FCC ID BVCIDX8000NA
Part 15 Spread Spectrum Transmitter, RFID Reader
by Tyco Safety Products/Sensormatic
Grantee Code: BVC Product Code: IDX8000NA
Latest application date: 2014-08-20
FCC ID Device Details
| FCC ID | BVCIDX8000NA |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | BVC |
| Product Code | IDX8000NA |
| Applicant Business | Tyco Safety Products/Sensormatic 🇺🇸 |
| Related Domains |  tycoint.com |
| Equipment Class | Part 15 Spread Spectrum Transmitter, RFID Reader |
| Test Firm | Sensormatic |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.74-927.25 MHz | Class II permissive change or modification of presently authorized equipment | 2014-08-20 |
| 902.74-927.25 MHz | Class II permissive change or modification of presently authorized equipment | 2013-10-17 |
| 902.74-927.25 MHz | Original Equipment | 2012-06-07 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2012-06-07 | PDF 249 KB |
| Internal Photos | Internal Photos | 2014-08-20 | PDF 803.1 KB |
| Internal Photos | Internal Photos | 2013-10-17 | PDF 711.7 KB |
| Photo Locate Filter | Internal Photos | 2013-10-17 | PDF 278.8 KB |
| Internal Photos | Internal Photos | 2012-06-07 | PDF 618.8 KB |
| External Photos | External Photos | 2014-08-20 | PDF 183.1 KB |
| Label Location | ID Label/Location Info | 2012-06-07 | PDF 53.3 KB |
| Label Sample | ID Label/Location Info | 2012-06-07 | PDF 44.9 KB |
| Test Setup Photos | Test Setup Photos | 2012-06-07 | PDF 1.1 MB |
| Test Report | Test Report | 2014-08-20 | PDF 943.8 KB |
| Test Report | Test Report | 2013-10-17 | PDF 855.4 KB |
| Test Report | Test Report | 2012-06-07 | PDF 966.5 KB |
| DoC Attestation Letter | Cover Letter(s) | 2013-10-17 | PDF 42.8 KB |
| C2PC Letter | Cover Letter(s) | 2014-08-20 | PDF 105.1 KB |
| Confidentiality Letter | Cover Letter(s) | 2014-08-20 | PDF 106.8 KB |
| C2PC Cover Letter | Cover Letter(s) | 2013-10-17 | PDF 74.9 KB |
| Request for Confidentiality | Cover Letter(s) | 2013-10-17 | PDF 72.9 KB |
| Confidential Letter | Cover Letter(s) | 2012-06-07 | PDF 72.9 KB |
| Cover Letter | Cover Letter(s) | 2012-06-07 | PDF 74.5 KB |
| DOC Letter | Cover Letter(s) | 2012-06-07 | PDF 42.8 KB |
| RF Exposure | RF Exposure Info | 2012-06-07 | PDF 7.5 KB |
| Schematics Metadata only | Schematics | PDF 638.7 KB | |
| Schematics change Metadata only | Schematics | PDF 134.2 KB |
Application Information
| Application ID | rRWfB1MaA7pr4fLpAqGhnQ== |
|---|---|
| Final Action Date | 2014-08-20 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0005052626 |
| Model | IDX8000NA |
| Frequency Range | 902.74-927.25 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Part 15 Spread Spectrum Transmitter, RFID Reader |
| Responsible Party | William D. Owsley, Principal Compliance Engineer, bowsley@tycoint.com , 561-912-6462 |
| Test Firm | William Owsley, Sensormatic, bowsley@tycoint.com , 5619126462 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Modular Approval: Power listed is conducted. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change: This Class II Change adds an alternate antenna. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| rRWfB1MaA7pr4fLpAqGhnQ== | 2014-08-20 | Class II permissive change or modification of presently authorized equipment |
| cRBVbr9zFUB09uPUHutfjA== | 2013-10-17 | Class II permissive change or modification of presently authorized equipment |
| pICJ8AE875YNDcM8cltveA== | 2012-06-07 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.74-927.25 MHz | 1.0000000 | 15C |
Grants
TCB Grant - Application rRWfB1MaA7pr4fLpAqGhnQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 08/20/2014 Application Dated: 08/20/2014 |
| Tyco Safety Products/Sensormatic |
| 6600 Congress Ave |
| Boca Raton, FL 33487 |
| Attention: William Owsley , Principal Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BVCIDX8000NA |
| Name of Grantee: | Tyco Safety Products/Sensormatic |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Part 15 Spread Spectrum Transmitter, RFID Reader |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.74 - 927.25 | 1.0 |
| Limited Modular Approval: Power listed is conducted. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change: This Class II Change adds an alternate antenna. |
EAS Grant - Application rRWfB1MaA7pr4fLpAqGhnQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tyco Safety Products/Sensormatic 6600 Congress Ave Boca Raton, FL 33487 United States |
Date of Grant: 08/20/2014 Application Dated: 08/20/2014 |
| Attention: William Owsley , Principal Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BVCIDX8000NA |
| Name of Grantee: | Tyco Safety Products/Sensormatic |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Part 15 Spread Spectrum Transmitter, RFID Reader |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.74 - 927.25 | 1.0 |
| Limited Modular Approval: Power listed is conducted. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change: This Class II Change adds an alternate antenna. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 06/07/2012 Application Dated: 06/07/2012 |
| Tyco Safety Products/Sensormatic |
| 6600 Congress Ave |
| Boca Raton, FL 33487 |
| Attention: William Owsley , Principal Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BVCIDX8000NA |
| Name of Grantee: | Tyco Safety Products/Sensormatic |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | PART 15.247 SPREAD SPECTRUM TRANSMITTER, RFID READER |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.74 - 927.25 | 1.0 |
| Limited Modular Approval: Power listed is conducted. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application pICJ8AE875YNDcM8cltveA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tyco Safety Products/Sensormatic 6600 Congress Ave Boca Raton, FL 33487 United States |
Date of Grant: 06/07/2012 Application Dated: 06/07/2012 |
| Attention: William Owsley , Principal Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BVCIDX8000NA |
| Name of Grantee: | Tyco Safety Products/Sensormatic |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | PART 15.247 SPREAD SPECTRUM TRANSMITTER, RFID READER |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.74 - 927.25 | 1.0 |
| Limited Modular Approval: Power listed is conducted. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 10/17/2013 Application Dated: 10/17/2013 |
| Tyco Safety Products/Sensormatic |
| 6600 Congress Ave |
| Boca Raton, FL 33487 |
| Attention: William Owsley , Principal Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BVCIDX8000NA |
| Name of Grantee: | Tyco Safety Products/Sensormatic |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.74 - 927.25 | 1.0 |
| Limited Modular Approval: Power listed is conducted. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application cRBVbr9zFUB09uPUHutfjA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tyco Safety Products/Sensormatic 6600 Congress Ave Boca Raton, FL 33487 United States |
Date of Grant: 10/17/2013 Application Dated: 10/17/2013 |
| Attention: William Owsley , Principal Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BVCIDX8000NA |
| Name of Grantee: | Tyco Safety Products/Sensormatic |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.74 - 927.25 | 1.0 |
| Limited Modular Approval: Power listed is conducted. The antenna installation and operating configurations of this transmitter, including any applicable antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |