FCC ID BV8MTT-A025

ISM Radio

by Harris Corporation

Grantee Code: BV8   Product Code: MTTA025
Latest application date: 2004-07-27

FCC ID Device Details

FCC IDBV8MTT-A025
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeBV8
Product CodeMTTA025
Applicant BusinessHarris Corporation 🇺🇸
Related Domains harris.com
Equipment ClassISM Radio
Test FirmRhein Tech Laboratories, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2004-07-27
2412-2462 MHzOriginal Equipment2004-01-17
2412-2467 MHzOriginal Equipment2002-12-23

Exhibits

DocumentTypeAvailableFile
Manual revisedUsers Manual2004-07-27PDF 3.7 MB
Installation Manual StatementCover Letter(s)2004-01-17PDF 64.3 KB
Users ManualUsers Manual2004-01-17PDF 3.5 MB
Correspondence 23005 Question 4 Metadata onlyUsers ManualPDF 10.9 KB
User Manual Revisions Metadata onlyUsers ManualPDF 13.7 KB
Users Manual Metadata onlyUsers ManualPDF 737.3 KB
Internal PhotosInternal Photos2004-01-17PDF 295.8 KB
Internal Photos Metadata onlyInternal PhotosPDF 424.5 KB
External photos 1External Photos2004-07-27PDF 1.8 MB
External photos 2External Photos2004-07-27PDF 2.8 MB
External PhotosExternal Photos2004-01-17PDF 265.9 KB
External Photos Metadata onlyExternal PhotosPDF 427.3 KB
FCC ID Label InformationID Label/Location Info2004-01-17PDF 75.3 KB
Label and location Metadata onlyID Label/Location InfoPDF 98 KB
Revised FCC Label Metadata onlyID Label/Location InfoPDF 98.9 KB
Block DiagramBlock Diagram2004-01-17PDF 1.5 MB
CH1 Processing Gain Pass2 Metadata onlyOperational DescriptionPDF 24.8 KB
CH6 Processing Gain Metadata onlyOperational DescriptionPDF 31.6 KB
CH6 Processing Gain Pass2 Metadata onlyOperational DescriptionPDF 23.8 KB
Correspondence 23005 Question 2 Metadata onlyOperational DescriptionPDF 31.3 KB
Correspondence 23005 Question 3 Metadata onlyOperational DescriptionPDF 74.8 KB
Test set up photosTest Setup Photos2004-07-27PDF 3.8 MB
Test Setup PhotosTest Setup Photos2004-01-17PDF 327.6 KB
Test reportTest Report2004-07-27PDF 524.2 KB
Test Report Part ITest Report2004-01-17PDF 1.7 MB
Test Report Part IITest Report2004-01-17PDF 2.5 MB
Test Report Part IIITest Report2004-01-17PDF 1.9 MB
Test Report and Setup Photos Metadata onlyTest ReportPDF 1.8 MB
ISM Power Antenna RationaleAttestation Statements2004-01-17PDF 56.1 KB
ATCB commentsCover Letter(s)2004-07-27PDF 20.1 KB
Antenna rationaleCover Letter(s)2004-07-27PDF 58.2 KB
Antenna spcesCover Letter(s)2004-07-27PDF 310.5 KB
POACover Letter(s)2004-07-27PDF 75.2 KB
Reason for PC2Cover Letter(s)2004-07-27PDF 76 KB
Response to ATCBCover Letter(s)2004-07-27PDF 102.7 KB
Confidentiality Request LetterCover Letter(s)2004-01-17PDF 59.1 KB
Confidentiality LetterCover Letter(s)PDF 394.4 KB
MPERF Exposure Info2004-07-27PDF 96.8 KB
Correspondence 23005 Question 1 Metadata onlyRF Exposure InfoPDF 8.8 KB
Block Diagrams Metadata onlyBlock DiagramPDF 517.8 KB
Schematics Metadata onlySchematicsPDF 2.8 MB
Schematics Metadata onlySchematicsPDF 1.1 MB
Operational Description Metadata onlyOperational DescriptionPDF 56.4 KB

Application Information

Application IDJcy19pfeRfxjASg+r9M5eQ==
Final Action Date2004-07-27
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0004945812
ModelMTT-A025
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionISM Radio
Responsible PartyThomas Camper, Jr., Regulatory Manager, tcamper@harris.com , 434-455-9367
AgentDesmond Desmond Desmond, Rhein Tech Labs, ATCBINFO@rheintech.com , 703-689-0368
Technical ContactRick McMurray, Rhein Tech Labs, ATCBINFO@rheintech.com , 703-689-0368
Test FirmGalina Yushina, Rhein Tech Laboratories, Inc., gyushina@rheintech.com , 7036890368
TCB Emailhotline@americantcb.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput is at the antenna terminal of the device and must not exceed that tested for MPE compliance. The antenna(s) used with this transmitter must be professionally installed. This transmitter may operate only with antennas as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 32 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
Jcy19pfeRfxjASg+r9M5eQ==2004-07-27Class II permissive change or modification of presently authorized equipment
Y8ES4GUvLif8XQy3bhVBsw==2004-01-17Original Equipment
ZU4TDuYyLy9o6nFZ4CESyQ==2002-12-23Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.2615C
2412-2462 MHz0.2615CCE
2412-2467 MHz0.33115C
2412-2462 MHz0.04215C
2412-2467 MHz0.25115C

Grants

TCB Grant - Application ZU4TDuYyLy9o6nFZ4CESyQ==

This application does not exist.

EAS Grant - Application ZU4TDuYyLy9o6nFZ4CESyQ==

This application currently is not in final status.

TCB Grant - Application Y8ES4GUvLif8XQy3bhVBsw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 01/17/2004

Application Dated: 01/17/2004
Harris Corporation
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
 
Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BV8MTT-A025
Name of Grantee:  Harris Corporation
Equipment Class: Digital Transmission System
Notes: ISM Radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.26  
15C 2412.0  -  2462.0 0.042  

Output is at the antenna terminal of the device and must not exceed that tested for MPE compliance. This transmitter may operate only with antennas as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 400 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device must be professionally installed.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application Y8ES4GUvLif8XQy3bhVBsw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Harris Corporation
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
United States
  Date of Grant: 01/17/2004

Application Dated: 01/17/2004
 
Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BV8MTT-A025
Name of Grantee:  Harris Corporation
Equipment Class: Digital Transmission System
Notes: ISM Radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.26  
15C 2412.0  -  2462.0 0.042  

Output is at the antenna terminal of the device and must not exceed that tested for MPE compliance. This transmitter may operate only with antennas as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 400 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device must be professionally installed.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application Jcy19pfeRfxjASg+r9M5eQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 07/27/2004

Application Dated: 07/27/2004
Harris Corporation
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
 
Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BV8MTT-A025
Name of Grantee:  Harris Corporation
Equipment Class: Digital Transmission System
Notes: ISM Radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.26  
15C 2412.0  -  2462.0 0.042  

Output is at the antenna terminal of the device and must not exceed that tested for MPE compliance. The antenna(s) used with this transmitter must be professionally installed. This transmitter may operate only with antennas as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 32 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application Jcy19pfeRfxjASg+r9M5eQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Harris Corporation
221 Jefferson Ridge Parkway
Lynchburg, VA 24501
United States
  Date of Grant: 07/27/2004

Application Dated: 07/27/2004
 
Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BV8MTT-A025
Name of Grantee:  Harris Corporation
Equipment Class: Digital Transmission System
Notes: ISM Radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.26  
15C 2412.0  -  2462.0 0.042  

Output is at the antenna terminal of the device and must not exceed that tested for MPE compliance. The antenna(s) used with this transmitter must be professionally installed. This transmitter may operate only with antennas as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 32 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: