FCC ID BYMXCVR6K1
Rf MODULE
by HM Electronics Inc
Grantee Code: BYM Product Code: XCVR6K1
Latest application date: 2015-04-24
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2401.92-2481.408 MHz | Class II permissive change or modification of presently authorized equipment | 2015-04-24 |
| 2401.92-2481.408 MHz | Original Equipment | 2009-07-31 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| antenna data | Users Manual | 2009-07-31 | PDF 2.5 MB |
| antenna data II | Users Manual | 2009-07-31 | PDF 458.9 KB |
| installation manual | Users Manual | 2009-07-31 | PDF 969.6 KB |
| Internal Photos | Internal Photos | 2015-04-24 | PDF 1.5 MB |
| internal photos | Internal Photos | 2009-07-31 | PDF 440 KB |
| External Photos | External Photos | 2015-04-24 | PDF 1.5 MB |
| external photos | External Photos | 2009-07-31 | PDF 440 KB |
| Label and Label location | ID Label/Location Info | 2015-04-24 | PDF 531.4 KB |
| label and location | ID Label/Location Info | 2009-07-31 | PDF 943.2 KB |
| Schematics | Schematics | 2015-04-24 | PDF 441 KB |
| Test Setup Photos | Test Setup Photos | 2015-04-24 | PDF 482.5 KB |
| test setup photos | Test Setup Photos | 2009-07-31 | PDF 2.6 MB |
| Test Report | Test Report | 2015-04-24 | PDF 421.1 KB |
| test report | Test Report | 2009-07-31 | PDF 822.1 KB |
| Cover Letters | Cover Letter(s) | 2015-04-24 | PDF 318.3 KB |
| Cover letter | Cover Letter(s) | 2015-04-24 | PDF 41 KB |
| agent letter FCC | Cover Letter(s) | 2009-07-31 | PDF 132.9 KB |
| agent letter HME | Cover Letter(s) | 2009-07-31 | PDF 157.7 KB |
| confidential letter | Cover Letter(s) | 2009-07-31 | PDF 125.7 KB |
| modular letter | Cover Letter(s) | 2009-07-31 | PDF 146 KB |
| RF Exposure info | RF Exposure Info | 2015-04-24 | PDF 22.3 KB |
| MPE calculation | RF Exposure Info | 2009-07-31 | PDF 75.8 KB |
| Block Diagram Metadata only | Block Diagram | PDF 40.9 KB | |
| Operational Description Metadata only | Operational Description | PDF 332 KB |
Application Information
| Application ID | 1ka8w6hAgS86Qg5HLnRglQ== |
|---|---|
| Final Action Date | 2015-04-24 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0005870704 |
| Model | XCVR6K1 |
| Frequency Range | 2401.92-2481.408 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Rf MODULE |
| Responsible Party | Douglas Paul Sieh, Electrical Compliance Supervisor, dsieh@hme.com  , 858-848-3729 |
| Test Firm | Charles Neal, Nemko USA, Inc. - San Diego EMC Division, charles.neal@nemko.com  , 613-737-9680 x239 |
| TCB Email | Stuart.Beck@nemko.cm  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is peak conducted. This module is not used in any other products other than those designed by the grantee. Installation of this module into the final product is done by or under the control of the grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 1ka8w6hAgS86Qg5HLnRglQ== | 2015-04-24 | Class II permissive change or modification of presently authorized equipment |
| aFqX03yUZx0qx/t3VdOmjg== | 2009-07-31 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2401.92-2481.408 MHz | 0.0790000 | 15C |
Grants
TCB Grant - Application aFqX03yUZx0qx/t3VdOmjg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko Canada Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 07/31/2009 Application Dated: 07/30/2009 |
| HM Electronics Inc |
| 14110 Stowe Drive |
| Poway, CA 92064 |
| Attention: Karl Knoblock , Electrical Engineering Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BYMXCVR6K1 |
| Name of Grantee: | HM Electronics Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Base Station transceiver for wireless intercom system |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2401.92 - 2481.408 | 0.079 |
| Power listed is peak conducted. This module is not used in any other products other than those designed by the grantee. Installation of this module into the final product is done by or under the control of the grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application aFqX03yUZx0qx/t3VdOmjg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HM Electronics Inc 14110 Stowe Drive Poway, CA 92064 United States |
Date of Grant: 07/31/2009 Application Dated: 07/30/2009 |
| Attention: Karl Knoblock , Electrical Engineering Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BYMXCVR6K1 |
| Name of Grantee: | HM Electronics Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Base Station transceiver for wireless intercom system |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2401.92 - 2481.408 | 0.079 |
| Power listed is peak conducted. This module is not used in any other products other than those designed by the grantee. Installation of this module into the final product is done by or under the control of the grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 04/24/2015 Application Dated: 04/24/2015 |
| HM Electronics Inc |
| 2848 Whiptail Loop |
| Carlsbad, CA 92010 |
| Attention: Douglas Sieh , Electrical Compliance Supervisor |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BYMXCVR6K1 |
| Name of Grantee: | HM Electronics Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Rf MODULE |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2401.92 - 2481.408 | 0.079 |
| Power listed is peak conducted. This module is not used in any other products other than those designed by the grantee. Installation of this module into the final product is done by or under the control of the grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application 1ka8w6hAgS86Qg5HLnRglQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HM Electronics Inc 2848 Whiptail Loop Carlsbad, CA 92010 United States |
Date of Grant: 04/24/2015 Application Dated: 04/24/2015 |
| Attention: Douglas Sieh , Electrical Compliance Supervisor |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | BYMXCVR6K1 |
| Name of Grantee: | HM Electronics Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Rf MODULE |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2401.92 - 2481.408 | 0.079 |
| Power listed is peak conducted. This module is not used in any other products other than those designed by the grantee. Installation of this module into the final product is done by or under the control of the grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |