FCC ID CASTMAB1B

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515

Date of Grant: 10/19/2004 Application Dated: 10/19/2004

Tait International Limited

245 Wooldridge Road

HarewoodP.O. Box 1645,

Christchurch, 8051 New Zealand

Attention: Brian Emmett , Standards and Regulatory Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CASTMAB1B
Name of Grantee:	Tait International Limited
Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	Mobile Transceiver

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BE	22, 74, 90, 90.210	136.0  -  174.0	50.0	1.5  PM	11K0F3E
BE	22, 74, 90, 90.210	136.0  -  174.0	50.0	1.5  PM	16K0F3E
BE	22, 74, 90, 90.210	136.0  -  174.0	50.0	1.5  PM	4K80F2D
BE	22, 74, 90, 90.210	136.0  -  174.0	50.0	1.5  PM	8K40F2D
BE	22, 74, 90, 90.210	136.0  -  174.0	50.0	1.5  PM	7K70F1D
BE	22, 74, 90, 90.210	136.0  -  174.0	50.0	1.5  PM	12K6F1D

Output power is conducted maximum per 90.205(r); nominal output power is 50 Watts. RF exposure compliance was evaluated using 2.15 dBi or 5.15 dBi vehicle-mount antennas only. Qualified end-users of this device must have the knowledge to control the exposure conditions of vehicle passengers, and of bystanders to ensure a minimum separation distance of 90 cm is maintained between the antenna and persons outside of the vehicle for satisfying MPE compliance. All qualified end users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 90 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device must be used with a maximum transmitting duty factor not exceeding 50% for satisfying RF exposure compliance. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work related use only. End-users must be provided with specific training instructions for meeting Occupational/Controlled Exposure Environment requirements.

BE:	The output power is continuously variable from the value listed in this entry to 15%-20% of the value listed.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Tait International Limited 245 Wooldridge Road HarewoodP.O. Box 1645, Christchurch, 8051 New Zealand

Date of Grant: 10/19/2004 Application Dated: 10/19/2004

Attention: Brian Emmett , Standards and Regulatory Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CASTMAB1B
Name of Grantee:	Tait International Limited
Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	Mobile Transceiver
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BE	22, 74, 90, 90.210	136.0  -  174.0	50.0	1.5  PM	11K0F3E
BE	22, 74, 90, 90.210	136.0  -  174.0	50.0	1.5  PM	16K0F3E
BE	22, 74, 90, 90.210	136.0  -  174.0	50.0	1.5  PM	4K80F2D
BE	22, 74, 90, 90.210	136.0  -  174.0	50.0	1.5  PM	8K40F2D
BE	22, 74, 90, 90.210	136.0  -  174.0	50.0	1.5  PM	7K70F1D
BE	22, 74, 90, 90.210	136.0  -  174.0	50.0	1.5  PM	12K6F1D

Output power is conducted maximum per 90.205(r); nominal output power is 50 Watts. RF exposure compliance was evaluated using 2.15 dBi or 5.15 dBi vehicle-mount antennas only. Qualified end-users of this device must have the knowledge to control the exposure conditions of vehicle passengers, and of bystanders to ensure a minimum separation distance of 90 cm is maintained between the antenna and persons outside of the vehicle for satisfying MPE compliance. All qualified end users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 90 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device must be used with a maximum transmitting duty factor not exceeding 50% for satisfying RF exposure compliance. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work related use only. End-users must be provided with specific training instructions for meeting Occupational/Controlled Exposure Environment requirements.

BE:	The output power is continuously variable from the value listed in this entry to 15%-20% of the value listed.

TCB Grant - Application 3/GtdOYvRJwqM6/eDNFvqA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515

Date of Grant: 07/11/2017 Application Dated: 07/11/2017

Tait Limited

535 Wairakei Rd

P.O. Box 1645,

Christchurch, 8140 New Zealand

Attention: David Jackson , Test Laboratory Services Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CASTMAB1B
Name of Grantee:	Tait Limited
Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	Mobile Transceiver

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BE EF	22, 74, 90, 90.210	136.0  -  174.0	50.0	1.5  PM	11K0F3E
BE EF	22, 74, 90, 90.210	136.0  -  174.0	50.0	1.5  PM	4K80F2D
BE EF	22, 74, 90, 90.210	136.0  -  174.0	50.0	1.5  PM	7K70F1D
BE EF	22, 74, 90, 90.210	136.0  -  174.0	50.0	1.5  PM	6K50F1D

Output power is conducted maximum per 90.205(r); nominal output power is 50 Watts. RF exposure compliance was evaluated using 2.15 dBi or 5.15 dBi vehicle-mount antennas only. Qualified end-users of this device must have the knowledge to control the exposure conditions of vehicle passengers, and of bystanders to ensure a minimum separation distance of 90 cm is maintained between the antenna and persons outside of the vehicle for satisfying MPE compliance. All qualified end users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 90 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device must be used with a maximum transmitting duty factor not exceeding 50% for satisfying RF exposure compliance. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work related use only. End-users must be provided with specific training instructions for meeting Occupational/Controlled Exposure Environment requirements. Class 2 Permissive Change to add emission designator.

BE:	The output power is continuously variable from the value listed in this entry to 15%-20% of the value listed.
EF:	This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Tait Limited 535 Wairakei Rd P.O. Box 1645, Christchurch, 8140 New Zealand

Date of Grant: 07/11/2017 Application Dated: 07/11/2017

Attention: David Jackson , Test Laboratory Services Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	CASTMAB1B
Name of Grantee:	Tait Limited
Equipment Class:	Licensed Non-Broadcast Station Transmitter
Notes:	Mobile Transceiver
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BE EF	22, 74, 90, 90.210	136.0  -  174.0	50.0	1.5  PM	11K0F3E
BE EF	22, 74, 90, 90.210	136.0  -  174.0	50.0	1.5  PM	4K80F2D
BE EF	22, 74, 90, 90.210	136.0  -  174.0	50.0	1.5  PM	7K70F1D
BE EF	22, 74, 90, 90.210	136.0  -  174.0	50.0	1.5  PM	6K50F1D

Output power is conducted maximum per 90.205(r); nominal output power is 50 Watts. RF exposure compliance was evaluated using 2.15 dBi or 5.15 dBi vehicle-mount antennas only. Qualified end-users of this device must have the knowledge to control the exposure conditions of vehicle passengers, and of bystanders to ensure a minimum separation distance of 90 cm is maintained between the antenna and persons outside of the vehicle for satisfying MPE compliance. All qualified end users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 90 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device must be used with a maximum transmitting duty factor not exceeding 50% for satisfying RF exposure compliance. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work related use only. End-users must be provided with specific training instructions for meeting Occupational/Controlled Exposure Environment requirements. Class 2 Permissive Change to add emission designator.

BE:	The output power is continuously variable from the value listed in this entry to 15%-20% of the value listed.
EF:	This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

Mail To: