FCC ID CASTMAH5B
Mobile Transceiver
by Tait International Limited
Grantee Code: CAS Product Code: TMAH5B
Latest application date: 2014-08-21
FCC ID Device Details
| FCC ID | CASTMAH5B |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | CAS |
| Product Code | TMAH5B |
| Applicant Business | Tait International Limited 🇳🇿 |
| Related Domains |  taitradio.com |
| Equipment Class | Mobile Transceiver |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 406.1-470 MHz | Class II permissive change or modification of presently authorized equipment | 2014-08-21 |
| 400-470 MHz | Original Equipment | 2004-10-14 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Exhibit D Users Manual per 2 1033 c3 | Users Manual | 2004-10-14 | PDF 721.1 KB |
| Exhibit C Internal Photographs per 2 1033 c12 | Internal Photos | 2004-10-14 | PDF 1.6 MB |
| Exhibit C External Photographs per 2 1033 c12 | External Photos | 2004-10-14 | PDF 1.4 MB |
| Exhibit A ID Label and location per 2 1033 c2 and c11 | ID Label/Location Info | 2004-10-14 | PDF 550.2 KB |
| Exhibit E MPE report per 2 1033 c14 | Test Report | 2004-10-14 | PDF 188.8 KB |
| Exhibit E Test Measurement Report per 2 1033 c14 | Test Report | 2004-10-14 | PDF 321.2 KB |
| Beacon Statement | Attestation Statements | 2004-10-14 | PDF 133.6 KB |
| Cover Letter Requesting Class II Permissive Change | Cover Letter(s) | 2014-08-21 | PDF 40.5 KB |
| Cover Letter for Extended Frequency Range | Cover Letter(s) | 2014-08-21 | PDF 37.9 KB |
| Cover Letter Requesting Confidentiality | Cover Letter(s) | 2004-10-14 | PDF 31.7 KB |
| Misc Tune Up Procedure Exhibits | Parts List/Tune Up Info | 2004-10-14 | PDF 592.7 KB |
Application Information
| Application ID | sPEiFSp+eN9r8W6KzUNQ9A== |
|---|---|
| Final Action Date | 2014-08-21 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0003768611 |
| Model | TMAH5B |
| Frequency Range | 406.1-470 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | Mobile Transceiver |
| Responsible Party | Brian Emmett, Standards and Regulatory Manager, brian.emmett@taitradio.com , 64 3 358 0403 |
| TCB Email | decrowder@elitetest.com  |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz) |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power is conducted maximum per 90.205(r); nominal output power is 40 Watts. RF exposure compliance was evaluated using 2.15 dBi or 5.65 dBi vehicle-mount antennas only. Qualified end-users of this device must have the knowledge to control the exposure conditions of vehicle passengers, and of bystanders to ensure a minimum separation distance of 90 cm is maintained between the antenna and persons outside of the vehicle for satisfying MPE compliance. All qualified end users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 90 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device must be used with a maximum transmitting duty factor not exceeding 50% for satisfying RF exposure compliance. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work related use only. End-users must be provided with specific training instructions for meeting Occupational/Controlled Exposure Environment requirements. Class II Permissive Change to correct emission designators. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| sPEiFSp+eN9r8W6KzUNQ9A== | 2014-08-21 | Class II permissive change or modification of presently authorized equipment |
| ahJkwonCLgOKru7V9HiIoQ== | 2004-10-14 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 400-470 MHz | 40 | 1.5ppm | 11K0F3E | 22, 74, 90, 90.210, 95A | BF |
| 400-470 MHz | 40 | 1.5ppm | 16K0F3E | 22, 74, 90, 90.210, 95A | BF |
| 400-470 MHz | 40 | 1.5ppm | 4K80F2D | 22, 74, 90, 90.210, 95A | BF |
| 400-470 MHz | 40 | 1.5ppm | 8K40F2D | 22, 74, 90, 90.210, 95A | BF |
| 400-470 MHz | 40 | 1.5ppm | 7K70F1D | 22, 74, 90, 90.210, 95A | BF |
| 400-470 MHz | 40 | 1.5ppm | 12K6F1D | 22, 74, 90, 90.210, 95A | BF |
| 406.1-470 MHz | 40 | 1.5ppm | 11K0F3E | 22, 9 | BF, EF |
| 406.1-470 MHz | 40 | 1.5ppm | 6K60F2D | 22, 9 | BF, EF |
| 406.1-470 MHz | 40 | 1.5ppm | 7K70F1D | 22, 9 | BF, EF |
Grants
TCB Grant - Application sPEiFSp+eN9r8W6KzUNQ9A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515 |
Date of Grant: 08/21/2014 Application Dated: 08/21/2014 |
| Tait International Limited |
| 245 Wooldridge Road |
| HarewoodP.O. Box 1645, |
| Christchurch, 8051 New Zealand |
| Attention: Brian Emmett , Standards and Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CASTMAH5B |
| Name of Grantee: | Tait International Limited |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Mobile Transceiver |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BF EF | 22, 90 | 406.1 - 470.0 | 40.0 | 1.5 PM | 11K0F3E |
| BF EF | 22, 90 | 406.1 - 470.0 | 40.0 | 1.5 PM | 6K60F2D |
| BF EF | 22, 90 | 406.1 - 470.0 | 40.0 | 1.5 PM | 7K70F1D |
| Output power is conducted maximum per 90.205(r); nominal output power is 40 Watts. RF exposure compliance was evaluated using 2.15 dBi or 5.65 dBi vehicle-mount antennas only. Qualified end-users of this device must have the knowledge to control the exposure conditions of vehicle passengers, and of bystanders to ensure a minimum separation distance of 90 cm is maintained between the antenna and persons outside of the vehicle for satisfying MPE compliance. All qualified end users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 90 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device must be used with a maximum transmitting duty factor not exceeding 50% for satisfying RF exposure compliance. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work related use only. End-users must be provided with specific training instructions for meeting Occupational/Controlled Exposure Environment requirements. Class II Permissive Change to correct emission designators. |
| BF: | The output power is continuously variable from the value listed in this entry to 20%-25% of the value listed. |
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
EAS Grant - Application sPEiFSp+eN9r8W6KzUNQ9A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tait International Limited 245 Wooldridge Road HarewoodP.O. Box 1645, Christchurch, 8051 New Zealand |
Date of Grant: 08/21/2014 Application Dated: 08/21/2014 |
| Attention: Brian Emmett , Standards and Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CASTMAH5B |
| Name of Grantee: | Tait International Limited |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Mobile Transceiver |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BF EF | 22, 90 | 406.1 - 470.0 | 40.0 | 1.5 PM | 11K0F3E |
| BF EF | 22, 90 | 406.1 - 470.0 | 40.0 | 1.5 PM | 6K60F2D |
| BF EF | 22, 90 | 406.1 - 470.0 | 40.0 | 1.5 PM | 7K70F1D |
| Output power is conducted maximum per 90.205(r); nominal output power is 40 Watts. RF exposure compliance was evaluated using 2.15 dBi or 5.65 dBi vehicle-mount antennas only. Qualified end-users of this device must have the knowledge to control the exposure conditions of vehicle passengers, and of bystanders to ensure a minimum separation distance of 90 cm is maintained between the antenna and persons outside of the vehicle for satisfying MPE compliance. All qualified end users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 90 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device must be used with a maximum transmitting duty factor not exceeding 50% for satisfying RF exposure compliance. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work related use only. End-users must be provided with specific training instructions for meeting Occupational/Controlled Exposure Environment requirements. Class II Permissive Change to correct emission designators. |
| BF: | The output power is continuously variable from the value listed in this entry to 20%-25% of the value listed. |
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515 |
Date of Grant: 10/14/2004 Application Dated: 10/14/2004 |
| Tait International Limited |
| 245 Wooldridge Road |
| HarewoodP.O. Box 1645, |
| Christchurch, 8051 New Zealand |
| Attention: Brian Emmett , Standards and Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CASTMAH5B |
| Name of Grantee: | Tait International Limited |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Mobile Transceiver |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BF | 22, 74, 90, 95A, 90.210 | 400.0 - 470.0 | 40.0 | 1.5 PM | 11K0F3E |
| BF | 22, 74, 90, 95A, 90.210 | 400.0 - 470.0 | 40.0 | 1.5 PM | 16K0F3E |
| BF | 22, 74, 90, 95A, 90.210 | 400.0 - 470.0 | 40.0 | 1.5 PM | 4K80F2D |
| BF | 22, 74, 90, 95A, 90.210 | 400.0 - 470.0 | 40.0 | 1.5 PM | 8K40F2D |
| BF | 22, 74, 90, 95A, 90.210 | 400.0 - 470.0 | 40.0 | 1.5 PM | 7K70F1D |
| BF | 22, 74, 90, 95A, 90.210 | 400.0 - 470.0 | 40.0 | 1.5 PM | 12K6F1D |
| Output power is conducted maximum per 90.205(r); nominal output power is 40 Watts. RF exposure compliance was evaluated using 2.15 dBi or 5.65 dBi vehicle-mount antennas only. Qualified end-users of this device must have the knowledge to control the exposure conditions of vehicle passengers, and of bystanders to ensure a minimum separation distance of 90 cm is maintained between the antenna and persons outside of the vehicle for satisfying MPE compliance. All qualified end users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 90 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device must be used with a maximum transmitting duty factor not exceeding 50% for satisfying RF exposure compliance. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work related use only. End-users must be provided with specific training instructions for meeting Occupational/Controlled Exposure Environment requirements. |
| BF: | The output power is continuously variable from the value listed in this entry to 20%-25% of the value listed. |
EAS Grant - Application ahJkwonCLgOKru7V9HiIoQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tait International Limited 245 Wooldridge Road HarewoodP.O. Box 1645, Christchurch, 8051 New Zealand |
Date of Grant: 10/14/2004 Application Dated: 10/14/2004 |
| Attention: Brian Emmett , Standards and Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CASTMAH5B |
| Name of Grantee: | Tait International Limited |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Mobile Transceiver |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BF | 22, 74, 90, 95A, 90.210 | 400.0 - 470.0 | 40.0 | 1.5 PM | 11K0F3E |
| BF | 22, 74, 90, 95A, 90.210 | 400.0 - 470.0 | 40.0 | 1.5 PM | 16K0F3E |
| BF | 22, 74, 90, 95A, 90.210 | 400.0 - 470.0 | 40.0 | 1.5 PM | 4K80F2D |
| BF | 22, 74, 90, 95A, 90.210 | 400.0 - 470.0 | 40.0 | 1.5 PM | 8K40F2D |
| BF | 22, 74, 90, 95A, 90.210 | 400.0 - 470.0 | 40.0 | 1.5 PM | 7K70F1D |
| BF | 22, 74, 90, 95A, 90.210 | 400.0 - 470.0 | 40.0 | 1.5 PM | 12K6F1D |
| Output power is conducted maximum per 90.205(r); nominal output power is 40 Watts. RF exposure compliance was evaluated using 2.15 dBi or 5.65 dBi vehicle-mount antennas only. Qualified end-users of this device must have the knowledge to control the exposure conditions of vehicle passengers, and of bystanders to ensure a minimum separation distance of 90 cm is maintained between the antenna and persons outside of the vehicle for satisfying MPE compliance. All qualified end users of this device must receive training to have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 90 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device must be used with a maximum transmitting duty factor not exceeding 50% for satisfying RF exposure compliance. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work related use only. End-users must be provided with specific training instructions for meeting Occupational/Controlled Exposure Environment requirements. |
| BF: | The output power is continuously variable from the value listed in this entry to 20%-25% of the value listed. |
| Mail To: |