FCC ID BV8M803M

FCC ID	BV8M803M
Mirrors	fcc.id \| gov \| fccid.ai
Grantee Code	BV8
Product Code	M803M
Applicant Business	Harris Corporation 🇺🇸
Related Domains	harris.com
Equipment Class	OpenSky M-803 Mobile Radio Systems

Frequency Range	Application Purpose	Final Action Date
806-821 MHz	Class II permissive change or modification of presently authorized equipment	2008-11-27
806-821 MHz	Class II permissive change or modification of presently authorized equipment	2006-08-11
806-821 MHz	Class II permissive change or modification of presently authorized equipment	2005-10-26
806-821 MHz	Class II permissive change or modification of presently authorized equipment	2005-02-24
806-824 MHz	Class II permissive change or modification of presently authorized equipment	2004-10-06
806-824 MHz	Class II permissive change or modification of presently authorized equipment	2003-06-03
806-824 MHz	Original Equipment	2001-10-15

Document	Type	Available	File
Dash Mount Installation Guide	Users Manual	2001-10-15	PDF 536.6 KB
Operators Manual	Users Manual	2001-10-15	PDF 1.7 MB
Trunk Mount Installation Guide	Users Manual	2001-10-15	PDF 367.9 KB
Dash Mount Chassis	Internal Photos	2001-10-15	PDF 264.5 KB
Trunk Mount Chassis	Internal Photos	2001-10-15	PDF 212.9 KB
Trunk Mount Control Head	Internal Photos	2001-10-15	PDF 124.4 KB
Dash Mount Chassis	External Photos	2001-10-15	PDF 62.8 KB
Trunk Mount Chassis	External Photos	2001-10-15	PDF 57 KB
Trunk Mount Control Head	External Photos	2001-10-15	PDF 59.3 KB
Label info	ID Label/Location Info	2001-10-15	PDF 31.5 KB
Antenna info 1	Operational Description	2004-10-06	PDF 461.1 KB
Antenna info 2	Operational Description	2004-10-06	PDF 1.2 MB
Antenna info 3	Operational Description	2004-10-06	PDF 85.5 KB
Test report	Test Report	2008-11-27	PDF 530 KB
Test report	Test Report	2006-08-11	PDF 1.8 MB
Test report	Test Report	2005-10-26	PDF 2.7 MB
Test report	Test Report	2005-02-24	PDF 1.1 MB
Test report for 14k em designator	Test Report	2005-02-24	PDF 1.1 MB
Test Report	Test Report	2001-10-15	PDF 3 MB
POA	Cover Letter(s)	2008-11-27	PDF 33.1 KB
Reason for PC	Cover Letter(s)	2008-11-27	PDF 48.1 KB
POA	Cover Letter(s)	2006-08-11	PDF 56 KB
Reason for PC	Cover Letter(s)	2006-08-11	PDF 58.5 KB
Request for confidentiality	Cover Letter(s)	2006-08-11	PDF 58.1 KB
ATCB comments	Cover Letter(s)	2005-10-26	PDF 47 KB
POA	Cover Letter(s)	2005-10-26	PDF 75 KB
Reason for PC2	Cover Letter(s)	2005-10-26	PDF 75.5 KB
Request for confidentiality	Cover Letter(s)	2005-10-26	PDF 74 KB
Response to ATCB	Cover Letter(s)	2005-10-26	PDF 53 KB
POA	Cover Letter(s)	2005-02-24	PDF 75.1 KB
Reason for change	Cover Letter(s)	2005-02-24	PDF 118.3 KB
Request for Emissions designator change	Cover Letter(s)	2005-02-24	PDF 161.4 KB
Request for confidentiality	Cover Letter(s)	2005-02-24	PDF 55.4 KB
POA	Cover Letter(s)	2004-10-06	PDF 74.7 KB
Reason for PC2	Cover Letter(s)	2004-10-06	PDF 74.7 KB
Purpose of PC2	Cover Letter(s)	2003-06-03	PDF 8.2 KB
Letter of Agency	Cover Letter(s)	2001-10-15	PDF 70.4 KB
Request for Confidentiality	Cover Letter(s)	2001-10-15	PDF 81.9 KB
MPE report	RF Exposure Info	2004-10-06	PDF 524.3 KB
MPE report on new antennas	RF Exposure Info	2003-06-03	PDF 497.7 KB
Control Head Board Schematic Metadata only	Schematics		PDF 818.5 KB
Control Head Power Amp Schematic Metadata only	Schematics		PDF 217 KB
High Power Amp Board Metadata only	Schematics		PDF 472 KB
Processing Kernel Schematic Metadata only	Schematics		PDF 2.5 MB
Schematics Metadata only	Schematics		PDF 1.4 MB
Schematics Metadata only	Schematics		PDF 540.1 KB
Schematics Metadata only	Schematics		PDF 512.3 KB
Transceiver Schematic Metadata only	Schematics		PDF 1.2 MB
Operational Description Metadata only	Operational Description		PDF 118 KB
Operational description Metadata only	Operational Description		PDF 74.1 KB
Parts list and tune up info same as operational description Metadata only	Parts List/Tune Up Info		PDF 118 KB
Parts List Metadata only	Parts List/Tune Up Info		PDF 1.2 MB
Parts list Metadata only	Parts List/Tune Up Info		PDF 185.2 KB
Parts list Metadata only	Parts List/Tune Up Info		PDF 62.7 KB

Application ID	4qz6SX3Srjk1dyhAqsF6Qg==
Final Action Date	2008-11-27
Application Purpose	Class II permissive change or modification of presently authorized equipment
Applicant FRN	0004945812
Model	M803M
Frequency Range	806-821 MHz
Equipment Class	TNB - Licensed Non-Broadcast Station Transmitter
Device Description	OpenSky M-803 Mobile Radio Systems
Responsible Party	William Pertner, Regulatory Manager, william.pertner@harris.com , 434-455-9295
TCB Email	hotline@atcb.com
TCB Scope	B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97
Short-Term Confidentiality	No
Long-Term Confidentiality	No
Grant Deferral	No
Modular Equipment	Does not apply
Composite Device	No
Composite Part	No
Cognitive Radio	No
Authorization Waiver	No
Authorization Waiver Approved	No
Section 5301 Certification	Yes
Related OET Knowledge DataBase Inquiry	No
Grant Comments	Output is at the antenna terminal and must not exceed that tested for MPE compliance. This transmitter may operate only with the antennas listed in this filing. This device must transmit with a source-based time-averaging duty factor not exceeding 50%. The antenna(s)used for this transmitter must be installed to provide a separation distance of at least 43 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled MPE limits and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information.

Application ID	Date	Purpose
4qz6SX3Srjk1dyhAqsF6Qg==	2008-11-27	Class II permissive change or modification of presently authorized equipment
inWJlZYXCyosjbKqlutaFw==	2006-08-11	Class II permissive change or modification of presently authorized equipment
PI/jTO3MNZk67qnYg8+VUA==	2005-10-26	Class II permissive change or modification of presently authorized equipment
OYr6GvCSX2eTI0QYXS93MQ==	2005-02-24	Class II permissive change or modification of presently authorized equipment
mjtVIXbKTh0ULX8IxzOYLQ==	2004-10-06	Class II permissive change or modification of presently authorized equipment
QUMCPa0nw9y0FL902XTT5g==	2003-06-03	Class II permissive change or modification of presently authorized equipment
HqEen4801S+A/LQaWMOXuw==	2001-10-15	Original Equipment

Frequency	Output	Tolerance	Emission	Rules
806-824 MHz	25.0000000	1.5000000000ppm	11K8F1E	90
806-824 MHz	25	1.5ppm	8K40F1E	9
806-824 MHz	25	1.5ppm	11K8F1E	9
806-824 MHz	25	1.5ppm	12K8F9W	9
806-824 MHz	25	1.5ppm	11K8F1D	9
806-821 MHz	25	1.5ppm	16K0F3E	9
806-824 MHz	25	1.5ppm	8K40F1D	9
806-824 MHz	25	1.5ppm	8K4F1D	9
806-824 MHz	25	1.5ppm	8K4F1E	9
821-824 MHz	25	1.5ppm	14K0F3E	9
851-869 MHz	25	1.5ppm	8K4F1E	9
851-869 MHz	25	1.5ppm	8K40F1E	9
851-866 MHz	25	1.5ppm	16K0F3E	9
851-869 MHz	25	1.5ppm	8K40F1D	9
851-869 MHz	25	1.5ppm	8K4F1D	9
866-869 MHz	25	1.5ppm	14K0F3E	9

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 06/03/2003

Application Dated: 06/03/2003

Harris Corporation

221 Jefferson Ridge Parkway

Lynchburg, VA 24501

Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	BV8M803M

Name of Grantee:	Harris Corporation

Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	OpenSky M-803 Mobile Radio Systems

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	806.0 - 824.0	25.0	1.5 PM	11K8F1E
	90	806.0 - 824.0	25.0	1.5 PM	11K8F1D

Output is at the antenna terminal of the device and must not exceed that tested for MPE compliance. This transmitter may operate only with the antennas listed in this filing. This device must transmit with a source-based time-averaging duty factor not exceeding 50 %. The antenna(s)used for this transmitter must be installed to provide a separation distance of at least 43 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled MPE limits and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Harris Corporation
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
United States

Date of Grant: 06/03/2003

Application Dated: 06/03/2003

Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	BV8M803M

Name of Grantee:	Harris Corporation

Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	OpenSky M-803 Mobile Radio Systems
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	806.0 - 824.0	25.0	1.5 PM	11K8F1E
	90	806.0 - 824.0	25.0	1.5 PM	11K8F1D

Output is at the antenna terminal of the device and must not exceed that tested for MPE compliance. This transmitter may operate only with the antennas listed in this filing. This device must transmit with a source-based time-averaging duty factor not exceeding 50 %. The antenna(s)used for this transmitter must be installed to provide a separation distance of at least 43 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled MPE limits and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information.

TCB Grant - Application PI/jTO3MNZk67qnYg8+VUA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 10/26/2005

Application Dated: 10/26/2005

Harris Corporation

221 Jefferson Ridge Parkway

Lynchburg, VA 24501

Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	BV8M803M

Name of Grantee:	Harris Corporation

Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	OpenSky M-803 Mobile Radio Systems

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	806.0 - 824.0	25.0	1.5 PM	11K8F1E
	90	806.0 - 824.0	25.0	1.5 PM	11K8F1D
	90	821.0 - 824.0	25.0	1.5 PM	14K0F3E
	90	806.0 - 821.0	25.0	1.5 PM	16K0F3E
	90	851.0 - 866.0	25.0	1.5 PM	16K0F3E
	90	806.0 - 824.0	25.0	1.5 PM	8K40F1D
	90	851.0 - 869.0	25.0	1.5 PM	8K40F1D
	90	851.0 - 869.0	25.0	1.5 PM	8K40F1E
	90	866.0 - 869.0	25.0	1.5 PM	14K0F3E
	90	806.0 - 824.0	25.0	1.5 PM	8K40F1E

Output is at the antenna terminal and must not exceed that tested for MPE compliance. This transmitter may operate only with the antennas listed in this filing. This device must transmit with a source-based time-averaging duty factor not exceeding 50%. The antenna(s)used for this transmitter must be installed to provide a separation distance of at least 43 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled MPE limits and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Harris Corporation
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
United States

Date of Grant: 10/26/2005

Application Dated: 10/26/2005

Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	BV8M803M

Name of Grantee:	Harris Corporation

Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	OpenSky M-803 Mobile Radio Systems
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	806.0 - 824.0	25.0	1.5 PM	11K8F1E
	90	806.0 - 824.0	25.0	1.5 PM	11K8F1D
	90	821.0 - 824.0	25.0	1.5 PM	14K0F3E
	90	806.0 - 821.0	25.0	1.5 PM	16K0F3E
	90	851.0 - 866.0	25.0	1.5 PM	16K0F3E
	90	806.0 - 824.0	25.0	1.5 PM	8K40F1D
	90	851.0 - 869.0	25.0	1.5 PM	8K40F1D
	90	851.0 - 869.0	25.0	1.5 PM	8K40F1E
	90	866.0 - 869.0	25.0	1.5 PM	14K0F3E
	90	806.0 - 824.0	25.0	1.5 PM	8K40F1E

Output is at the antenna terminal and must not exceed that tested for MPE compliance. This transmitter may operate only with the antennas listed in this filing. This device must transmit with a source-based time-averaging duty factor not exceeding 50%. The antenna(s)used for this transmitter must be installed to provide a separation distance of at least 43 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled MPE limits and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information.

TCB Grant - Application OYr6GvCSX2eTI0QYXS93MQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 02/24/2005

Application Dated: 02/24/2005

Harris Corporation

221 Jefferson Ridge Parkway

Lynchburg, VA 24501

Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	BV8M803M

Name of Grantee:	Harris Corporation

Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	OpenSky M-803 Mobile Radio Systems

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	806.0 - 824.0	25.0	1.5 PM	11K8F1E
	90	806.0 - 824.0	25.0	1.5 PM	11K8F1D
	90	821.0 - 824.0	25.0	1.5 PM	14K0F3E
	90	866.0 - 869.0	25.0	1.5 PM	14K0F3E
	90	806.0 - 821.0	25.0	1.5 PM	16K0F3E
	90	851.0 - 866.0	25.0	1.5 PM	16K0F3E
	90	806.0 - 824.0	25.0	1.5 PM	8K4F1D
	90	806.0 - 824.0	25.0	1.5 PM	8K4F1E
	90	851.0 - 869.0	25.0	1.5 PM	8K4F1D
	90	851.0 - 869.0	25.0	1.5 PM	8K4F1E

Output is at the antenna terminal and must not exceed that tested for MPE compliance. This transmitter may operate only with the antennas listed in this filing. This device must transmit with a source-based time-averaging duty factor not exceeding 50%. The antenna(s)used for this transmitter must be installed to provide a separation distance of at least 43 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled MPE limits and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Harris Corporation
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
United States

Date of Grant: 02/24/2005

Application Dated: 02/24/2005

Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	BV8M803M

Name of Grantee:	Harris Corporation

Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	OpenSky M-803 Mobile Radio Systems
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	806.0 - 824.0	25.0	1.5 PM	11K8F1E
	90	806.0 - 824.0	25.0	1.5 PM	11K8F1D
	90	821.0 - 824.0	25.0	1.5 PM	14K0F3E
	90	866.0 - 869.0	25.0	1.5 PM	14K0F3E
	90	806.0 - 821.0	25.0	1.5 PM	16K0F3E
	90	851.0 - 866.0	25.0	1.5 PM	16K0F3E
	90	806.0 - 824.0	25.0	1.5 PM	8K4F1D
	90	806.0 - 824.0	25.0	1.5 PM	8K4F1E
	90	851.0 - 869.0	25.0	1.5 PM	8K4F1D
	90	851.0 - 869.0	25.0	1.5 PM	8K4F1E

Output is at the antenna terminal and must not exceed that tested for MPE compliance. This transmitter may operate only with the antennas listed in this filing. This device must transmit with a source-based time-averaging duty factor not exceeding 50%. The antenna(s)used for this transmitter must be installed to provide a separation distance of at least 43 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled MPE limits and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information.

TCB Grant - Application mjtVIXbKTh0ULX8IxzOYLQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 10/06/2004

Application Dated: 10/06/2004

Harris Corporation

221 Jefferson Ridge Parkway

Lynchburg, VA 24501

Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	BV8M803M

Name of Grantee:	Harris Corporation

Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	OpenSky M-803 Mobile Radio Systems

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	806.0 - 824.0	25.0	1.5 PM	11K8F1E
	90	806.0 - 824.0	25.0	1.5 PM	11K8F1D

Output is at the antenna terminal of the device and must not exceed that tested for MPE compliance. This transmitter may operate only with the antennas listed in this filing. This device must transmit with a source-based time-averaging duty factor not exceeding 50 %. The antenna(s)used for this transmitter must be installed to provide a separation distance of at least 43 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be restricted to work related operations in an occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled MPE limits and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Harris Corporation
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
United States

Date of Grant: 10/06/2004

Application Dated: 10/06/2004

Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	BV8M803M

Name of Grantee:	Harris Corporation

Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	OpenSky M-803 Mobile Radio Systems
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	806.0 - 824.0	25.0	1.5 PM	11K8F1E
	90	806.0 - 824.0	25.0	1.5 PM	11K8F1D

Output is at the antenna terminal of the device and must not exceed that tested for MPE compliance. This transmitter may operate only with the antennas listed in this filing. This device must transmit with a source-based time-averaging duty factor not exceeding 50 %. The antenna(s)used for this transmitter must be installed to provide a separation distance of at least 43 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be restricted to work related operations in an occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled MPE limits and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information.

TCB Grant - Application inWJlZYXCyosjbKqlutaFw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 08/11/2006

Application Dated: 08/10/2006

Harris Corporation

221 Jefferson Ridge Parkway

Lynchburg, VA 24501

Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	BV8M803M

Name of Grantee:	Harris Corporation

Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	OpenSky M-803 Mobile Radio Systems

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	806.0 - 824.0	25.0	1.5 PM	11K8F1E
	90	806.0 - 824.0	25.0	1.5 PM	11K8F1D
	90	821.0 - 824.0	25.0	1.5 PM	14K0F3E
	90	806.0 - 821.0	25.0	1.5 PM	16K0F3E
	90	851.0 - 866.0	25.0	1.5 PM	16K0F3E
	90	806.0 - 824.0	25.0	1.5 PM	8K40F1D
	90	851.0 - 869.0	25.0	1.5 PM	8K40F1D
	90	851.0 - 869.0	25.0	1.5 PM	8K40F1E
	90	866.0 - 869.0	25.0	1.5 PM	14K0F3E
	90	806.0 - 824.0	25.0	1.5 PM	8K40F1E

Output is at the antenna terminal and must not exceed that tested for MPE compliance. This transmitter may operate only with the antennas listed in this filing. This device must transmit with a source-based time-averaging duty factor not exceeding 50%. The antenna(s)used for this transmitter must be installed to provide a separation distance of at least 43 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled MPE limits and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Harris Corporation
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
United States

Date of Grant: 08/11/2006

Application Dated: 08/10/2006

Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	BV8M803M

Name of Grantee:	Harris Corporation

Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	OpenSky M-803 Mobile Radio Systems
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	806.0 - 824.0	25.0	1.5 PM	11K8F1E
	90	806.0 - 824.0	25.0	1.5 PM	11K8F1D
	90	821.0 - 824.0	25.0	1.5 PM	14K0F3E
	90	806.0 - 821.0	25.0	1.5 PM	16K0F3E
	90	851.0 - 866.0	25.0	1.5 PM	16K0F3E
	90	806.0 - 824.0	25.0	1.5 PM	8K40F1D
	90	851.0 - 869.0	25.0	1.5 PM	8K40F1D
	90	851.0 - 869.0	25.0	1.5 PM	8K40F1E
	90	866.0 - 869.0	25.0	1.5 PM	14K0F3E
	90	806.0 - 824.0	25.0	1.5 PM	8K40F1E

Output is at the antenna terminal and must not exceed that tested for MPE compliance. This transmitter may operate only with the antennas listed in this filing. This device must transmit with a source-based time-averaging duty factor not exceeding 50%. The antenna(s)used for this transmitter must be installed to provide a separation distance of at least 43 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled MPE limits and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information.

TCB Grant - Application HqEen4801S+A/LQaWMOXuw==

This application does not exist.

EAS Grant - Application HqEen4801S+A/LQaWMOXuw==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Harris Corporation
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
United States

Date of Grant: 10/15/2001

Application Dated: 08/21/2001

Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	BV8M803M

Name of Grantee:	Harris Corporation

Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	OpenSky M-803 Mobile Radio Systems
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	806.0 - 824.0	25.0	1.5 PM	11K8F1E

Output is at the antenna terminal of the device and must not exceed that tested for MPE compliance. This transmitter may operate only with the two antennas (0 dBi / 3 dBi gain) tested for this filing in Push-to-Talk mode. This device must transmit with a source-based time-averaging duty factor not exceeding 50 %. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 43 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled MPE limits and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information.

TCB Grant - Application 4qz6SX3Srjk1dyhAqsF6Qg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 11/27/2008

Application Dated: 11/26/2008

Harris Corporation

221 Jefferson Ridge Parkway

Lynchburg, VA 24501

Attention: William Pertner , Regulatory Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	BV8M803M

Name of Grantee:	Harris Corporation

Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	OpenSky M-803 Mobile Radio Systems

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	806.0 - 824.0	25.0	1.5 PM	11K8F1E
	90	806.0 - 824.0	25.0	1.5 PM	11K8F1D
	90	821.0 - 824.0	25.0	1.5 PM	14K0F3E
	90	866.0 - 869.0	25.0	1.5 PM	14K0F3E
	90	806.0 - 821.0	25.0	1.5 PM	16K0F3E
	90	851.0 - 866.0	25.0	1.5 PM	16K0F3E
	90	806.0 - 824.0	25.0	1.5 PM	8K40F1D
	90	806.0 - 824.0	25.0	1.5 PM	8K40F1E
	90	851.0 - 869.0	25.0	1.5 PM	8K40F1D
	90	851.0 - 869.0	25.0	1.5 PM	8K40F1E
	90	806.0 - 824.0	25.0	1.5 PM	12K8F9W

Output is at the antenna terminal and must not exceed that tested for MPE compliance. This transmitter may operate only with the antennas listed in this filing. This device must transmit with a source-based time-averaging duty factor not exceeding 50%. The antenna(s)used for this transmitter must be installed to provide a separation distance of at least 43 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled MPE limits and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Harris Corporation
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
United States

Date of Grant: 11/27/2008

Application Dated: 11/26/2008

Attention: William Pertner , Regulatory Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	BV8M803M

Name of Grantee:	Harris Corporation

Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	OpenSky M-803 Mobile Radio Systems
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	806.0 - 824.0	25.0	1.5 PM	11K8F1E
	90	806.0 - 824.0	25.0	1.5 PM	11K8F1D
	90	821.0 - 824.0	25.0	1.5 PM	14K0F3E
	90	866.0 - 869.0	25.0	1.5 PM	14K0F3E
	90	806.0 - 821.0	25.0	1.5 PM	16K0F3E
	90	851.0 - 866.0	25.0	1.5 PM	16K0F3E
	90	806.0 - 824.0	25.0	1.5 PM	8K40F1D
	90	806.0 - 824.0	25.0	1.5 PM	8K40F1E
	90	851.0 - 869.0	25.0	1.5 PM	8K40F1D
	90	851.0 - 869.0	25.0	1.5 PM	8K40F1E
	90	806.0 - 824.0	25.0	1.5 PM	12K8F9W

Output is at the antenna terminal and must not exceed that tested for MPE compliance. This transmitter may operate only with the antennas listed in this filing. This device must transmit with a source-based time-averaging duty factor not exceeding 50%. The antenna(s)used for this transmitter must be installed to provide a separation distance of at least 43 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled MPE limits and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information.

Mail To:

OpenSky M-803 Mobile Radio Systems

by Harris Corporation

Grantee Code: BV8 Product Code: M803M

Latest application date: 2008-11-27

FCC ID Device Details

Operating Frequencies

Exhibits

Application Information

Applications

Equipment Authorization

Grants

TCB Grant - Application QUMCPa0nw9y0FL902XTT5g==

EAS Grant - Application QUMCPa0nw9y0FL902XTT5g==

TCB Grant - Application PI/jTO3MNZk67qnYg8+VUA==

EAS Grant - Application PI/jTO3MNZk67qnYg8+VUA==

TCB Grant - Application OYr6GvCSX2eTI0QYXS93MQ==

EAS Grant - Application OYr6GvCSX2eTI0QYXS93MQ==

TCB Grant - Application mjtVIXbKTh0ULX8IxzOYLQ==

EAS Grant - Application mjtVIXbKTh0ULX8IxzOYLQ==

TCB Grant - Application inWJlZYXCyosjbKqlutaFw==

EAS Grant - Application inWJlZYXCyosjbKqlutaFw==

TCB Grant - Application HqEen4801S+A/LQaWMOXuw==

EAS Grant - Application HqEen4801S+A/LQaWMOXuw==

TCB Grant - Application 4qz6SX3Srjk1dyhAqsF6Qg==

EAS Grant - Application 4qz6SX3Srjk1dyhAqsF6Qg==