FCC ID CASTMAH6A
Mobile Transceiver
by Tait International Limited
Grantee Code: CAS Product Code: TMAH6A
Latest application date: 2004-01-28
FCC ID Device Details
| FCC ID | CASTMAH6A |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | CAS |
| Product Code | TMAH6A |
| Applicant Business | Tait International Limited 🇳🇿 |
| Related Domains |  taitradio.com  tait.co.nz |
| Equipment Class | Mobile Transceiver |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 450-530 MHz | Class II permissive change or modification of presently authorized equipment | 2004-01-28 |
| 450-530 MHz | Original Equipment | 2003-10-09 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Exhibit D Users Manual per 2 1033 c3 | Users Manual | 2003-10-09 | PDF 957.1 KB |
| Exhibit C Internal Photographs per 2 1033 c12 | Internal Photos | 2003-10-09 | PDF 1.2 MB |
| Exhibit C External Photographs per 2 1033 c12 | External Photos | 2003-10-09 | PDF 1.4 MB |
| Exhibit A ID Label and location per 2 1033 c2 and c11 | ID Label/Location Info | 2003-10-09 | PDF 595.6 KB |
| Class 2Test Report | Test Report | 2004-01-28 | PDF 134.1 KB |
| Exhibit E Test Measurement Report per 2 1033 c14 | Test Report | 2003-10-09 | PDF 525.4 KB |
| Application Letter | Cover Letter(s) | 2004-01-28 | PDF 80.4 KB |
| Reply to FCC 26246 | Cover Letter(s) | 2004-01-28 | PDF 63.1 KB |
| Updated Cover Letter | Cover Letter(s) | 2004-01-28 | PDF 80.5 KB |
| Cover Letter Requesting Confidentiality | Cover Letter(s) | 2003-10-09 | PDF 31.6 KB |
| Misc Parts List Exhibits | Parts List/Tune Up Info | 2003-10-09 | PDF 73.5 KB |
| Misc Tune Up Procedure Exhibits | Parts List/Tune Up Info | 2003-10-09 | PDF 706.7 KB |
| RF Hazard Test Measurement Report | RF Exposure Info | 2003-10-09 | PDF 131.7 KB |
| Exhibit B Block Diagram per 2 1033 b5 Metadata only | Block Diagram | PDF 441 KB | |
| Exhibit B Schematics per 2 1033 c10 Metadata only | Schematics | PDF 398.1 KB | |
| Exhibit B Operational Description per 2 1033 c 4 5 6 7 8 9 13 Metadata only | Operational Description | PDF 128.6 KB |
Application Information
| Application ID | eXzxpW+44C+XmyQbYXikNw== |
|---|---|
| Final Action Date | 2004-01-28 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0003768611 |
| Model | TMAH6A |
| Frequency Range | 450-530 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | Mobile Transceiver |
| Responsible Party | Brian Emmett, Standards and Regulatory Manager, brian.emmett@taitradio.com , 64 3 358 0403 |
| Technical Contact | Stephen A Crompton, Tait Electronics Ltd., steve.crompton@tait.co.nz , 64-3-3586635 |
| Non-Technical Contact | Stephen A Crompton, Tait Electronics Ltd., steve.crompton@tait.co.nz , 64-3-3586635 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power is conducted maximum. RF exposure compliance was evaluated using 2.15 dBi or 5.15 dBi vehicle-mount antennas only. Qualified end-users of this device must have the knowledge to control the exposure conditions of vehicle passengers, and of bystanders to ensure a minimum separation distance of 90 cm is maintained between the antenna and persons outside of the vehicle for satisfying MPE compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 90 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device must be used with a maximum transmitting duty factor not exceeding 50% for satisfying RF exposure compliance. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work related use only. End-users must be provided with specific training instructions for meeting Occupational/Controlled Exposure Environment requirements. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| eXzxpW+44C+XmyQbYXikNw== | 2004-01-28 | Class II permissive change or modification of presently authorized equipment |
| peNb+N2DcuTqWDMfAHpaAw== | 2003-10-09 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 450-530 MHz | 25 | 1.5ppm | 11K0F3E | 22, 74, 90, 95A | BC |
| 450-530 MHz | 25 | 1.5ppm | 11K0F3E | 22, 9 | BC |
| 450-530 MHz | 25 | 1.5ppm | 16K0F3E | 22, 74, 90, 95A | BC |
| 450-530 MHz | 25 | 1.5ppm | 16K0F3E | 22, 9 | BC |
| 450-530 MHz | 25 | 1.5ppm | 4K8F2D | 22, 74, 90, 95A | BC |
| 450-530 MHz | 25 | 1.5ppm | 4K8F2D | 22, 9 | BC |
| 450-530 MHz | 25 | 1.5ppm | 8K4F2D | 22, 74, 90, 95A | BC |
| 450-530 MHz | 25 | 1.5ppm | 8K4F2D | 22, 9 | BC |
| 450-530 MHz | 25 | 1.5ppm | 12K0F1D | 22, 74, 90, 95A | BC |
| 450-530 MHz | 25 | 1.5ppm | 12K0F1D | 22, 9 | BC |
| 450-530 MHz | 25 | 1.5ppm | 19K6F1D | 22, 74, 90, 95A | BC |
| 450-530 MHz | 25 | 1.5ppm | 19K6F1D | 22, 9 | BC |
| 450-530 MHz | 25 | 1.5ppm | 8K50F1E | 22, 74, 95A, 90.21 | BC |
| 450-530 MHz | 25 | 1.5ppm | 8K50F1D | 22, 74, 95A, 90.21 | BC |
Grants
TCB Grant - Application peNb+N2DcuTqWDMfAHpaAw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515 |
Date of Grant: 10/09/2003 Application Dated: 10/09/2003 |
| Tait International Limited |
| 245 Wooldridge Road |
| HarewoodP.O. Box 1645, |
| Christchurch, 8051 New Zealand |
| Attention: Brian Emmett , Standards and Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CASTMAH6A |
| Name of Grantee: | Tait International Limited |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Mobile Transceiver |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 22, 90 | 450.0 - 530.0 | 25.0 | 1.5 PM | 11K0F3E |
| BC | 22, 90 | 450.0 - 530.0 | 25.0 | 1.5 PM | 16K0F3E |
| BC | 22, 90 | 450.0 - 530.0 | 25.0 | 1.5 PM | 4K8F2D |
| BC | 22, 90 | 450.0 - 530.0 | 25.0 | 1.5 PM | 8K4F2D |
| BC | 22, 90 | 450.0 - 530.0 | 25.0 | 1.5 PM | 12K0F1D |
| BC | 22, 90 | 450.0 - 530.0 | 25.0 | 1.5 PM | 19K6F1D |
| Output power is conducted maximum. RF exposure compliance was evaluated using 2.15 dBi or 5.15 dBi vehicle-mount antennas only. Qualified end-users of this device must have the knowledge to control the exposure conditions of vehicle passengers, and of bystanders to ensure a minimum separation distance of 90 cm is maintained between the antenna and persons outside of the vehicle for satisfying MPE compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 90 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device must be used with a maximum transmitting duty factor not exceeding 50% for satisfying RF exposure compliance. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work related use only. End-users must be provided with specific training instructions for meeting Occupational/Controlled Exposure Environment requirements. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
EAS Grant - Application peNb+N2DcuTqWDMfAHpaAw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tait International Limited 245 Wooldridge Road HarewoodP.O. Box 1645, Christchurch, 8051 New Zealand |
Date of Grant: 10/09/2003 Application Dated: 10/09/2003 |
| Attention: Brian Emmett , Standards and Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CASTMAH6A |
| Name of Grantee: | Tait International Limited |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Mobile Transceiver |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 22, 90 | 450.0 - 530.0 | 25.0 | 1.5 PM | 11K0F3E |
| BC | 22, 90 | 450.0 - 530.0 | 25.0 | 1.5 PM | 16K0F3E |
| BC | 22, 90 | 450.0 - 530.0 | 25.0 | 1.5 PM | 4K8F2D |
| BC | 22, 90 | 450.0 - 530.0 | 25.0 | 1.5 PM | 8K4F2D |
| BC | 22, 90 | 450.0 - 530.0 | 25.0 | 1.5 PM | 12K0F1D |
| BC | 22, 90 | 450.0 - 530.0 | 25.0 | 1.5 PM | 19K6F1D |
| Output power is conducted maximum. RF exposure compliance was evaluated using 2.15 dBi or 5.15 dBi vehicle-mount antennas only. Qualified end-users of this device must have the knowledge to control the exposure conditions of vehicle passengers, and of bystanders to ensure a minimum separation distance of 90 cm is maintained between the antenna and persons outside of the vehicle for satisfying MPE compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 90 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device must be used with a maximum transmitting duty factor not exceeding 50% for satisfying RF exposure compliance. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work related use only. End-users must be provided with specific training instructions for meeting Occupational/Controlled Exposure Environment requirements. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tait International Limited 245 Wooldridge Road HarewoodP.O. Box 1645, Christchurch, 8051 New Zealand |
Date of Grant: 01/28/2004 Application Dated: 12/15/2003 |
| Attention: Brian Emmett , Standards and Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CASTMAH6A |
| Name of Grantee: | Tait International Limited |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Mobile Transceiver |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 22, 74, 90, 95A | 450.0 - 530.0 | 25.0 | 1.5 PM | 11K0F3E |
| BC | 22, 74, 90, 95A | 450.0 - 530.0 | 25.0 | 1.5 PM | 16K0F3E |
| BC | 22, 74, 90, 95A | 450.0 - 530.0 | 25.0 | 1.5 PM | 4K8F2D |
| BC | 22, 74, 90, 95A | 450.0 - 530.0 | 25.0 | 1.5 PM | 8K4F2D |
| BC | 22, 74, 90, 95A | 450.0 - 530.0 | 25.0 | 1.5 PM | 12K0F1D |
| BC | 22, 74, 90, 95A | 450.0 - 530.0 | 25.0 | 1.5 PM | 19K6F1D |
| BC | 22, 74, 95A, 90.210 | 450.0 - 530.0 | 25.0 | 1.5 PM | 8K50F1E |
| BC | 22, 74, 95A, 90.210 | 450.0 - 530.0 | 25.0 | 1.5 PM | 8K50F1D |
| Part 90.210 is single channel mode. |
| Output power is conducted maximum. RF exposure compliance was evaluated using 2.15 dBi or 5.15 dBi vehicle-mount antennas only. Qualified end-users of this device must have the knowledge to control the exposure conditions of vehicle passengers, and of bystanders to ensure a minimum separation distance of 90 cm is maintained between the antenna and persons outside of the vehicle for satisfying MPE compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 90 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device must be used with a maximum transmitting duty factor not exceeding 50% for satisfying RF exposure compliance. The operation of this transmitter must satisfy the requirements of Occupational/Controlled Exposure Environment, for work related use only. End-users must be provided with specific training instructions for meeting Occupational/Controlled Exposure Environment requirements. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
| Mail To: |
| Scott Quintavalle, Engineering Manager |
| Tait North America Inc. |
| Building 1, Suite 450 15740 Park Row |
| Houston, TX 77084 |