1. FCC ID
  2. BYM
  3. BYMBASE6000

FCC ID BYMBASE6000

EC20 - Extended Coverage Antenna Kit

by HM Electronics Inc

Grantee Code: BYM   Product Code: BASE6000
Latest application date: 2009-04-29

FCC ID Device Details

FCC IDBYMBASE6000
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeBYM
Product CodeBASE6000
Applicant BusinessHM Electronics Inc 🇺🇸
Related Domains hme.com
Equipment ClassEC20 - Extended Coverage Antenna Kit
Test FirmNemko USA, Inc. - San Diego EMC Division

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2400-2483.5 MHzClass II permissive change or modification of presently authorized equipment2009-04-29
2400-2483.5 MHzClass II permissive change or modification of presently authorized equipment2004-06-30
2400-2483.5 MHzOriginal Equipment2003-09-09

Exhibits

DocumentTypeAvailableFile
antennaUsers Manual2009-04-29PDF 445.2 KB
installation guideUsers Manual2009-04-29PDF 348.3 KB
ManualUsers Manual2004-06-30PDF 1.4 MB
User ManualUsers Manual2003-09-09PDF 2.3 MB
Internal Photo 1Internal Photos2004-06-30PDF 269.6 KB
Internal Photo 2Internal Photos2004-06-30PDF 107.2 KB
Internal Photo 3Internal Photos2004-06-30PDF 217.4 KB
Internal Photo 4Internal Photos2004-06-30PDF 103.3 KB
Internal Photo 5Internal Photos2004-06-30PDF 1.4 MB
Internal Photo 6Internal Photos2004-06-30PDF 1.1 MB
Internal Photo 7Internal Photos2004-06-30PDF 63.7 KB
Internal Photo 8Internal Photos2004-06-30PDF 344 KB
Internal Photo 9Internal Photos2004-06-30PDF 55.7 KB
PhotosInternal Photos2003-09-09PDF 976.4 KB
External Photo 1External Photos2004-06-30PDF 1.1 MB
External Photo 2External Photos2004-06-30PDF 2.2 MB
External Photo 3External Photos2004-06-30PDF 2.3 MB
External Photo 4External Photos2004-06-30PDF 1.1 MB
External Photo 5External Photos2004-06-30PDF 231.3 KB
External Photo 6External Photos2004-06-30PDF 3 MB
PhotosExternal Photos2003-09-09PDF 433.2 KB
LabelSmplID Label/Location Info2003-09-09PDF 20.8 KB
remote antenna descriptionOperational Description2009-04-29PDF 35.7 KB
test setup photosTest Setup Photos2009-04-29PDF 150.4 KB
Test Setup PhotosTest Setup Photos2004-06-30PDF 415.2 KB
PhotosTest Setup Photos2003-09-09PDF 390.4 KB
test reportTest Report2009-04-29PDF 197.9 KB
Test ReportTest Report2004-06-30PDF 1 MB
Test ReportTest Report2003-09-09PDF 2.9 MB
agent letterCover Letter(s)2009-04-29PDF 40.7 KB
changes letterCover Letter(s)2009-04-29PDF 38.4 KB
professional install letterCover Letter(s)2009-04-29PDF 41.9 KB
Confidentiality RequestCover Letter(s)2004-06-30PDF 64.9 KB
Cover Letter BS200 Model DifferenceCover Letter(s)2004-06-30PDF 501.4 KB
Response to TCB FindingsCover Letter(s)2004-06-30PDF 60.1 KB
Cover LetterCover Letter(s)2003-09-09PDF 101.6 KB
MPE calculationRF Exposure Info2009-04-29PDF 48.9 KB
PhotosParts List/Tune Up Info2003-09-09PDF 390.4 KB
RFExpRF Exposure Info2003-09-09PDF 206 KB
Block Diagram Metadata onlyBlock DiagramPDF 333.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 39.5 KB
Schematics Metadata onlySchematicsPDF 940.6 KB
Schematics Metadata onlySchematicsPDF 977 KB
OpDesc Metadata onlyOperational DescriptionPDF 161.4 KB
Operational Description Metadata onlyOperational DescriptionPDF 644.1 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 32.1 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 400.8 KB

Application Information

Application IDfgh1NOdWmwa3FtyPVskuiQ==
Final Action Date2009-04-29
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0005870704
ModelBASE6000
Frequency Range2400-2483.5 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionEC20 - Extended Coverage Antenna Kit
Responsible PartyKarl Knoblock, Electrical Engineering Manager, kknoblock@hme.com , 858-535-6152
AgentAlan Alan Alan, Nemko USA, Inc., alan.laudani@nemko.com , 858-755-5525
Technical ContactVictor Lerner, HM Electronics, Inc., vlerner@hme.com , (858)535-6046
Non-Technical ContactKarl Knoblock, HM Electronics, Inc., kknoblock@hme.com , (858) 535-6112
Test FirmJim Morris, Nemko USA, Inc. - San Diego EMC Division, Jim.Morris@nemko.com , 760-444-3401
TCB Emailstuart.beck@nemko.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II permissive change to add antenna. This equipment must be professionally installed. Power listed is EIRP. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
fgh1NOdWmwa3FtyPVskuiQ==2009-04-29Class II permissive change or modification of presently authorized equipment
liSnVdEEbYLLhpdHeeUEjA==2004-06-30Class II permissive change or modification of presently authorized equipment
Z3F2Jlohdn5wPqyAZv95qg==2003-09-09Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
2400-2483.5 MHz0.087000015CCE
2400-2483.5 MHz0.087000013.0000000000ppm1M72Q7W15C68, CE
2400-2483.5 MHz0.087000015C

Grants

TCB Grant - Application Z3F2Jlohdn5wPqyAZv95qg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany 		Date of Grant: 09/09/2003

Application Dated: 09/09/2003
HM Electronics Inc
2848 Whiptail Loop
Carlsbad, CA 92010
 
Attention: Douglas Sieh , Electrical Compliance Supervisor

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BYMBASE6000
Name of Grantee:  HM Electronics Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: BASE STATION 6000
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
68 CE 15C 2400.0  -  2483.5 0.087 13.0  PM 1M72Q7W

The conducted output power is 74mW and ratiated output power is 87mW. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

68: This grant does not pertain to equipment approval requirements under Part 68.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application Z3F2Jlohdn5wPqyAZv95qg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

HM Electronics Inc
2848 Whiptail Loop
Carlsbad, CA 92010
United States 		  Date of Grant: 09/09/2003

Application Dated: 09/09/2003
 
Attention: Douglas Sieh , Electrical Compliance Supervisor

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BYMBASE6000
Name of Grantee:  HM Electronics Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: BASE STATION 6000
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
68 CE 15C 2400.0  -  2483.5 0.087 13.0  PM 1M72Q7W

The conducted output power is 74mW and ratiated output power is 87mW. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


68: This grant does not pertain to equipment approval requirements under Part 68.
CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application liSnVdEEbYLLhpdHeeUEjA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
 Date of Grant: 06/30/2004

Application Dated: 06/30/2004
HM Electronics Inc
2848 Whiptail Loop
Carlsbad, CA 92010
 
Attention: Douglas Sieh , Electrical Compliance Supervisor

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BYMBASE6000
Name of Grantee:  HM Electronics Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: BS200
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CE 15C 2400.0  -  2483.5 0.087  

Class II Permissive Change filing to add new model.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application liSnVdEEbYLLhpdHeeUEjA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

HM Electronics Inc
2848 Whiptail Loop
Carlsbad, CA 92010
United States 		  Date of Grant: 06/30/2004

Application Dated: 06/30/2004
 
Attention: Douglas Sieh , Electrical Compliance Supervisor

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BYMBASE6000
Name of Grantee:  HM Electronics Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: BS200
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CE 15C 2400.0  -  2483.5 0.087  

Class II Permissive Change filing to add new model.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

TCB Grant - Application fgh1NOdWmwa3FtyPVskuiQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko Canada Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 04/29/2009

Application Dated: 04/28/2009
HM Electronics Inc
14110 Stowe Drive
Poway, CA 92064
 
Attention: Karl Knoblock , Electrical Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BYMBASE6000
Name of Grantee:  HM Electronics Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: EC20 - Extended Coverage Antenna Kit
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2400.0  -  2483.5 0.087  

Class II permissive change to add antenna. This equipment must be professionally installed. Power listed is EIRP. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application fgh1NOdWmwa3FtyPVskuiQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

HM Electronics Inc
14110 Stowe Drive
Poway, CA 92064
United States 		  Date of Grant: 04/29/2009

Application Dated: 04/28/2009
 
Attention: Karl Knoblock , Electrical Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BYMBASE6000
Name of Grantee:  HM Electronics Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: EC20 - Extended Coverage Antenna Kit
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2400.0  -  2483.5 0.087  

Class II permissive change to add antenna. This equipment must be professionally installed. Power listed is EIRP. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: