FCC ID BV8M803VTAC
M-803 Vehicular Tactical Unit (VTAC)
by Harris Corporation
Grantee Code: BV8 Product Code: M803VTAC
Latest application date: 2008-11-27
FCC ID Device Details
| FCC ID | BV8M803VTAC |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | BV8 |
| Product Code | M803VTAC |
| Applicant Business | Harris Corporation 🇺🇸 |
| Related Domains |  harris.com |
| Equipment Class | M-803 Vehicular Tactical Unit (VTAC) |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 806-824 MHz | Class II permissive change or modification of presently authorized equipment | 2008-11-27 |
| 806-824 MHz | Class II permissive change or modification of presently authorized equipment | 2004-10-06 |
| 806-824 MHz | Class II permissive change or modification of presently authorized equipment | 2003-06-03 |
| 806-824 MHz | Original Equipment | 2002-10-01 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Installation Guide | Users Manual | 2002-10-01 | PDF 1.5 MB |
| Operators Manual | Users Manual | 2002-10-01 | PDF 1.7 MB |
| Internal Photos | Internal Photos | 2002-10-01 | PDF 1.3 MB |
| External Photos | External Photos | 2002-10-01 | PDF 1.1 MB |
| Label | ID Label/Location Info | 2002-10-01 | PDF 333.7 KB |
| Label Location and Text | ID Label/Location Info | 2002-10-01 | PDF 471.3 KB |
| Warning Label Placement | ID Label/Location Info | 2002-10-01 | PDF 189.3 KB |
| Warning Label Text | ID Label/Location Info | 2002-10-01 | PDF 217.5 KB |
| SCHEMATIC CONFIDENTIALITY REQUEST | Cover Letter(s) | 2002-10-01 | PDF 2.1 KB |
| Antenna info 1 | Operational Description | 2004-10-06 | PDF 461.1 KB |
| Antenna info 2 | Operational Description | 2004-10-06 | PDF 1.2 MB |
| Antenna info 3 | Operational Description | 2004-10-06 | PDF 85.5 KB |
| Test Setup Photos | Test Setup Photos | 2002-10-01 | PDF 1.1 MB |
| Test report | Test Report | 2008-11-27 | PDF 465.8 KB |
| Report Appendix A | Test Report | 2002-10-01 | PDF 106 KB |
| Report Appendix B | Test Report | 2002-10-01 | PDF 109.5 KB |
| Test Report | Test Report | 2002-10-01 | PDF 1.3 MB |
| Test Report amendment to show conducted spurious compliance at low and mid power | Test Report | 2002-10-01 | PDF 341.5 KB |
| POA | Cover Letter(s) | 2008-11-27 | PDF 33.1 KB |
| Reason for PC | Cover Letter(s) | 2008-11-27 | PDF 40.8 KB |
| POA | Cover Letter(s) | 2004-10-06 | PDF 74.8 KB |
| Reason for PC2 | Cover Letter(s) | 2004-10-06 | PDF 75.2 KB |
| Purpose of PC2 | Cover Letter(s) | 2003-06-03 | PDF 8.1 KB |
| Amended confidentiality request | Cover Letter(s) | 2002-10-01 | PDF 86 KB |
| Confidentiality Request | Cover Letter(s) | 2002-10-01 | PDF 92.5 KB |
| Letter of Agency | Cover Letter(s) | 2002-10-01 | PDF 69.7 KB |
| MPE | RF Exposure Info | 2004-10-06 | PDF 529.5 KB |
| MPE report on new antenna | RF Exposure Info | 2003-06-03 | PDF 302.5 KB |
| Label | jpeg | 2002-10-01 | PDF 333.7 KB |
| RF Exposure | RF Exposure Info | 2002-10-01 | PDF 759 KB |
| See Operational Description Metadata only | Block Diagram | PDF 41.3 KB | |
| Schematics Metadata only | Schematics | PDF 2.6 MB | |
| Operational Description Metadata only | Operational Description | PDF 410.5 KB | |
| Operational Description amendment regarding output power Metadata only | Operational Description | PDF 33 KB |
Application Information
| Application ID | 4GEgPKOhx7zlKDPins+YTA== |
|---|---|
| Final Action Date | 2008-11-27 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0004945812 |
| Model | M803VTAC |
| Frequency Range | 806-824 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | M-803 Vehicular Tactical Unit (VTAC) |
| Responsible Party | William Pertner, Regulatory Manager, william.pertner@harris.com , 434-455-9295 |
| TCB Email | hotline@atcb.com  |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | This application was originally granted on 05/20/2002. Output is at the antenna terminal of the device and must not exceed that tested for MPE compliance. This transmitter may operate only with antennas as described in this filing. This device must transmit with a source-based time-averaging duty factor not exceeding 50 %. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 43 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled MPE limits and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 4GEgPKOhx7zlKDPins+YTA== | 2008-11-27 | Class II permissive change or modification of presently authorized equipment |
| u1Wuqhr7iazoc+dPUYlSIw== | 2004-10-06 | Class II permissive change or modification of presently authorized equipment |
| OYxolYHa/LDDQumHZb9IfQ== | 2003-06-03 | Class II permissive change or modification of presently authorized equipment |
| /kJqcxwwt3dxaIJQg7c8FA== | 2002-10-01 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application u1Wuqhr7iazoc+dPUYlSIw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/06/2004 Application Dated: 10/06/2004 |
| Harris Corporation |
| 221 Jefferson Ridge Parkway |
| Lynchburg, VA 24501 |
| Attention: Thomas Camper, Jr. , Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BV8M803VTAC |
| Name of Grantee: | Harris Corporation |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | M-803 Vehicular Tactical Unit (VTAC) |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 806.0 - 824.0 | 18.0 | 1.5 PM | 15K8F7D | |
| 90 | 851.0 - 869.0 | 17.0 | 1.5 PM | 15K8F7D | |
| 90 | 806.0 - 824.0 | 18.0 | 1.5 PM | 15K8F7E | |
| 90 | 851.0 - 869.0 | 17.0 | 1.5 PM | 15K8F7E |
| This application was originally granted on 05/20/2002. Output is at the antenna terminal of the device and must not exceed that tested for MPE compliance. This transmitter may operate only with antennas as described in this filing. This device must transmit with a source-based time-averaging duty factor not exceeding 50 %. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 43 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled MPE limits and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. |
EAS Grant - Application u1Wuqhr7iazoc+dPUYlSIw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Harris Corporation 221 Jefferson Ridge Parkway Lynchburg, VA 24501 United States |
Date of Grant: 10/06/2004 Application Dated: 10/06/2004 |
| Attention: Thomas Camper, Jr. , Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BV8M803VTAC |
| Name of Grantee: | Harris Corporation |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | M-803 Vehicular Tactical Unit (VTAC) |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 806.0 - 824.0 | 18.0 | 1.5 PM | 15K8F7D | |
| 90 | 851.0 - 869.0 | 17.0 | 1.5 PM | 15K8F7D | |
| 90 | 806.0 - 824.0 | 18.0 | 1.5 PM | 15K8F7E | |
| 90 | 851.0 - 869.0 | 17.0 | 1.5 PM | 15K8F7E |
| This application was originally granted on 05/20/2002. Output is at the antenna terminal of the device and must not exceed that tested for MPE compliance. This transmitter may operate only with antennas as described in this filing. This device must transmit with a source-based time-averaging duty factor not exceeding 50 %. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 43 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled MPE limits and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/03/2003 Application Dated: 06/03/2003 |
| Harris Corporation |
| 221 Jefferson Ridge Parkway |
| Lynchburg, VA 24501 |
| Attention: Thomas Camper, Jr. , Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BV8M803VTAC |
| Name of Grantee: | Harris Corporation |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | M-803 Vehicular Tactical Unit (VTAC) |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 806.0 - 824.0 | 18.0 | 1.5 PM | 15K8F7D | |
| 90 | 851.0 - 869.0 | 17.0 | 1.5 PM | 15K8F7D | |
| 90 | 806.0 - 824.0 | 18.0 | 1.5 PM | 15K8F7E | |
| 90 | 851.0 - 869.0 | 17.0 | 1.5 PM | 15K8F7E |
| This application was originally granted on 05/20/2002. Output is at the antenna terminal of the device and must not exceed that tested for MPE compliance. This transmitter may operate only with antennas as described in this filing. This device must transmit with a source-based time-averaging duty factor not exceeding 50 %. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 43 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled MPE limits and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. |
EAS Grant - Application OYxolYHa/LDDQumHZb9IfQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Harris Corporation 221 Jefferson Ridge Parkway Lynchburg, VA 24501 United States |
Date of Grant: 06/03/2003 Application Dated: 06/03/2003 |
| Attention: Thomas Camper, Jr. , Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BV8M803VTAC |
| Name of Grantee: | Harris Corporation |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | M-803 Vehicular Tactical Unit (VTAC) |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 806.0 - 824.0 | 18.0 | 1.5 PM | 15K8F7D | |
| 90 | 851.0 - 869.0 | 17.0 | 1.5 PM | 15K8F7D | |
| 90 | 806.0 - 824.0 | 18.0 | 1.5 PM | 15K8F7E | |
| 90 | 851.0 - 869.0 | 17.0 | 1.5 PM | 15K8F7E |
| This application was originally granted on 05/20/2002. Output is at the antenna terminal of the device and must not exceed that tested for MPE compliance. This transmitter may operate only with antennas as described in this filing. This device must transmit with a source-based time-averaging duty factor not exceeding 50 %. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 43 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled MPE limits and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 11/27/2008 Application Dated: 11/26/2008 |
| Harris Corporation |
| 221 Jefferson Ridge Parkway |
| Lynchburg, VA 24501 |
| Attention: William Pertner , Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BV8M803VTAC |
| Name of Grantee: | Harris Corporation |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | M-803 Vehicular Tactical Unit (VTAC) |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 806.0 - 824.0 | 18.0 | 1.5 PM | 15K8F7D | |
| 90 | 851.0 - 869.0 | 17.0 | 1.5 PM | 15K8F7D | |
| 90 | 806.0 - 824.0 | 18.0 | 1.5 PM | 15K8F7E | |
| 90 | 851.0 - 869.0 | 17.0 | 1.5 PM | 15K8F7E | |
| 90 | 806.0 - 824.0 | 18.0 | 1.5 PM | 12K8F9W |
| This application was originally granted on 05/20/2002. Output is at the antenna terminal of the device and must not exceed that tested for MPE compliance. This transmitter may operate only with antennas as described in this filing. This device must transmit with a source-based time-averaging duty factor not exceeding 50 %. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 43 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled MPE limits and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. |
EAS Grant - Application 4GEgPKOhx7zlKDPins+YTA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Harris Corporation 221 Jefferson Ridge Parkway Lynchburg, VA 24501 United States |
Date of Grant: 11/27/2008 Application Dated: 11/26/2008 |
| Attention: William Pertner , Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BV8M803VTAC |
| Name of Grantee: | Harris Corporation |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | M-803 Vehicular Tactical Unit (VTAC) |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 806.0 - 824.0 | 18.0 | 1.5 PM | 15K8F7D | |
| 90 | 851.0 - 869.0 | 17.0 | 1.5 PM | 15K8F7D | |
| 90 | 806.0 - 824.0 | 18.0 | 1.5 PM | 15K8F7E | |
| 90 | 851.0 - 869.0 | 17.0 | 1.5 PM | 15K8F7E | |
| 90 | 806.0 - 824.0 | 18.0 | 1.5 PM | 12K8F9W |
| This application was originally granted on 05/20/2002. Output is at the antenna terminal of the device and must not exceed that tested for MPE compliance. This transmitter may operate only with antennas as described in this filing. This device must transmit with a source-based time-averaging duty factor not exceeding 50 %. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 43 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled MPE limits and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Harris Corporation 221 Jefferson Ridge Parkway Lynchburg, VA 24501 United States |
Date of Grant: 10/01/2002 Application Dated: 02/22/2002 |
| Attention: Thomas Camper, Jr. , Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BV8M803VTAC |
| Name of Grantee: | Harris Corporation |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | M-803 Vehicular Tactical Unit (VTAC) |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 806.0 - 824.0 | 18.0 | 1.5 PM | 15K8F7D | |
| 90 | 851.0 - 869.0 | 17.0 | 1.5 PM | 15K8F7D | |
| 90 | 806.0 - 824.0 | 18.0 | 1.5 PM | 15K8F7E | |
| 90 | 851.0 - 869.0 | 17.0 | 1.5 PM | 15K8F7E |
| This application was originally granted on 05/20/2002. |
| Output is at the antenna terminal of the device and must not exceed that tested for MPE compliance. This transmitter may operate only with antennas as described in this filing for Push-to-Talk mode. This device must transmit with a source-based time-averaging duty factor not exceeding 50 %. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 43 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled MPE limits and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information.
|
| Mail To: |