FCC ID BV8P801T

This application does not exist.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Harris Corporation 221 Jefferson Ridge Parkway Lynchburg, VA 24501 United States

Date of Grant: 02/09/2001 Application Dated: 04/25/2000

Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	BV8P-801T
Name of Grantee:	Harris Corporation
Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	P-801T VOICE TERMINAL RADIO
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	851.0  -  869.0	1.0	0.1  PM	16K0F1D
	90	806.0  -  824.0	3.0	0.1  PM	16K0F1D
	90	851.0  -  869.0	1.0	0.1  PM	12K0F1E
	90	806.0  -  824.0	3.0	0.1  PM	12K0F1E
	90	851.0  -  869.0	1.0	0.1  PM	12K0F3E
	90	806.0  -  824.0	3.0	0.1  PM	12K0F3E

Power output listed is at the antenna terminal of the device. This transmitter may operate with a quarter-wave or a half-wave antenna, as tested for this filing in Push-to-Talk and body-worn operating configurations, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. Device typically operates at 50% duty factor. Body-worn SAR compliance is limited to the specific belt-clip and speaker/microphone configurations tested for this filing. This device must be restricted for work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values at 100% duty factor are - Head: 3.42 W/kg; Body-worn: 7.02 W/kg.

This application was originally granted on 01/05/2001.

TCB Grant - Application OfAUuhs2Lv3+az+mFfIHuQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 11/10/2004 Application Dated: 11/10/2004

Harris Corporation

221 Jefferson Ridge Parkway

Lynchburg, VA 24501

Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	BV8P801T
Name of Grantee:	Harris Corporation
Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	Portable Radio Model P801T

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	806.0  -  821.0	3.0	1.5  PM	12K3F9W
	90	821.0  -  824.0	3.0	1.5  PM	12K3F9W
	90	806.0  -  824.0	3.0	1.5  PM	13K5F1D
	90	806.0  -  824.0	3.0	1.5  PM	13K5F1E
	90	806.0  -  824.0	3.0	1.5  PM	12K2F1D
	90	806.0  -  824.0	3.0	1.5  PM	12K2F1E
	90	851.0  -  869.0	3.0	1.5  PM	12K2F1D
	90	851.0  -  869.0	3.0	1.5  PM	12K2F1E
	90	851.0  -  869.0	3.0	1.5  PM	12K2F3E
	90	806.0  -  824.0	3.0	1.5  PM	12K2F3E

Power output listed is at the antenna terminal of the device. This transmitter may operate with a quarter-wave or a half-wave antenna, as shown in this filing in Push-to-Talk and body-worn operating configurations, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. Device typically operates at 50% duty factor. Body-worn SAR compliance is limited to the specific belt-clip and speaker/microphone configurations as shown in this filing. This device must be restricted for work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values at 100% duty factor are - Head: 3.42 W/kg; Body-worn: 7.02 W/kg. This application was originally granted on 04/11/2002.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Harris Corporation 221 Jefferson Ridge Parkway Lynchburg, VA 24501 United States

Date of Grant: 11/10/2004 Application Dated: 11/10/2004

Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	BV8P801T
Name of Grantee:	Harris Corporation
Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	Portable Radio Model P801T
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	806.0  -  821.0	3.0	1.5  PM	12K3F9W
	90	821.0  -  824.0	3.0	1.5  PM	12K3F9W
	90	806.0  -  824.0	3.0	1.5  PM	13K5F1D
	90	806.0  -  824.0	3.0	1.5  PM	13K5F1E
	90	806.0  -  824.0	3.0	1.5  PM	12K2F1D
	90	806.0  -  824.0	3.0	1.5  PM	12K2F1E
	90	851.0  -  869.0	3.0	1.5  PM	12K2F1D
	90	851.0  -  869.0	3.0	1.5  PM	12K2F1E
	90	851.0  -  869.0	3.0	1.5  PM	12K2F3E
	90	806.0  -  824.0	3.0	1.5  PM	12K2F3E

Power output listed is at the antenna terminal of the device. This transmitter may operate with a quarter-wave or a half-wave antenna, as shown in this filing in Push-to-Talk and body-worn operating configurations, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. Device typically operates at 50% duty factor. Body-worn SAR compliance is limited to the specific belt-clip and speaker/microphone configurations as shown in this filing. This device must be restricted for work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values at 100% duty factor are - Head: 3.42 W/kg; Body-worn: 7.02 W/kg. This application was originally granted on 04/11/2002.

TCB Grant - Application C8QNbdwGfGR+397EJeCpcQ==

EAS Grant - Application C8QNbdwGfGR+397EJeCpcQ==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Harris Corporation 221 Jefferson Ridge Parkway Lynchburg, VA 24501 United States

Date of Grant: 04/05/2005 Application Dated: 01/22/2002

Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	BV8P801T
Name of Grantee:	Harris Corporation
Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	P801T VOICE TERMINAL RADIO
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	806.0  -  821.0	3.0	2.5  PM	13K5F1D
	90	806.0  -  821.0	3.0	2.5  PM	13K5F1E
	90	821.0  -  824.0	3.0	1.5  PM	13K5F1D
	90	821.0  -  824.0	3.0	1.5  PM	13K5F1E

Power output listed is at the antenna terminal of the device. This transmitter may operate with a quarter-wave or a half-wave antenna, as shown in this filing in Push-to-Talk and body-worn operating configurations, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. Device typically operates at 50% duty factor. Body-worn SAR compliance is limited to the specific belt-clip and speaker/microphone configurations as shown in this filing. This device must be restricted for work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values at 100% duty factor are - Head: 3.42 W/kg; Body-worn: 7.02 W/kg.

This application was originally granted on 04/11/2002.

TCB Grant - Application bzb4HzJK8CAYQNJjNwx1lw==

EAS Grant - Application bzb4HzJK8CAYQNJjNwx1lw==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Harris Corporation 221 Jefferson Ridge Parkway Lynchburg, VA 24501 United States

Date of Grant: 11/20/2002 Application Dated: 08/08/2002

Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	BV8P801T
Name of Grantee:	Harris Corporation
Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	P801T Voice Terminal Radio
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	806.0  -  824.0	3.0	2.5  PM	12K2F3E
	90	851.0  -  869.0	3.0	2.5  PM	12K2F3E

Power output listed is at the antenna terminal of the device. This transmitter may operate with a quarter-wave or a half-wave antenna, as shown in this filing in Push-to-Talk and body-worn operating configurations, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. Device typically operates at 50% duty factor. Body-worn SAR compliance is limited to the specific belt-clip and speaker/microphone configurations as shown in this filing. This device must be restricted for work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values at 100% duty factor are - Head: 3.42 W/kg; Body-worn: 7.02 W/kg.

TCB Grant - Application Bd/kTwsFKzC1PUIb0VEWAQ==

EAS Grant - Application Bd/kTwsFKzC1PUIb0VEWAQ==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Harris Corporation 221 Jefferson Ridge Parkway Lynchburg, VA 24501 United States

Date of Grant: 03/29/2004 Application Dated: 11/13/2003

Attention: Thomas Camper, Jr. , Regulatory Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	BV8P801T
Name of Grantee:	Harris Corporation
Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	Portable Radio Model P801T
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90	806.0  -  824.0	3.0	2.5  PM	12K2F1D
	90	806.0  -  824.0	3.0	2.5  PM	12K2F1E
	90	851.0  -  869.0	3.0	2.5  PM	12K2F1D
	90	851.0  -  869.0	3.0	2.5  PM	12K2F1E

Power output listed is at the antenna terminal of the device. This transmitter may operate with a quarter-wave or a half-wave antenna, as shown in this filing in Push-to-Talk and body-worn operating configurations, and only satisfies SAR limit for Occupational/Controlled RF Exposure Environment. Device typically operates at 50% duty factor. Body-worn SAR compliance is limited to the specific belt-clip and speaker/microphone configurations as shown in this filing. This device must be restricted for work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements and users must be provided with the training information. The highest reported SAR values at 100% duty factor are - Head: 3.42 W/kg; Body-worn: 7.02 W/kg.

Mail To:

Daryl Popowitch, Engineering Project Manager

M/A-Com, Inc.

221 Jefferson Ridge Parkway

Lynchburg, VA 24501