshihisa, UL Japan, Inc., Yoshihisa.Maeda@ul.com  , 81-596-24-8999 |
| Technical Contact | Toyokazu Imamura, UL Japan, Inc., Toyokazu.Imamura@ul.com , 81-463-50-6400 |
| Test Firm | Tetsuya Hashimoto, UL Japan, Inc. Shonan EMC EMC Lab., Tetsuya.Hashimoto@jp.ul.com  , +81-596-24-8116 |
| TCB Email | emc.jp@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to change from mobile device to portable device and change the product name. Single modular approval. Output power listed is conducted(Peak). Compliance of this device in all final host configurations is the responsibility of the Grantee. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| WJZ+d2zrizFvSr/pahTdOQ== | 2017-11-08 | Class II permissive change or modification of presently authorized equipment |
| FWh8CwWT3dENSVj6QnSGgQ== | 2012-08-30 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0020000 | 15C |
Grants
TCB Grant - Application WJZ+d2zrizFvSr/pahTdOQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 11/08/2017 Application Dated: 11/08/2017 |
| Seiko Epson Corporation |
| 3-3-5 Owa Suwa-shi |
| Nagano-Ken 392-8502, Japan |
| Attention: Yoshinobu Murakami , CS/Quality Assurance Department |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BKMFBM291A |
| Name of Grantee: | Seiko Epson Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Interface Board |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.002 |
| Class II Permissive Change to change from mobile device to portable device and change the product name. Single modular approval. Output power listed is conducted(Peak). Compliance of this device in all final host configurations is the responsibility of the Grantee. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application WJZ+d2zrizFvSr/pahTdOQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Seiko Epson Corporation 3-3-5 Owa Suwa-shi Nagano-Ken 392-8502, Japan |
Date of Grant: 11/08/2017 Application Dated: 11/08/2017 |
| Attention: Yoshinobu Murakami , CS/Quality Assurance Department |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BKMFBM291A |
| Name of Grantee: | Seiko Epson Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Interface Board |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.002 |
| Class II Permissive Change to change from mobile device to portable device and change the product name. Single modular approval. Output power listed is conducted(Peak). Compliance of this device in all final host configurations is the responsibility of the Grantee. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 08/30/2012 Application Dated: 08/30/2012 |
| Seiko Epson Corporation |
| 3-3-5 Owa Suwa-shi |
| Nagano-Ken 392-8502, Japan |
| Attention: Yoshinobu Murakami , CS/Quality Assurance Department |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BKMFBM291A |
| Name of Grantee: | Seiko Epson Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Interface Board for Mobile Printer |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.002 |
| Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application FWh8CwWT3dENSVj6QnSGgQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Seiko Epson Corporation 3-3-5 Owa Suwa-shi Nagano-Ken 392-8502, Japan |
Date of Grant: 08/30/2012 Application Dated: 08/30/2012 |
| Attention: Yoshinobu Murakami , CS/Quality Assurance Department |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BKMFBM291A |
| Name of Grantee: | Seiko Epson Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Interface Board for Mobile Printer |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.002 |
| Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators and End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |