1. FCC ID
  2. C3K
  3. C3K00002101

FCC ID C3K00002101

Wireless Module

by Microsoft Corporation

Grantee Code: C3K   Product Code: 00002101
Latest application date: 2026-08-20

FCC ID Device Details

FCC IDC3K00002101
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeC3K
Product Code00002101
Applicant BusinessMicrosoft Corporation 🇺🇸
Related Domains microsoft.com
Equipment ClassWireless Module
Test FirmRF Safety Laboratory, LLC

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2472 MHzClass II permissive change or modification of presently authorized equipment2026-08-20
6535-6855 MHzClass II permissive change or modification of presently authorized equipment2026-08-20
5845-5885 MHzClass II permissive change or modification of presently authorized equipment2026-08-20
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2026-08-20
6535-6855 MHzClass II permissive change or modification of presently authorized equipment2026-08-05
2412-2472 MHzClass II permissive change or modification of presently authorized equipment2026-08-05
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2026-08-05
5845-5885 MHzClass II permissive change or modification of presently authorized equipment2026-08-05
2412-2472 MHzClass II permissive change or modification of presently authorized equipment2026-07-24
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2026-07-24
6535-6855 MHzClass II permissive change or modification of presently authorized equipment2026-07-24
5845-5885 MHzClass II permissive change or modification of presently authorized equipment2026-07-24
5955-6415 MHzClass II permissive change or modification of presently authorized equipment2025-04-29
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2025-04-29
5955-6415 MHzClass II permissive change or modification of presently authorized equipment2025-04-10
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2025-04-10
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2025-04-10
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2025-04-10
2412-2472 MHzOriginal Equipment2025-03-26
5180-5240 MHzOriginal Equipment2025-03-26
2402-2480 MHzOriginal Equipment2025-03-26
6535-6855 MHzOriginal Equipment2025-03-26

Exhibits

DocumentTypeAvailableFile
User Manual Metadata onlyUsers Manual2025-07-23PDF 287.6 KB
User Manual v1Users Manual2025-07-23PDF 289.7 KB
Internal PhotographsInternal Photos2025-10-07PDF 1 MB
Internal Pictures V1Internal Photos2025-07-23PDF 564.9 KB
External PhotographsExternal Photos2025-10-07PDF 210.8 KB
External photograph of module and coex filtersExternal Photos2025-10-04PDF 426.1 KB
External Photos Exhibit rev2External Photos2025-07-23PDF 298.6 KB
STC_External Photos Exhibit Metadata onlyExternal Photos2025-07-23PDF 455.8 KB
Label exhibit [2148]ID Label/Location Info2026-08-20PDF 53.4 KB
Label exhibit [2149]ID Label/Location Info2026-08-20PDF 53.6 KB
FCC ID Label and LocationID Label/Location Info2026-08-05PDF 61.7 KB
FCC ID Label and LocationID Label/Location Info2026-07-24PDF 64.3 KB
2109 RF Exposure Part 1 Appendix ITest Setup Photos2025-10-07PDF 1 MB
2109 RF Exposure Part 2 Appendix DTest Setup Photos2025-10-07PDF 1.1 MB
2109 Test Set-up PhotographsTest Setup Photos2025-10-07PDF 1.4 MB
2110 RF Exposure Part 1 Appendix ETest Setup Photos2025-10-07PDF 202.8 KB
2110 Test Set-up PhotographsTest Setup Photos2025-10-07PDF 1.4 MB
Test SETUP PHOTOS EXHIBITTest Setup Photos2025-10-04PDF 1.4 MB
R15374786-EP1 v2 FCC ISED BT BLE SETUP PHOTOS EXHIBITTest Setup Photos2025-07-23PDF 1.4 MB
STC_R15374786-EP2 FCC ISED WLAN SETUP PHOTOSTest Setup Photos2025-07-23PDF 2.2 MB
Test Setup Photos CBPTest Setup Photos2025-07-23PDF 264.4 KB
Test Setup Photos Dual ClientTest Setup Photos2025-07-23PDF 112.6 KB
Model[s] 2148 2149 Antenna Gain Report Metadata onlyTest Report2026-08-20PDF 1.7 MB
Model[s] 2148 2149 Antenna Gain Report_revisedTest Report2026-08-20PDF 1.7 MB
R16215818-E1 FCC IC 2.4GHz_BT_BLE Spotcheck REPORT v3Test Report2026-08-20PDF 2.1 MB
R16215818-E2 FCC IC 5_6GHz Spotcheck REPORT v2 [1]Test Report2026-08-20PDF 5.5 MB
Antenna Gain ReportTest Report2026-08-05PDF 1.4 MB
Bluetooth LE Test ReportTest Report2026-08-05PDF 3.6 MB
Bluetooth Test ReportTest Report2026-08-05PDF 4.8 MB
DFS Test ReportTest Report2026-08-05PDF 774.4 KB
RF Exposure Part 0 Test ReportRF Exposure Info2026-08-05PDF 633.3 KB
RF Exposure Part 1 Test ReportRF Exposure Info2026-08-05PDF 1.4 MB
RF Exposure Part 2 WLAN Test ReportRF Exposure Info2026-08-05PDF 1.2 MB
UNII 5GHz Test ReportTest Report2026-08-05PDF 3.8 MB
WLAN Test ReportTest Report2026-08-05PDF 2.6 MB
WiFi 6GHz Test ReportTest Report2026-08-05PDF 2.7 MB
Antenna Gain ReportTest Report2026-07-24PDF 1.8 MB
Bluetooth LE Test ReportTest Report2026-07-24PDF 1.6 MB
Bluetooth Test ReportTest Report2026-07-24PDF 2.1 MB
RF Exposure Part 0 Test ReportRF Exposure Info2026-07-24PDF 637.6 KB
RF Exposure Part 1 Test ReportRF Exposure Info2026-07-24PDF 1.7 MB
UNII 5GHz Test ReportTest Report2026-07-24PDF 3.9 MB
WLAN Test ReportTest Report2026-07-24PDF 1.7 MB
WiFi 6GHz Test ReportTest Report2026-07-24PDF 2.3 MB
Agent of Service 2.911d5 - C3K00002101Attestation Statements2026-08-20PDF 92.2 KB
FCC Agent 2.911d7Attestation Statements2026-08-20PDF 66.7 KB
Label Attestation FCC C3K00002101Attestation Statements2026-08-20PDF 98.4 KB
Attestation Letter Metadata onlyAttestation Statements2026-08-05PDF 372.2 KB
Authorization LetterAttestation Statements2026-08-05PDF 1 MB
FCC 2.911[d][5] Covered List AttestationAttestation Statements2026-08-05PDF 468 KB
FCC 2.911[d][7] US Agent for Service AttestationAttestation Statements2026-08-05PDF 66.6 KB
NII Attestation Letter Metadata onlyAttestation Statements2026-08-05PDF 358.2 KB
Authorization LetterAttestation Statements2026-07-24PDF 138.8 KB
FCC 2.911 (d)(5) Covered List AttestationAttestation Statements2026-07-24PDF 114.3 KB
FCC 2.911 (d)(7) Agent for Service AttestationAttestation Statements2026-07-24PDF 66.6 KB
FCC LOA MS FTEAttestation Statements2026-07-24PDF 289.9 KB
Class2_permissive change letter [C3K00002101-host 2148]Cover Letter(s)2026-08-20PDF 122 KB
Class2_permissive change letter [C3K00002101-host 2149] rev2Cover Letter(s)2026-08-20PDF 121.8 KB
FCC Agent Authorization Letter [RF Safety]Cover Letter(s)2026-08-20PDF 97.1 KB
FCC LOA MS FTE 1-12-2026Cover Letter(s)2026-08-20PDF 289.9 KB
Request for Confidentiality [C3K00002101]Cover Letter(s)2026-08-20PDF 156.3 KB
Class II Cover LetterCover Letter(s)2026-08-05PDF 235 KB
Confidentiality Request LetterCover Letter(s)2026-08-05PDF 1 MB
Confidentiality Request LetterCover Letter(s)2026-08-05PDF 961.9 KB
Class II Cover LetterCover Letter(s)2026-07-24PDF 122.7 KB
Confidentiality Request LetterCover Letter(s)2026-07-24PDF 78.6 KB
C3K00002101 FCC Part 2 SAR Appendix D - Calibration Certs RevARF Exposure Info2026-08-20PDF 5.8 MB
C3K00002101 FCC Part 2 SAR Report Rev0RF Exposure Info2026-08-20PDF 4.7 MB
C3K00002101 FCC Part0 SAR Report Rev0RF Exposure Info2026-08-20PDF 477.5 KB
C3K00002101 FCC Part1 SAR Appendix A - SAR Test Plots RevARF Exposure Info2026-08-20PDF 639.1 KB
C3K00002101 FCC Part1 SAR Appendix B - Tissue Stimulating Liquids, System ChecksRF Exposure Info2026-08-20PDF 318.4 KB
C3K00002101 FCC Part1 SAR Appendix C - System Check Plots RevARF Exposure Info2026-08-20PDF 757.5 KB
C3K00002101 FCC Part1 SAR Appendix D - Calibration Certificates Part1 Rev0RF Exposure Info2026-08-20PDF 3.6 MB
C3K00002101 FCC Part1 SAR Appendix D - Calibration Certificates Part2 Rev0RF Exposure Info2026-08-20PDF 1.9 MB
C3K00002101 FCC Part1 SAR Appendix E - Simultaneous Transmission Analysis RevARF Exposure Info2026-08-20PDF 259 KB
C3K00002101 FCC Part1 SAR Appendix G - PRV RevBRF Exposure Info2026-08-20PDF 134.5 KB
C3K00002101 FCC Part1 SAR Report RevARF Exposure Info2026-08-20PDF 976.1 KB
C3K00002101 FCC Part2 SAR Appendix A - Verification Plots RevARF Exposure Info2026-08-20PDF 285.7 KB
C3K00002101 FCC Part2 SAR Appendix B - Tissue Simulating Liquids, System ChecksRF Exposure Info2026-08-20PDF 400.7 KB
Compliance Summary ReportRF Exposure Info2026-08-05PDF 382 KB
RF Exposure Part 1 Appendix A SAR Test PlotsRF Exposure Info2026-08-05PDF 444.3 KB
RF Exposure Part 1 Appendix B SAR Dipole Verification PlotsRF Exposure Info2026-08-05PDF 547.9 KB
RF Exposure Part 1 Appendix C SAR Probe and Dipole Calibration Certs 1RF Exposure Info2026-08-05PDF 2.4 MB
RF Exposure Part 1 Appendix C SAR Probe and Dipole Calibration Certs 2RF Exposure Info2026-08-05PDF 2.4 MB
RF Exposure Part 1 Appendix D SAR Tissue SpecificationsRF Exposure Info2026-08-05PDF 513.9 KB
RF Exposure Part 1 Appendix E Multi-Tx and Antenna ConsiderationsRF Exposure Info2026-08-05PDF 339 KB
RF Exposure Part 1 Appendix F Power Reduction VerificationRF Exposure Info2026-08-05PDF 225.5 KB
RF Exposure Part 1 Appendix G SAR System ValidationRF Exposure Info2026-08-05PDF 141.7 KB
RF Exposure Part 1 Appendix H RU SAR ExclusionRF Exposure Info2026-08-05PDF 331.4 KB
RF Exposure Part 2 Appendix A - Verification PlotsRF Exposure Info2026-08-05PDF 298.7 KB
RF Exposure Part 2 Appendix B - Tissue SpecificationsRF Exposure Info2026-08-05PDF 511.5 KB
RF Exposure Part 2 Appendix C - System ValidationRF Exposure Info2026-08-05PDF 141.2 KB
RF Exposure Part 2 Appendix E - Test SequencesRF Exposure Info2026-08-05PDF 290.4 KB
RF Exposure Part 2 Appendix F - Calibration CertificatesRF Exposure Info2026-08-05PDF 3.2 MB
Compliance Summary ReportRF Exposure Info2026-07-24PDF 351.1 KB
RF Exposure Part 1 Appendix A Test PlotsRF Exposure Info2026-07-24PDF 599.2 KB
RF Exposure Part 1 Appendix B Verification PlotsRF Exposure Info2026-07-24PDF 702.5 KB
RF Exposure Part 1 Appendix C Probe and Dipole Calibration Certificates 1RF Exposure Info2026-07-24PDF 4.1 MB
RF Exposure Part 1 Appendix C Probe and Dipole Calibration Certificates 2RF Exposure Info2026-07-24PDF 3.9 MB
RF Exposure Part 1 Appendix D Tissue SpecificationsRF Exposure Info2026-07-24PDF 513.4 KB
RF Exposure Part 1 Appendix E Multi-Tx and Antenna ConsiderationsRF Exposure Info2026-07-24PDF 315.2 KB
RF Exposure Part 1 Appendix F Power Reduction VerificationRF Exposure Info2026-07-24PDF 238.8 KB
RF Exposure Part 1 Appendix G SAR System ValidationRF Exposure Info2026-07-24PDF 142 KB
RF Exposure Part 1 Appendix H RU SAR ExclusionRF Exposure Info2026-07-24PDF 811.6 KB
RF Exposure Part 1 Appendix I Supplemental SAR DataRF Exposure Info2026-07-24PDF 953.8 KB
RF Exposure Part 2 Appendix A Verification PlotsRF Exposure Info2026-07-24PDF 275.9 KB
RF Exposure Part 2 Appendix B Tissue SpecificationsRF Exposure Info2026-07-24PDF 412.1 KB
RF Exposure Part 2 Appendix C System ValidationRF Exposure Info2026-07-24PDF 142.3 KB
RF Exposure Part 2 Appendix E Test SequencesRF Exposure Info2026-07-24PDF 290.4 KB
RF Exposure Part 2 Appendix F Calibration CertificatesRF Exposure Info2026-07-24PDF 3.2 MB
RF Exposure Part 2 ReportRF Exposure Info2026-07-24PDF 1.3 MB
Users Manual Metadata onlyUsers Manual2027-02-01PDF 2.8 MB
Regulatory Information to User Metadata onlyUsers Manual2027-01-01PDF 104.1 KB
STC_Regulatory information to the user Metadata onlyUsers Manual2027-01-01PDF 125.1 KB
STC_Warranty and Compliance Guide Metadata onlyUsers Manual2027-01-01PDF 2.8 MB
Users Manual - Label instruction revised Metadata onlyUsers Manual2027-01-01PDF 36.3 KB
Warranty and Compliance Guide Metadata onlyUsers Manual2027-01-01PDF 2.8 MB
Internal Photographs Metadata onlyInternal Photos2027-02-01PDF 913.7 KB
Internal Photographs Metadata onlyInternal Photos2027-01-01PDF 1.2 MB
STC_model 2148 Internal Photographs Metadata onlyInternal Photos2027-01-01PDF 1.6 MB
model 2149 Internal Photographs-rev Metadata onlyInternal Photos2027-01-01PDF 1.7 MB
External Photographs Metadata onlyExternal Photos2027-02-01PDF 463.9 KB
External Photographs Metadata onlyExternal Photos2027-01-01PDF 506.2 KB
Model 2149 External Photographs Metadata onlyExternal Photos2027-01-01PDF 655.3 KB
STC_Model 2148 External Photographs Metadata onlyExternal Photos2027-01-01PDF 655.5 KB
RF Exposure Part 1 Test Set-up Photographs Metadata onlyTest Setup Photos2027-02-01PDF 461.3 KB
RF Exposure Part 2 Test Set-up Photographs Metadata onlyTest Setup Photos2027-02-01PDF 888 KB
Test Set-up Photographs Metadata onlyTest Setup Photos2027-02-01PDF 1 MB
Antenna Gain Test Setup Photographs Metadata onlyTest Setup Photos2027-01-01PDF 243.6 KB
C3K00002101 FCC Part 2 RF Exposure Appendix C - Test Setup Photos Rev0 Metadata onlyTest Setup Photos2027-01-01PDF 459.6 KB
R16215818-EP1 FCC IC Spotcheck SETUP PHOTOS EXHBIT v2 Metadata onlyTest Setup Photos2027-01-01PDF 2.4 MB
RF Exposure Part 1 Appendix J Test Setup Photographs Metadata onlyTest Setup Photos2027-01-01PDF 1.6 MB
RF Exposure Part 2 Appendix D Test Setup Photographs Metadata onlyTest Setup Photos2027-01-01PDF 1.6 MB
STC_C3K00002101 FCC Part1 SAR Appendix F - DUT Antenna Diagram and Test Setup Ph Metadata onlyTest Setup Photos2027-01-01PDF 1.1 MB
Test Setup Photographs Metadata onlyTest Setup Photos2027-01-01PDF 1.3 MB

Application Information

Application IDwn+f7p41iW5COpTHOcObVQ==
Final Action Date2026-08-20
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0006275291
Model00002101
Frequency Range2412-2472 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWireless Module
Responsible PartyHasnain Syed, Hasnain.Syed@microsoft.com , +1(425)-707-1039
Technical ContactSteve Liu, RF Safety Laboratory, LLC, Steve.liu@rfsafetylab.com , 2402789844
Non-Technical ContactHasnain Syed, Microsoft Corporation, Hasnain.Syed@microsoft.com
Test FirmSteve Liu, RF Safety Laboratory, LLC, Steve.Liu@rfsafetylab.com , 202-240-9240
TCB EmailLST.FRE.CertNotice@ul.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Long-Term ConfidentialityYes
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes

Applications

Application IDDatePurpose
wn+f7p41iW5COpTHOcObVQ==2026-08-20Class II permissive change or modification of presently authorized equipment
nSmaOnlqkaCemlax5WoivA==2026-08-20Class II permissive change or modification of presently authorized equipment
ijiOtti3RzYd9WNTvjVCkA==2026-08-20Class II permissive change or modification of presently authorized equipment
B8e+Ze+HVCyNqInouqLqiQ==2026-08-20Class II permissive change or modification of presently authorized equipment
rk2Wu7FOQVDutWs9XdOVPg==2026-08-05Class II permissive change or modification of presently authorized equipment
qtsr+OBiqfuAr624rkl6+Q==2026-08-05Class II permissive change or modification of presently authorized equipment
nVBWs/H8QpHF3epV+tlAyw==2026-08-05Class II permissive change or modification of presently authorized equipment
1RD1gYna5ypRiQfTKheSSg==2026-08-05Class II permissive change or modification of presently authorized equipment
yBBwcOJudhmOICprsKx7fw==2026-07-24Class II permissive change or modification of presently authorized equipment
TdgqQax/7BzYR1RsBTNaTA==2026-07-24Class II permissive change or modification of presently authorized equipment
K7iGjmNnoSci2SL0jBNtSg==2026-07-24Class II permissive change or modification of presently authorized equipment
1uUdRTTs54LINJ1pCmrBUg==2026-07-24Class II permissive change or modification of presently authorized equipment
M/8G8hR2NKOFymjAQtcG3g==2025-04-29Class II permissive change or modification of presently authorized equipment
IclPAw9Ncrq9I9fHTqGSpQ==2025-04-29Class II permissive change or modification of presently authorized equipment
QGd1SOivnuTOtcMmVdj0jw==2025-04-10Class II permissive change or modification of presently authorized equipment
K7qLnjBbMUV2Nf5SeoiEPg==2025-04-10Class II permissive change or modification of presently authorized equipment
9qfSTPSI1W/V3KvBTO2L6A==2025-04-10Class II permissive change or modification of presently authorized equipment
8v2+cf6pnTpypWbN1wLr/A==2025-04-10Class II permissive change or modification of presently authorized equipment
noqnF45kTbWysiE4eodP8Q==2025-03-26Original Equipment
XDyfc2FJFSNx6TCB75Gmzw==2025-03-26Original Equipment
MeAJBc6Upm9XxAc1yAUlQA==2025-03-26Original Equipment
LHTEbuYPoOhMeXxzBuXqWQ==2025-03-26Original Equipment

Equipment Authorization

FrequencyOutputGrant Notes
2402-2480 MHz0.1040000CC
2402-2480 MHz0.106CC, MO
2412-2472 MHz0.88336, CC, MO
5180-5240 MHz0.09936, CC, MO
5250 MHz0.03936, CC, MO
5260-5320 MHz0.09436, CC, MO
5500-5720 MHz0.12936, CC, MO
5745-5825 MHz0.23136, CC, MO
5815 MHz0.39636, CC, EP, MO
5845-5885 MHz0.65236, CC, EP, MO
5955-6415 MHz0.88136, CC, EP, MO
5955-7115 MHz0.1336, CC, EP, MO
6535-6855 MHz0.8236, CC, EP, MO

Grants

TCB Grant - Application yBBwcOJudhmOICprsKx7fw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Washington DC LLC
(formerly PCTEST) 7185 Oakland Mills Road
Columbia, MD 21046
Date of Grant: 07/24/2026

Application Dated: 07/10/2026
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052-6399
 
Attention: Hasnain Syed , SR. DIR EMC/SI&RF COMPLIANCE

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  C3K00002101
Name of Grantee:  Microsoft Corporation
Equipment Class: Digital Transmission System
Notes: Wireless Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2402.0  -  2480.0 0.106  
36 CC MO 15C 2412.0  -  2472.0 0.883  

Class II permissive change for integration into host tablet model 2150.

Output power is the maximum conducted output power. 802.11 supports 20 MHz bandwidths. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.

Device is a 2 x 2 MIMO configuration, enabled for 2.4 GHz operations as described in this filing.

The highest reported SAR for stand-alone, and simultaneous transmission use conditions is 0.62 W/kg, and 1.59 W/kg, respectively.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application XDyfc2FJFSNx6TCB75Gmzw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 03/26/2025

Application Dated: 03/26/2025
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052-6399
 
Attention: Hasnain Syed , SR. DIR EMC/SI&RF COMPLIANCE

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  C3K00002101
Name of Grantee:  Microsoft Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
36 CC MO 15E 5180.0  -  5240.0 0.099  
36 CC MO 15E 5250.0  -  5250.0 0.039  
36 CC MO 15E 5260.0  -  5320.0 0.094  
36 CC MO 15E 5500.0  -  5720.0 0.129  
36 CC MO 15E 5745.0  -  5825.0 0.231  
36 CC EP MO 15E 5815.0  -  5815.0 0.396  
36 CC EP MO 15E 5845.0  -  5885.0 0.652  

Output power is the maximum conducted output power for 5150 - 5250MHz and 5470 - 5850 MHz. EIRP is listed for UNII-4 and is the maximum EIRP for all output power / antenna gain combinations. There are different power tables for different maximum antenna gains as described in the filing. The device supports bandwidths of 20, 40, 80 and 160 MHz. This modular approval is limited as some of the rf components are outside of the rf shield, requiring testing and filing for a Class II Permissive Change for each integration following the manufacturer's integration instructions. This module is also limited to use by the grantee in the grantee?s products and is not intended for sale to third parties. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. The module antennas must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application wn+f7p41iW5COpTHOcObVQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 08/20/2026

Application Dated: 08/06/2026
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052-6399
 
Attention: Hasnain Syed , SR. DIR EMC/SI&RF COMPLIANCE

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  C3K00002101
Name of Grantee:  Microsoft Corporation
Equipment Class: Digital Transmission System
Notes: Wireless Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2402.0  -  2480.0 0.106  
36 CC MO 15C 2412.0  -  2472.0 0.883  

Class II permissive change for integration into host tablet models 2148 and 2149 respectively. Limited Modular Approval. Output power is the maximum conducted output power. 802.11 supports 20 MHz bandwidths. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Device is a 2 x 2 MIMO configuration, enabled for 2.4 GHz operations as described in this filing. The highest reported SAR values for body and simultaneous exposure conditions under this filing are 0.93 W/Kg and 1.59 W/ Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this FCC ID are 0.93 W/Kg and 1.59 W/Kg respectively.

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application TdgqQax/7BzYR1RsBTNaTA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Washington DC LLC
(formerly PCTEST) 7185 Oakland Mills Road
Columbia, MD 21046
Date of Grant: 07/24/2026

Application Dated: 07/10/2026
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052-6399
 
Attention: Hasnain Syed , SR. DIR EMC/SI&RF COMPLIANCE

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  C3K00002101
Name of Grantee:  Microsoft Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.104  

Class II permissive change for integration into host tablet model 2150.

Power output is maximum conducted power. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.

The highest reported SAR for stand-alone, and simultaneous transmission use conditions is 0.46 W/kg, and 1.59 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application rk2Wu7FOQVDutWs9XdOVPg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Washington DC LLC
(formerly PCTEST) 7185 Oakland Mills Road
Columbia, MD 21046
Date of Grant: 08/05/2026

Application Dated: 07/24/2026
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052-6399
 
Attention: Hasnain Syed , SR. DIR EMC/SI&RF COMPLIANCE

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  C3K00002101
Name of Grantee:  Microsoft Corporation
Equipment Class: 15E 6 GHz Low Power Dual Client
Notes: Wireless Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
36 CC EP MO 15E 5955.0  -  6415.0 0.881  
36 CC EP MO 15E 6535.0  -  6855.0 0.82  
36 CC EP MO 15E 5955.0  -  7115.0 0.13  

Class II permissive change for integration into host model 2145.

Power output is maximum EIRP power. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing.

This device supports 20, 40, 80, 160, and 320 MHz BW modes.

The highest reported SAR in the host device for stand-alone and simultaneous transmission conditions is 0.32 W/kg and 1.08 W/kg, respectively.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application qtsr+OBiqfuAr624rkl6+Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Washington DC LLC
(formerly PCTEST) 7185 Oakland Mills Road
Columbia, MD 21046
Date of Grant: 08/05/2026

Application Dated: 07/24/2026
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052-6399
 
Attention: Hasnain Syed , SR. DIR EMC/SI&RF COMPLIANCE

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  C3K00002101
Name of Grantee:  Microsoft Corporation
Equipment Class: Digital Transmission System
Notes: Wireless Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2402.0  -  2480.0 0.106  
36 CC MO 15C 2412.0  -  2472.0 0.883  

Class II permissive change for integration into host model 2145.

Output power is the maximum conducted output power. 802.11 supports 20 MHz bandwidths. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.

Device is a 2 x 2 MIMO configuration, enabled for 2.4 GHz operations as described in this filing.

The highest reported SAR in the host device for stand-alone and simultaneous transmission conditions is 0.78 W/kg and 1.08 W/kg, respectively.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application QGd1SOivnuTOtcMmVdj0jw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Washington DC LLC
(formerly PCTEST) 7185 Oakland Mills Road
Columbia, MD 21046
Date of Grant: 04/10/2025

Application Dated: 04/10/2025
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052-6399
 
Attention: Hasnain Syed , SR. DIR EMC/SI&RF COMPLIANCE

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  C3K00002101
Name of Grantee:  Microsoft Corporation
Equipment Class: 15E 6 GHz Low Power Dual Client
Notes: Wireless Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
36 CC EP MO 15E 5955.0  -  6415.0 0.881  
36 CC EP MO 15E 6535.0  -  6855.0 0.82  
36 CC EP MO 15E 5955.0  -  7115.0 0.13  

Class II permissive change for integration into host tablet models 2109 and 2110 respectively. Power output is maximum conducted power. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. This device supports 20, 40, 80, 160, and 320 MHz BW modes. The highest reported SAR for stand-alone, and simultaneous transmission use conditions is 0.96 W/kg, and 1.54 W/kg, respectively.

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application nVBWs/H8QpHF3epV+tlAyw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Washington DC LLC
(formerly PCTEST) 7185 Oakland Mills Road
Columbia, MD 21046
Date of Grant: 08/05/2026

Application Dated: 07/24/2026
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052-6399
 
Attention: Hasnain Syed , SR. DIR EMC/SI&RF COMPLIANCE

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  C3K00002101
Name of Grantee:  Microsoft Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.104  

Class II permissive change for integration into host model 2145.

Power output is maximum conducted power. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.

The highest reported SAR in the host device for stand-alone and simultaneous transmission conditions is 0.21 W/kg and 1.08 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application nSmaOnlqkaCemlax5WoivA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 08/20/2026

Application Dated: 08/06/2026
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052-6399
 
Attention: Hasnain Syed , SR. DIR EMC/SI&RF COMPLIANCE

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  C3K00002101
Name of Grantee:  Microsoft Corporation
Equipment Class: 15E 6 GHz Low Power Dual Client
Notes: Wireless Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
36 CC EP MO 15E 5955.0  -  6415.0 0.881  
36 CC EP MO 15E 6535.0  -  6855.0 0.82  
36 CC EP MO 15E 5955.0  -  7115.0 0.13  

Class II permissive change for integration into host tablet models 2148 and 2149 respectively. Limited Modular Approval. Output power is the maximum EIRP for all output power / antenna gain combinations. The installation instructions detail maximum antenna gain values for the different output power tables. The minimum antenna gain is 1.1dBi for UNII-5 and UNII-7 and 0dBi for UNII-6 and UNII-8. This device supports 20, 40, 80, 160 and 320 MHz bandwidths. This modular approval is limited as some of the rf components are outside of the rf shield, requiring testing and filing for a Class II Permissive Change for each integration following the manufacturer's integration instructions. This module is also limited to use by the grantee in the grantee?s products and is not intended for sale to third parties. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The highest reported SAR values for body and simultaneous exposure conditions under this filing are 0.96 W/Kg and 1.59 W/ Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this FCC ID are 1.12 W/Kg and 1.59 W/Kg respectively.

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application noqnF45kTbWysiE4eodP8Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 03/26/2025

Application Dated: 03/26/2025
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052-6399
 
Attention: Hasnain Syed , SR. DIR EMC/SI&RF COMPLIANCE

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  C3K00002101
Name of Grantee:  Microsoft Corporation
Equipment Class: Digital Transmission System
Notes: Wireless Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2402.0  -  2480.0 0.106  
36 CC MO 15C 2412.0  -  2472.0 0.883  

Output power is the maximum conducted output power. There are different power tables for different maximum antenna gains as described in the filing. 802.11 supports 20 MHz bandwidths. This modular approval is limited as some of the rf components are outside of the rf shield, requiring testing and filing for a Class II Permissive Change for each integration following the manufacturer's integration instructions. This module is also limited to use by the grantee in the grantee?s products and is not intended for sale to third parties. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. The module antennas must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application MeAJBc6Upm9XxAc1yAUlQA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 03/26/2025

Application Dated: 03/26/2025
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052-6399
 
Attention: Hasnain Syed , SR. DIR EMC/SI&RF COMPLIANCE

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  C3K00002101
Name of Grantee:  Microsoft Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.104  

Output power is the maximum conducted output power. There are different power tables for different maximum antenna gains as described in the filing. This modular approval is limited as some of the rf components are outside of the rf shield, requiring testing and filing for a Class II Permissive Change for each integration following the manufacturer's integration instructions. This module is also limited to use by the grantee in the grantee?s products and is not intended for sale to third parties. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. The module antennas must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.

CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application M/8G8hR2NKOFymjAQtcG3g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 04/29/2025

Application Dated: 04/29/2025
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052-6399
 
Attention: Hasnain Syed , SR. DIR EMC/SI&RF COMPLIANCE

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  C3K00002101
Name of Grantee:  Microsoft Corporation
Equipment Class: 15E 6 GHz Low Power Dual Client
Notes: Wireless Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
36 CC EP MO 15E 5955.0  -  6415.0 0.881  
36 CC EP MO 15E 6535.0  -  6855.0 0.82  
36 CC EP MO 15E 5955.0  -  7115.0 0.13  

C2PC filing to add coexistence filters to the rf paths for the 5/6 GHz transmission lines located on the host. Output power is reduced for some 802.11 modes in the 5GHz and 6GHz bands. Output power is the maximum EIRP for all output power / antenna gain combinations. The installation instructions detail maximum antenna gain values for the different output power tables. The minimum antenna gain is 1.1dBi for UNII-5 and UNII-7 and 0dBi for UNII-6 and UNII-8. This device supports bandwidths of 20, 40, 80, 160 and 320 MHz. This modular approval is limited as some of the rf components are outside of the rf shield, requiring the host integrator to perform additional verification testing as detailed in the manufacturer's integration instructions. This module is also limited to use by the grantee in the grantee?s products and is not intended for sale to third parties. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. The module antennas must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application LHTEbuYPoOhMeXxzBuXqWQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 03/26/2025

Application Dated: 03/26/2025
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052-6399
 
Attention: Hasnain Syed , SR. DIR EMC/SI&RF COMPLIANCE

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  C3K00002101
Name of Grantee:  Microsoft Corporation
Equipment Class: 15E 6 GHz Low Power Dual Client
Notes: Wireless Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
36 CC EP MO 15E 5955.0  -  6415.0 0.881  
36 CC EP MO 15E 6535.0  -  6855.0 0.82  
36 CC EP MO 15E 5955.0  -  7115.0 0.13  

Output power is the maximum EIRP for all output power / antenna gain combinations. The installation instructions detail maximum antenna gain values for the different output power tables. The minimum antenna gain is 1.1dBi for UNII-5 and UNII-7 and 0dBi for UNII-6 and UNII-8. This device supports 20, 40, 80, 160 and 320 MHz bandwidths. This modular approval is limited as some of the rf components are outside of the rf shield, requiring testing and filing for a Class II Permissive Change for each integration following the manufacturer's integration instructions. This module is also limited to use by the grantee in the grantee?s products and is not intended for sale to third parties. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. The module antennas must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application K7qLnjBbMUV2Nf5SeoiEPg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Washington DC LLC
(formerly PCTEST) 7185 Oakland Mills Road
Columbia, MD 21046
Date of Grant: 04/10/2025

Application Dated: 04/10/2025
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052-6399
 
Attention: Hasnain Syed , SR. DIR EMC/SI&RF COMPLIANCE

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  C3K00002101
Name of Grantee:  Microsoft Corporation
Equipment Class: Digital Transmission System
Notes: Wireless Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15C 2402.0  -  2480.0 0.106  
36 CC MO 15C 2412.0  -  2472.0 0.883  

Class II permissive change for integration into host tablet models 2109 and 2110 respectively. Output power is the maximum conducted output power. 802.11 supports 20 MHz bandwidths. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Device is a 2 x 2 MIMO configuration, enabled for 2.4 GHz operations as described in this filing. The highest reported SAR for stand-alone, and simultaneous transmission use conditions is 0.92 W/kg, and 1.54 W/kg, respectively

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application K7iGjmNnoSci2SL0jBNtSg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Washington DC LLC
(formerly PCTEST) 7185 Oakland Mills Road
Columbia, MD 21046
Date of Grant: 07/24/2026

Application Dated: 07/10/2026
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052-6399
 
Attention: Hasnain Syed , SR. DIR EMC/SI&RF COMPLIANCE

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  C3K00002101
Name of Grantee:  Microsoft Corporation
Equipment Class: 15E 6 GHz Low Power Dual Client
Notes: Wireless Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
36 CC EP MO 15E 5955.0  -  6415.0 0.881  
36 CC EP MO 15E 6535.0  -  6855.0 0.82  
36 CC EP MO 15E 5955.0  -  7115.0 0.13  

Class II permissive change for integration into host tablet model 2150.

Power output is maximum EIRP power. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.

Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing.

This device supports 20, 40, 80, 160, and 320 MHz BW modes.

The highest reported SAR for stand-alone, and simultaneous transmission use conditions is 1.12 W/kg, and 1.59 W/kg, respectively.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application ijiOtti3RzYd9WNTvjVCkA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 08/20/2026

Application Dated: 08/06/2026
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052-6399
 
Attention: Hasnain Syed , SR. DIR EMC/SI&RF COMPLIANCE

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  C3K00002101
Name of Grantee:  Microsoft Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
36 CC MO 15E 5180.0  -  5240.0 0.099  
36 CC MO 15E 5250.0  -  5250.0 0.039  
36 CC MO 15E 5260.0  -  5320.0 0.094  
36 CC MO 15E 5500.0  -  5720.0 0.129  
36 CC MO 15E 5745.0  -  5825.0 0.231  
36 CC EP MO 15E 5815.0  -  5815.0 0.396  
36 CC EP MO 15E 5845.0  -  5885.0 0.652  

Class II permissive change for integration into host tablet models 2148 and 2149 respectively. Limited Modular Approval. Output power is the maximum conducted output power for 5150 - 5250MHz and 5470 - 5850 MHz. EIRP is listed for UNII-4 and is the maximum EIRP for all output power / antenna gain combinations. There are different power tables for different maximum antenna gains as described in the filing. The device supports bandwidths of 20, 40, 80 and 160 MHz. This modular approval is limited as some of the rf components are outside of the rf shield, requiring testing and filing for a Class II Permissive Change for each integration following the manufacturer's integration instructions. This module is also limited to use by the grantee in the grantee?s products and is not intended for sale to third parties. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.

The highest reported SAR values for body and simultaneous exposure conditions under this filing are 0.86 W/Kg and 1.59 W/ Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this FCC ID are 0.90 W/Kg and 1.59 W/Kg respectively.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application IclPAw9Ncrq9I9fHTqGSpQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 04/29/2025

Application Dated: 04/29/2025
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052-6399
 
Attention: Hasnain Syed , SR. DIR EMC/SI&RF COMPLIANCE

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  C3K00002101
Name of Grantee:  Microsoft Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
36 CC MO 15E 5180.0  -  5240.0 0.099  
36 CC MO 15E 5250.0  -  5250.0 0.039  
36 CC MO 15E 5260.0  -  5320.0 0.094  
36 CC MO 15E 5500.0  -  5720.0 0.129  
36 CC MO 15E 5745.0  -  5825.0 0.231  
36 CC EP MO 15E 5815.0  -  5815.0 0.396  
36 CC EP MO 15E 5845.0  -  5885.0 0.652  

C2PC filing to add coexistence filters to the rf paths for the 5/6 GHz transmission lines located on the host. Output power is reduced for some 802.11 modes in the 5GHz and 6GHz bands. Output power is the maximum conducted output power for 5150 - 5250MHz and 5470 - 5850 MHz. EIRP is listed for UNII-4 and is the maximum EIRP for all output power / antenna gain combinations. There are different power tables for different maximum antenna gains as described in the filing. This device supports bandwidths of 20, 40, 80 and 160 MHz. This modular approval is limited as some of the rf components are outside of the rf shield, requiring the host integrator to perform additional verification testing as detailed in the manufacturer's integration instructions. This module is also limited to use by the grantee in the grantee?s products and is not intended for sale to third parties. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. The module antennas must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application B8e+Ze+HVCyNqInouqLqiQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 08/20/2026

Application Dated: 08/06/2026
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052-6399
 
Attention: Hasnain Syed , SR. DIR EMC/SI&RF COMPLIANCE

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  C3K00002101
Name of Grantee:  Microsoft Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.104  

Class II permissive change for integration into host tablet models 2148 and 2149 respectively. Limited Modular Approval. Power output is maximum conducted power. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The highest reported SAR values for body and simultaneous exposure conditions under this filing are 0.58 W/Kg and 1.59 W/ Kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this FCC ID are 0.58 W/Kg and 1.59 W/Kg respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 9qfSTPSI1W/V3KvBTO2L6A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Washington DC LLC
(formerly PCTEST) 7185 Oakland Mills Road
Columbia, MD 21046
Date of Grant: 04/10/2025

Application Dated: 04/10/2025
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052-6399
 
Attention: Hasnain Syed , SR. DIR EMC/SI&RF COMPLIANCE

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  C3K00002101
Name of Grantee:  Microsoft Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.104  

Class II permissive change for integration into host tablet models 2109 and 2110 respectively. Power output is maximum conducted power. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The highest reported SAR for stand-alone, and simultaneous transmission use conditions is 0.88 W/kg, and 1.54 W/kg, respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 8v2+cf6pnTpypWbN1wLr/A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Element Materials Technology Washington DC LLC
(formerly PCTEST) 7185 Oakland Mills Road
Columbia, MD 21046
Date of Grant: 04/10/2025

Application Dated: 04/10/2025
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052-6399
 
Attention: Hasnain Syed , SR. DIR EMC/SI&RF COMPLIANCE

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  C3K00002101
Name of Grantee:  Microsoft Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
36 CC MO 15E 5180.0  -  5240.0 0.099  
36 CC MO 15E 5250.0  -  5250.0 0.039  
36 CC MO 15E 5260.0  -  5320.0 0.094  
36 CC MO 15E 5500.0  -  5720.0 0.129  
36 CC MO 15E 5745.0  -  5825.0 0.231  
36 CC EP MO 15E 5815.0  -  5815.0 0.396  
36 CC EP MO 15E 5845.0  -  5885.0 0.652  

Class II permissive change for integration into host tablet models 2109 and 2110 respectively. Output power is the maximum conducted output power for 5150 - 5250MHz and 5470 - 5850 MHz. EIRP is listed for UNII-4 and is the maximum EIRP for all output power / antenna gain combinations. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz operations as described in this filing. This device supports 20, 40, 80, and 160 MHz BW modes. The highest reported SAR for stand-alone, and simultaneous transmission use conditions is 1.08 W/kg, and 1.54 W/kg, respectively.

36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.
CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.