FCC ID BRWDAMTX12
X1TXP 2.4GHz Transmitter
by Horizon Hobby, LLC
Grantee Code: BRW Product Code: DAMTX12
Latest application date: 2017-11-30
Device Images
FCC ID Device Details
| FCC ID | BRWDAMTX12 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | BRW |
| Product Code | DAMTX12 |
| Applicant Business | Horizon Hobby, LLC 🇺🇸 |
| Related Domains |  horizonhobby.com |
| Equipment Class | X1TXP 2.4GHz Transmitter |
| Test Firm | Bay Area Compliance Laboratories Corporation |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2478 MHz | Class II permissive change or modification of presently authorized equipment | 2017-11-30 |
| 2402-2478 MHz | Class II permissive change or modification of presently authorized equipment | 2017-03-08 |
| 2402-2478 MHz | Original Equipment | 2013-08-20 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Exhibit D Users Manual per 2 1033 b3 | Users Manual | 2017-03-08 | PDF 32.7 KB |
| Users Manual | Users Manual | 2013-08-20 | PDF 32.7 KB |
| Int Photos | Internal Photos | 2013-08-20 | PDF 120.6 KB |
| Ext Photos | External Photos | 2013-08-20 | PDF 111.3 KB |
| FCC ID Label | ID Label/Location Info | 2013-08-20 | PDF 93.7 KB |
| Test Setup Photos | Test Setup Photos | 2013-08-20 | PDF 260 KB |
| Test Report | Test Report | 2013-08-20 | PDF 198.1 KB |
| Cover Letter Requesting Class II Permissive Change | Cover Letter(s) | 2017-11-30 | PDF 93 KB |
| Cover Letter Requesting Class II Permissive Change | Cover Letter(s) | 2017-03-08 | PDF 28.5 KB |
| Cover Letter Requesting Modular Approval | Cover Letter(s) | 2017-03-08 | PDF 34.5 KB |
| Confidentiality Letter | Cover Letter(s) | 2013-08-20 | PDF 27.3 KB |
| Module Approval Letter | Cover Letter(s) | 2013-08-20 | PDF 34.5 KB |
| POA | Cover Letter(s) | 2013-08-20 | PDF 32.9 KB |
Application Information
| Application ID | xb28sjs5pk/iRWFHMb3vwA== |
|---|---|
| Final Action Date | 2017-11-30 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0006301931 |
| Model | DAMTX12 |
| Frequency Range | 2402-2478 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | X1TXP 2.4GHz Transmitter |
| Responsible Party | Jason Rosa, Lead Quality and Compliance Associate, compliance@horizonhobby.com , 217-403-3218 |
| Test Firm | Lisa Tang, Bay Area Compliance Laboratories Corporation, lisat@baclcorp.com  , 408-732-9162 |
| TCB Email | decrowder@elitetest.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output listed is conducted. Information regarding how to install or remove this RF module must not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is also approved for use in the specific hand-held and hand-operated controllers described in this filing, and end-users must be provided with specific operating instructions to maintain a separation distance of at least 5 cm between the antenna of this device and all persons, for satisfying RF exposure compliance. Class 2 permissive change to update grant note. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| xb28sjs5pk/iRWFHMb3vwA== | 2017-11-30 | Class II permissive change or modification of presently authorized equipment |
| qfApEYwfOopCVnGb7Oy0LQ== | 2017-03-08 | Class II permissive change or modification of presently authorized equipment |
| W0jcBFolwZJA/xIj8if+KA== | 2013-08-20 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2478 MHz | 0.1000000 | 15C |
Grants
TCB Grant - Application xb28sjs5pk/iRWFHMb3vwA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515 |
Date of Grant: 11/30/2017 Application Dated: 11/30/2017 |
| Horizon Hobby, LLC |
| 2904 Research Rd. |
| Champaign, IL 61822 |
| Attention: Jason Rosa , Lead Quality and Compliance Associate |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BRWDAMTX12 |
| Name of Grantee: | Horizon Hobby, LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | X1TXP 2.4GHz Transmitter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2478.0 | 0.1 |
| Power output listed is conducted. Information regarding how to install or remove this RF module must not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is also approved for use in the specific hand-held and hand-operated controllers described in this filing, and end-users must be provided with specific operating instructions to maintain a separation distance of at least 5 cm between the antenna of this device and all persons, for satisfying RF exposure compliance. Class 2 permissive change to update grant note. |
EAS Grant - Application xb28sjs5pk/iRWFHMb3vwA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Horizon Hobby, LLC 2904 Research Rd. Champaign, IL 61822 United States |
Date of Grant: 11/30/2017 Application Dated: 11/30/2017 |
| Attention: Jason Rosa , Lead Quality and Compliance Associate |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BRWDAMTX12 |
| Name of Grantee: | Horizon Hobby, LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | X1TXP 2.4GHz Transmitter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2478.0 | 0.1 |
| Power output listed is conducted. Information regarding how to install or remove this RF module must not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is also approved for use in the specific hand-held and hand-operated controllers described in this filing, and end-users must be provided with specific operating instructions to maintain a separation distance of at least 5 cm between the antenna of this device and all persons, for satisfying RF exposure compliance. Class 2 permissive change to update grant note. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 08/20/2013 Application Dated: 08/20/2013 |
| Horizon Hobby, LLC |
| 4105 Fieldstone Road |
| Champaign, IL 61821 |
| Attention: Mike Dunne , Executive VP of Product Development |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BRWDAMTX12 |
| Name of Grantee: | Horizon Hobby, LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4 GHz Transceiver Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2478.0 | 0.1 |
| Power output listed is conducted. Limited Modular Approval (LMA) restricted to installation in devices manufactured by the Grantee. Information regarding how to install or remove this RF module must not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is also approved for use in the specific hand-held and hand-operated controllers described in this filing, and end-users must be provided with specific operating instructions to maintain a separation distance of at least 5 cm between the antenna of this device and all persons, for satisfying RF exposure compliance. |
EAS Grant - Application W0jcBFolwZJA/xIj8if+KA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Horizon Hobby, LLC 4105 Fieldstone Road Champaign, IL 61821 United States |
Date of Grant: 08/20/2013 Application Dated: 08/20/2013 |
| Attention: Mike Dunne , Executive VP of Product Development |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BRWDAMTX12 |
| Name of Grantee: | Horizon Hobby, LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4 GHz Transceiver Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2478.0 | 0.1 |
| Power output listed is conducted. Limited Modular Approval (LMA) restricted to installation in devices manufactured by the Grantee. Information regarding how to install or remove this RF module must not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is also approved for use in the specific hand-held and hand-operated controllers described in this filing, and end-users must be provided with specific operating instructions to maintain a separation distance of at least 5 cm between the antenna of this device and all persons, for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515 |
Date of Grant: 03/08/2017 Application Dated: 03/08/2017 |
| Horizon Hobby, LLC |
| 4105 Fieldstone Road |
| Champaign, IL 61821 |
| Attention: William Vallee , Executive VP of Global Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BRWDAMTX12 |
| Name of Grantee: | Horizon Hobby, LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | X1TXP 2.4GHz Transmitter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2478.0 | 0.1 |
| Power output listed is conducted. Information regarding how to install or remove this RF module must not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is also approved for use in the specific hand-held and hand-operated controllers described in this filing, and end-users must be provided with specific operating instructions to maintain a separation distance of at least 5 cm between the antenna of this device and all persons, for satisfying RF exposure compliance. Class 2 permissive change from limited module to single module. |
EAS Grant - Application qfApEYwfOopCVnGb7Oy0LQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Horizon Hobby, LLC 4105 Fieldstone Road Champaign, IL 61821 United States |
Date of Grant: 03/08/2017 Application Dated: 03/08/2017 |
| Attention: William Vallee , Executive VP of Global Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BRWDAMTX12 |
| Name of Grantee: | Horizon Hobby, LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | X1TXP 2.4GHz Transmitter |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2478.0 | 0.1 |
| Power output listed is conducted. Information regarding how to install or remove this RF module must not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This module is also approved for use in the specific hand-held and hand-operated controllers described in this filing, and end-users must be provided with specific operating instructions to maintain a separation distance of at least 5 cm between the antenna of this device and all persons, for satisfying RF exposure compliance. Class 2 permissive change from limited module to single module. |
| Mail To: |