FCC ID CASTPAB1A
Portable Handheld Transceiver
by Tait Limited
Grantee Code: CAS Product Code: TPAB1A
Latest application date: 2007-05-17
FCC ID Device Details
| FCC ID | CASTPAB1A |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | CAS |
| Product Code | TPAB1A |
| Applicant Business | Tait Limited 🇳🇿 |
| Related Domains |  taitradio.com |
| Equipment Class | Portable Handheld Transceiver |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 150.8-173.4 MHz | Class II permissive change or modification of presently authorized equipment | 2007-05-17 |
| 136-174 MHz | Original Equipment | 2004-12-23 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Guide | Users Manual | 2004-12-23 | PDF 246.9 KB |
| Internal Front Cover | Internal Photos | 2004-12-23 | PDF 260.8 KB |
| Internal Inside Front | Internal Photos | 2004-12-23 | PDF 124.8 KB |
| Internal PCB Bottom View | Internal Photos | 2004-12-23 | PDF 237.5 KB |
| Internal PCB Top View | Internal Photos | 2004-12-23 | PDF 220.9 KB |
| Internal Rear Cover | Internal Photos | 2004-12-23 | PDF 171.4 KB |
| External Back View | External Photos | 2004-12-23 | PDF 196.1 KB |
| External Front View | External Photos | 2004-12-23 | PDF 293.6 KB |
| External Leftside View | External Photos | 2004-12-23 | PDF 208.6 KB |
| External Rightside View | External Photos | 2004-12-23 | PDF 262 KB |
| External Top View | External Photos | 2004-12-23 | PDF 175.4 KB |
| Compliance Label | ID Label/Location Info | 2004-12-23 | PDF 95.4 KB |
| Test Setup | Test Setup Photos | 2004-12-23 | PDF 309.2 KB |
| Exhibit E Test Measurement Report per 2 1033 c14 | Test Report | 2007-05-17 | PDF 436 KB |
| Radio Test Report | Test Report | 2004-12-23 | PDF 391 KB |
| Cover Letter Requesting Class II Permissive Change | Cover Letter(s) | 2007-05-17 | PDF 139.8 KB |
| Cover Letter to Justify Extended Frequency Ranges | Cover Letter(s) | 2007-05-17 | PDF 49.5 KB |
| Application Letter | Cover Letter(s) | 2004-12-23 | PDF 125.5 KB |
| Confidentiality Letter | Cover Letter(s) | 2004-12-23 | PDF 187.5 KB |
| Programming Statement | Cover Letter(s) | 2004-12-23 | PDF 66.6 KB |
| SAR Report Part 1 | RF Exposure Info | 2004-12-23 | PDF 814.2 KB |
| SAR Report Part 2 | RF Exposure Info | 2004-12-23 | PDF 1.3 MB |
| SAR Report Part 3 | RF Exposure Info | 2004-12-23 | PDF 1.1 MB |
| SAR Report Part 4 | RF Exposure Info | 2004-12-23 | PDF 865.1 KB |
| SAR Report Part 5 | RF Exposure Info | 2004-12-23 | PDF 932.5 KB |
| SAR Report Part 6 | RF Exposure Info | 2004-12-23 | PDF 1.5 MB |
| SAR Report Part 7 | RF Exposure Info | 2004-12-23 | PDF 325.6 KB |
Application Information
| Application ID | aZQh/cKX1FjVwp6zis/+0A== |
|---|---|
| Final Action Date | 2007-05-17 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0003768611 |
| Model | TPAB1A |
| Frequency Range | 150.8-173.4 MHz |
| Equipment Class | TNF - Licensed Non-Broadcast Transmitter Held to Face |
| Device Description | Portable Handheld Transceiver |
| Responsible Party | David Jackson, Test Laboratory Services Manager, david.jackson@taitradio.com , 64 3 357 0283 |
| TCB Email | decrowder@elitetest.com  |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. This transmitter may operate with the antennas and microphone speaker antenna listed in the filing in push-to-talk held-to-face and body-worn configurations. Body-worn SAR compliance is limited to the specific accessory and speaker/microphone configurations listed in the filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label must be displayed on the device to direct users to specific training information for meeting Occupational exposure requirements and users must be provided with the training information. The highest reported SAR values (50% duty factor) are: head 1.4 W/kg; body-worn 4.11 W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| aZQh/cKX1FjVwp6zis/+0A== | 2007-05-17 | Class II permissive change or modification of presently authorized equipment |
| 1xwE5JUNokIyktuTLuEjqg== | 2004-12-23 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 136-174 MHz | 5 | 1.5ppm | 10K0F7E | 22, 74, 90.21 | BF |
| 136-174 MHz | 5 | 1.5ppm | 8K10F1D | 22, 74, 90.21 | BF |
| 136-174 MHz | 5 | 1.5ppm | 8K10F7D | 22, 74, 90.21 | BF |
| 136-174 MHz | 5 | 1.5ppm | 10K0F1D | 22, 74, 90.21 | BF |
| 136-174 MHz | 5 | 1.5ppm | 10K0F7D | 22, 74, 90.21 | BF |
| 136-174 MHz | 5 | 1.5ppm | 16K0F3E | 22, 74, 9 | BF |
| 136-174 MHz | 5 | 1.5ppm | 4K80F2D | 22, 74, 90.21 | BF |
| 136-174 MHz | 5 | 1.5ppm | 8K40F2D | 22, 74, 90.21 | BF |
| 136-174 MHz | 5 | 1.5ppm | 7K80F1D | 22, 74, 90.21 | BF |
| 136-174 MHz | 5 | 1.5ppm | 12K3F1D | 22, 74, 90.21 | BF |
| 136-174 MHz | 5 | 1.5ppm | 8K10F1E | 22, 90.210, 74 | BF |
| 136-174 MHz | 5 | 1.5ppm | 8K10F7E | 22, 74, 90.21 | BF |
| 136-174 MHz | 5 | 1.5ppm | 10K0F1E | 22, 74, 90.21 | BF |
| 150.8-173.4 MHz | 5 | 1.5ppm | 8K10F7D | 22, 74, 90, 90.21 | BF, EF |
| 150.8-173.4 MHz | 5 | 1.5ppm | 10K0F1E | 22, 74, 90, 90.21 | BF, EF |
| 150.8-173.4 MHz | 5 | 1.5ppm | 10K0F7E | 22, 74, 90, 90.21 | BF, EF |
| 150.8-173.4 MHz | 5 | 1.5ppm | 10K0F1D | 22, 74, 90, 90.21 | BF, EF |
| 150.8-173.4 MHz | 5 | 1.5ppm | 10K0F7D | 22, 74, 90, 90.21 | BF, EF |
| 150.8-173.4 MHz | 5 | 1.5ppm | 6K10F1D | 22, 74, 90, 90.21 | BF, EF |
| 150.8-173.4 MHz | 5 | 1.5ppm | 16K0F3E | 22, 74, 90, 90.21 | BF, EF |
| 150.8-173.4 MHz | 5 | 1.5ppm | 6K60F2D | 22, 74, 90, 90.21 | BF, EF |
| 150.8-173.4 MHz | 5 | 1.5ppm | 9K60F2D | 22, 74, 90, 90.21 | BF, EF |
| 150.8-173.4 MHz | 5 | 1.5ppm | 7K70F1D | 22, 74, 90, 90.21 | BF, EF |
| 150.8-173.4 MHz | 5 | 1.5ppm | 12K7F1D | 22, 74, 90, 90.21 | BF, EF |
| 150.8-173.4 MHz | 5 | 1.5ppm | 8K10F1E | 22, 74, 90, 90.21 | BF, EF |
| 150.8-173.4 MHz | 5 | 1.5ppm | 8K10F7E | 22, 74, 90, 90.21 | BF, EF |
| 150.8-173.4 MHz | 5 | 1.5ppm | 8K10F1D | 22, 74, 90, 90.21 | BF, EF |
Grants
TCB Grant - Application aZQh/cKX1FjVwp6zis/+0A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515 | Date of Grant: 05/17/2007 Application Dated: 05/17/2007 |
| Tait Limited |
| 535 Wairakei Rd |
| P.O. Box 1645, |
| Christchurch, 8140 New Zealand |
| Attention: David Jackson , Test Laboratory Services Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CASTPAB1A |
| Name of Grantee: | Tait Limited |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | Portable Handheld Transceiver |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 11K0F3E |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 16K0F3E |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 6K60F2D |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 9K60F2D |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 7K70F1D |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 12K7F1D |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 8K10F1E |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 8K10F7E |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 8K10F1D |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 8K10F7D |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 10K0F1E |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 10K0F7E |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 10K0F1D |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 10K0F7D |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 6K10F1D |
| Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. This transmitter may operate with the antennas and microphone speaker antenna listed in the filing in push-to-talk held-to-face and body-worn configurations. Body-worn SAR compliance is limited to the specific accessory and speaker/microphone configurations listed in the filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label must be displayed on the device to direct users to specific training information for meeting Occupational exposure requirements and users must be provided with the training information. The highest reported SAR values (50% duty factor) are: head 1.4 W/kg; body-worn 4.11 W/kg. |
| BF: | The output power is continuously variable from the value listed in this entry to 20%-25% of the value listed. |
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
EAS Grant - Application aZQh/cKX1FjVwp6zis/+0A==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Tait Limited 535 Wairakei Rd P.O. Box 1645, Christchurch, 8140 New Zealand | Date of Grant: 05/17/2007 Application Dated: 05/17/2007 |
| Attention: David Jackson , Test Laboratory Services Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CASTPAB1A |
| Name of Grantee: | Tait Limited |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | Portable Handheld Transceiver |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 11K0F3E |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 16K0F3E |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 6K60F2D |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 9K60F2D |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 7K70F1D |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 12K7F1D |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 8K10F1E |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 8K10F7E |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 8K10F1D |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 8K10F7D |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 10K0F1E |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 10K0F7E |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 10K0F1D |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 10K0F7D |
| BF EF | 22, 74, 90, 90.210 | 150.8 - 173.4 | 5.0 | 1.5 PM | 6K10F1D |
| Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. This transmitter may operate with the antennas and microphone speaker antenna listed in the filing in push-to-talk held-to-face and body-worn configurations. Body-worn SAR compliance is limited to the specific accessory and speaker/microphone configurations listed in the filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label must be displayed on the device to direct users to specific training information for meeting Occupational exposure requirements and users must be provided with the training information. The highest reported SAR values (50% duty factor) are: head 1.4 W/kg; body-worn 4.11 W/kg.
|
| BF: | The output power is continuously variable from the value listed in this entry to 20%-25% of the value listed. |
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
| Mail To: |
| EA275535 |
TCB Grant - Application 1xwE5JUNokIyktuTLuEjqg==
This application does not exist.
EAS Grant - Application 1xwE5JUNokIyktuTLuEjqg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tait International Limited 245 Wooldridge Road HarewoodP.O. Box 1645, Christchurch, 8051 New Zealand |
Date of Grant: 12/23/2004 Application Dated: 09/27/2004 |
| Attention: Brian Emmett , Standards and Regulatory Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | CASTPAB1A |
| Name of Grantee: | Tait International Limited |
| Equipment Class: | Licensed Non-Broadcast Transmitter Held to Face |
| Notes: | Portable Transceiver |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BF | 22, 74, 90.210 | 136.0 - 174.0 | 5.0 | 1.5 PM | 11K0F3E |
| BF | 22, 74, 90 | 136.0 - 174.0 | 5.0 | 1.5 PM | 16K0F3E |
| BF | 22, 74, 90.210 | 136.0 - 174.0 | 5.0 | 1.5 PM | 4K80F2D |
| BF | 22, 74, 90.210 | 136.0 - 174.0 | 5.0 | 1.5 PM | 8K40F2D |
| BF | 22, 74, 90.210 | 136.0 - 174.0 | 5.0 | 1.5 PM | 7K80F1D |
| BF | 22, 74, 90.210 | 136.0 - 174.0 | 5.0 | 1.5 PM | 12K3F1D |
| BF | 22, 74, 90.210 | 136.0 - 174.0 | 5.0 | 1.5 PM | 8K10F1E |
| BF | 22, 74, 90.210 | 136.0 - 174.0 | 5.0 | 1.5 PM | 8K10F7E |
| BF | 22, 74, 90.210 | 136.0 - 174.0 | 5.0 | 1.5 PM | 10K0F1E |
| BF | 22, 74, 90.210 | 136.0 - 174.0 | 5.0 | 1.5 PM | 10K0F7E |
| BF | 22, 74, 90.210 | 136.0 - 174.0 | 5.0 | 1.5 PM | 8K10F1D |
| BF | 22, 74, 90.210 | 136.0 - 174.0 | 5.0 | 1.5 PM | 8K10F7D |
| BF | 22, 74, 90.210 | 136.0 - 174.0 | 5.0 | 1.5 PM | 10K0F1D |
| BF | 22, 74, 90.210 | 136.0 - 174.0 | 5.0 | 1.5 PM | 10K0F7D |
| Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. This transmitter may operate with the antennas and microphone speaker antenna listed in the filing in push-to-talk held-to-face and body-worn configurations. Body-worn SAR compliance is limited to the specific accessory and speaker/microphone configurations listed in the filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label must be displayed on the device to direct users to specific training information for meeting Occupational exposure requirements and users must be provided with the training information. The highest reported SAR values (50% duty factor) are: head 1.4 W/kg; body-worn 4.11 W/kg. |
| This application was originally granted on 11/24/2004. |
| BF: | The output power is continuously variable from the value listed in this entry to 20%-25% of the value listed. |
| Mail To: |